Skip to main navigation Skip to search Skip to main content

Microstructure, morphology and electrochemical properties of Co nanoflake water oxidation electrocatalyst at micro- and nanoscale

  • Naimeh Naseri
  • , Shahram Solaymani
  • , Atefeh Ghaderi
  • , Miroslaw Bramowicz
  • , Slawomir Kulesza
  • , Ştefan Ţălu
  • , Mohammad Pourreza
  • , Shahnaz Ghasemi

Research output: Contribution to journal › Article › Research › peer-review

Abstract

Nowadays, fossil fuel limitations and environmental concerns push researchers to find clean and renewable energy resources. Solar hydrogen production via water splitting reactions in electrochemical and/or photo-electrochemical systems has been accepted as a promising route and efficient electrocatalysts are involved in both. Here, cobalt nanoflakes with an oxide/hydroxide surface and a conductive metallic core are grown on commercially available steel mesh modified with carbon based nanocomposites as a support layer. The portion of reduced graphene oxide sheets was changed from 0 to 100 wt% and the correlation of this concentration with the surface morphology and electro-catalytic activity of the final electrode was studied systematically for the first time. Obtained results revealed the least over potential (224.2 mV) for the sample with 50 wt% rGO in the water splitting reaction which is promising for use in alkaline electrolysis devices.

Original languageEnglish
Pages (from-to)12923-12930
Number of pages8
JournalRSC Advances
Volume7
Issue number21
DOIs
Publication statusPublished - 2017
Externally publishedYes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Cite this