Uniaxial compressive response of cement mortar with waste aluminium fibre sourced from electrical distribution cables

Electrical distribution and communication cables cease to function for transmission when their length is insufficient, and it is considered as it approaches the end of their useful lives. Further, the disposal techniques are not eco-friendly. This study aimed to evaluate the feasibility of cement mortar systems with the inclusion of aluminium fibre extracted from electrical distribution cables. Two diameters of 1.35 mm and 1.70 mm and two lengths of 10 mm and 15 mm fibres were used while incorporating four volume ratios, particularly 0.5%, 1.0%, 1.5%, and 2.0% to evaluate the effect of the length, diameter and volume ratios. The compression test and density test were performed to study the behaviour of Metal Fibre Reinforced Mortar (MFRM) systems under both dry and wet states. Compared to conventional mortar, the ultimate compressive strength of MFRM systems was increased up to 39.4% in 1.5% of fibre addition under the 28-day dry state, where the 1.5% volume ratio showed the best performance under compressive loads. Strain at ultimate strength, modulus of elasticity and strain energy also showed improvements with the fibre inclusion up to 74.4%, 87.3%, and 106.6% respectively. Fibres with higher aspect ratios showed significant effectiveness among the aforementioned fibre variations. The overall results highlighted that the MFRM with 1.5% of fibres performed expertly with 15 mm length and 1.35 mm diameter under compression loads.