The use of β titanium alloys in the aerospace industry

R. R. Boyer, R. D. Briggs

Research output: Contribution to journalArticleResearchpeer-review

68 Citations (Scopus)


Beta titanium alloys have been available since the 1950s (Ti-13V-llCr-3Mo or B120VCA), but significant applications of these alloys, beyond the SR-71 Blackbird, have been slow in coming. The next significant usage of a p alloy did not occur until the mid-1980s on the B-1B bomber. This aircraft used Ti-15V-3Cr-3Al-3Sn sheet due to its capability for strip rolling, improved formability. and higher strength than Ti-6A1-4V. The next major usage was on a commercial aircraft, the Boeing 777, which made extensive use of Ti-10V-2Fe-3Al high-strength forgings. Ti-15V-3Cr-3AI-3Sn environmental control system ducting, castings, and springs were also used, along with Ti-3Al-8V-6Cr-4Mo-4Zr Ip-C) springs. Beta-21S was also introduced for high-temperature usage. More recent work at Boeing has focused on the development of Ti-5AI-5Mo-5V-3Cr, a high-strength alloy that can be used at higher strength than Ti-10V-2Fe-3Al and is much more robust; it has a much wider, or friendlier, processing window. This, along with additional studies at Boeing, and from within the aerospace industry in general will be discussed in detail, summarizing applications and the rationale for the selection {of this alloy system for aerospace applications.

Original languageEnglish
Pages (from-to)2916-2920
Number of pages5
JournalJournal of Materials Engineering and Performance
Issue number10
Publication statusPublished - 1 Oct 2013
Externally publishedYes


  • forgings
  • Ti-10V-2Fe-3Al
  • Ti-5Al-5Mo-5V-3Cr

Cite this