Skip to main navigation Skip to search Skip to main content

Residual stress mapping in railway rails

Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Other

Abstract

Residual stress has been mapped in the heads of ex-service railway rails. Three normal grade rails and one mill-heat-treated (MHT) rail were examined. Transverse, vertical and in-plane shear stresses were deduced using energy dispersive synchrotron X-ray, magnetic permeability and laboratory X-ray measurements. Differences were found between samples both in the distribution of compressive stress introduced at the running surface, and in the locations of the balancing tensile stress below this. The mill heat treated rail was found to have tensile stress closer to the gauge corner than the other rails. While the effect of residual stress in rails must be considered alongside the transient stresses present during wheel passage, tensile residual stresses close to the running surface are believed to be detrimental to rail integrity.

Original languageEnglish
Title of host publicationResidual Stresses VII, ICRS 7 - Proceedings of the 7th International Conference on Residual Stresses, ICRS-7
PublisherTrans Tech Publications
Pages165-170
Number of pages6
ISBN (Print)0878499695, 9780878499694
DOIs
Publication statusPublished - 2005
Externally publishedYes
EventInternational Conference on Residual Stresses 2004 - Xi'an, China
Duration: 14 Jun 2004 → 17 Jun 2004
Conference number: 7th
https://dl.asminternational.org/icrs/pages/About

Publication series

NameMaterials Science Forum
Volume490-491
ISSN (Print)0255-5476
ISSN (Electronic)1662-9752

Conference

ConferenceInternational Conference on Residual Stresses 2004
Abbreviated titleICRS-7
Country/TerritoryChina
CityXi'an
Period14/06/04 → 17/06/04
Internet address

Keywords

  • Magnetic permeability
  • Mill heat treated rail
  • Railway rails
  • Rolling contact fatigue
  • Synchrotron
  • X-ray diffraction

Cite this