Orthogonal time division multiplexing (OrthTDM) interleaves sinc-shaped pulses to form a high baud-rate signal, with a rectangular spectrum suitable for multiplexing into a Nyquist WDM (N-WDM)-likesignal. The problem with generating sinc-shaped pulses is that they theoretically have infinite durations, and even if time bounded for practical implementation, they still require a filter with a long impulse response, hence a large physical size. Previously a method of creating chirped-orthogonal frequency division multiplexing (OFDM) pulses with a chirped arrayed waveguide (AWG) filter, then converting them into interleaved quasi-sinc pulses using dispersive fiber (DF), has been proposed. This produces a signal with a wider spectrum than the equivalent N-WDM signal. We show that a modification to the scheme enables the spectral extent to be reduced for the same data rate. We then analyse the key factors in designing an OrthTDM transmitter, and relate these to the performance of a N-WDM system. We show that the modified transmitter reduces the required guard band between the N-WDM channels. We also simulate a simpler scheme using an unchirped finite-impulse response filter of similar size, which directly creates truncated-sinc pulses without needing a DF. This gives better system performance than either chirped scheme.