Strengthening of the panel zone in steel moment-resisting frames

Masoud Abedini, Sudharshan N. Raman, Azrul A. Mutalib, Ebrahim Akhlaghi

Research output: Contribution to journalArticleResearchpeer-review

1 Citation (Scopus)

Abstract

Rehabilitation and retrofitting of structures designed in accordance to standard design codes is an essential practice in structural engineering and design. For steel structures, one of the challenges is to strengthen the panel zone as well as its analysis in moment-resisting frames. In this research, investigations were undertaken to analyze the influence of the panel zone in the response of structural frames through a computational approach using ETABS software. Moment-resisting frames of six stories were studied in supposition of real panel zone, different values of rigid zone factor, different thickness of double plates, and both double plates and rigid zone factor together. The frames were analyzed, designed and validated in accordance to Iranian steel building code. The results of drift values for six stories building models were plotted. After verifying and comparing the results, the findings showed that the rigidity lead to reduction in drifts of frames and also as a result, lower rigidity will be used for high rise building and higher rigidity will be used for low rise building. In frames with story drifts more than the permitted rate, where the frames are considered as the weaker panel zone area, the story drifts can be limited by strengthening the panel zone with double plates. It should be noted that higher thickness of double plates and higher rigidity of panel zone will result in enhancement of the non-linear deformation rates in beam elements. The resulting deformations of the panel zone due to this modification can have significant influence on the elastic and inelastic behavior of the frames.

Original languageEnglish
Pages (from-to)327-342
Number of pages16
JournalAdvances in Computational Design
Volume4
Issue number4
DOIs
Publication statusPublished - Oct 2019
Externally publishedYes

Keywords

  • Double plates
  • Lateral drift
  • Moment-resisting frames
  • Panel zone
  • Rigid zone factor
  • Rigidity
  • Steel structure

Cite this