Evaluation of alternative intersection treatments at rural crossroads using simulation software

Sujanie Peiris, Bruce Corben, Michael Nieuwesteeg, Hampton C. Gabler, Andrew Morris, Diana Bowman, Michael G. Lenné, Michael Fitzharris

Research output: Contribution to journalArticleResearchpeer-review

Abstract

Objective: Rural roads are characterized by hazardous roadsides and suboptimal geometry yet allow for high travel speeds and unfavorable impact angles. In Victoria, 25% of persons seriously injured and 52% of fatalities occur on rural roads, with 30% occurring at intersections. In the United States, almost twice the number of traffic fatalities occur in rural areas than in urban areas, while accounting for less than half of all vehicle miles traveled and 21% of the population. The choice of safety countermeasure is therefore paramount. Simulation software provides a cost-effective means of analyzing alternative intersection treatments with a view to identifying their effectiveness in mitigating crashes. The aim of this research was to assess the safety benefits of 4 alternative intersection treatments using in-depth crash data with an advanced crash reconstruction process. Method: Using a single serious injury real-world crash from the Monash University Accident Research Centre Enhanced Crash Investigation Study and crash reconstruction software, an exemplar rural crash was reconstructed and validated against real-world data. The crash involved a passenger vehicle (European New Car Assessment Programme 5-star) approaching from a minor road and failing to yield at a give-way sign; the posted speed limit was 80 km/h. The vehicle was struck on the right/driver side by a rigid truck (B-vehicle; 1990) traveling on the major approach (100 km/h). The driver of the case vehicle was seriously injured. Four alternative intersection treatments appropriate for the crash site were constructed in computer-aided design software (Rhinoceros Ver. 5): roundabout; rumble strips; a reduced speed limit; and the combination of lower speed limit and rumbles to determine the reduction in crash forces in the presence of the countermeasures. Results: The hypothetical scenarios demonstrate substantial reductions in impact force and different points of impact, resulting in a significantly lower injury severity for the struck driver. Speed limit reduction to 80 km/h on the main approach (from 100 km/h) in combination with rumble strips on both intersection approaches had the most favorable outcome with the crash avoided entirely, assuming speed compliance. Discussion: The findings have implications for understanding the role of speed in crashes and hence the design of effective countermeasures. Simulation software, validated using real-world data, provides a cost-effective means of evaluating alternative intersection treatments for rural intersections. Scaled up, implementing these treatments would have significant safety benefits and reduce the road trauma currently associated with rural roads.

Original languageEnglish
Pages (from-to)S1-S7
Number of pages7
JournalTraffic Injury Prevention
Volume19
Issue numberS2
DOIs
Publication statusPublished - 2018

Keywords

  • countermeasures
  • Reconstructions
  • roundabout
  • rural
  • speed reduction

Cite this

Peiris, Sujanie ; Corben, Bruce ; Nieuwesteeg, Michael ; Gabler, Hampton C. ; Morris, Andrew ; Bowman, Diana ; Lenné, Michael G. ; Fitzharris, Michael. / Evaluation of alternative intersection treatments at rural crossroads using simulation software. In: Traffic Injury Prevention. 2018 ; Vol. 19, No. S2. pp. S1-S7.
@article{d2f7ad94ac774e8d92d20853b180f79b,
title = "Evaluation of alternative intersection treatments at rural crossroads using simulation software",
abstract = "Objective: Rural roads are characterized by hazardous roadsides and suboptimal geometry yet allow for high travel speeds and unfavorable impact angles. In Victoria, 25{\%} of persons seriously injured and 52{\%} of fatalities occur on rural roads, with 30{\%} occurring at intersections. In the United States, almost twice the number of traffic fatalities occur in rural areas than in urban areas, while accounting for less than half of all vehicle miles traveled and 21{\%} of the population. The choice of safety countermeasure is therefore paramount. Simulation software provides a cost-effective means of analyzing alternative intersection treatments with a view to identifying their effectiveness in mitigating crashes. The aim of this research was to assess the safety benefits of 4 alternative intersection treatments using in-depth crash data with an advanced crash reconstruction process. Method: Using a single serious injury real-world crash from the Monash University Accident Research Centre Enhanced Crash Investigation Study and crash reconstruction software, an exemplar rural crash was reconstructed and validated against real-world data. The crash involved a passenger vehicle (European New Car Assessment Programme 5-star) approaching from a minor road and failing to yield at a give-way sign; the posted speed limit was 80 km/h. The vehicle was struck on the right/driver side by a rigid truck (B-vehicle; 1990) traveling on the major approach (100 km/h). The driver of the case vehicle was seriously injured. Four alternative intersection treatments appropriate for the crash site were constructed in computer-aided design software (Rhinoceros Ver. 5): roundabout; rumble strips; a reduced speed limit; and the combination of lower speed limit and rumbles to determine the reduction in crash forces in the presence of the countermeasures. Results: The hypothetical scenarios demonstrate substantial reductions in impact force and different points of impact, resulting in a significantly lower injury severity for the struck driver. Speed limit reduction to 80 km/h on the main approach (from 100 km/h) in combination with rumble strips on both intersection approaches had the most favorable outcome with the crash avoided entirely, assuming speed compliance. Discussion: The findings have implications for understanding the role of speed in crashes and hence the design of effective countermeasures. Simulation software, validated using real-world data, provides a cost-effective means of evaluating alternative intersection treatments for rural intersections. Scaled up, implementing these treatments would have significant safety benefits and reduce the road trauma currently associated with rural roads.",
keywords = "countermeasures, Reconstructions, roundabout, rural, speed reduction",
author = "Sujanie Peiris and Bruce Corben and Michael Nieuwesteeg and Gabler, {Hampton C.} and Andrew Morris and Diana Bowman and Lenn{\'e}, {Michael G.} and Michael Fitzharris",
year = "2018",
doi = "10.1080/15389588.2018.1528357",
language = "English",
volume = "19",
pages = "S1--S7",
journal = "Traffic Injury Prevention",
issn = "1538-9588",
publisher = "Taylor & Francis",
number = "S2",

}

Peiris, S, Corben, B, Nieuwesteeg, M, Gabler, HC, Morris, A, Bowman, D, Lenné, MG & Fitzharris, M 2018, 'Evaluation of alternative intersection treatments at rural crossroads using simulation software' Traffic Injury Prevention, vol. 19, no. S2, pp. S1-S7. https://doi.org/10.1080/15389588.2018.1528357

Evaluation of alternative intersection treatments at rural crossroads using simulation software. / Peiris, Sujanie; Corben, Bruce; Nieuwesteeg, Michael; Gabler, Hampton C.; Morris, Andrew; Bowman, Diana; Lenné, Michael G.; Fitzharris, Michael.

In: Traffic Injury Prevention, Vol. 19, No. S2, 2018, p. S1-S7.

Research output: Contribution to journalArticleResearchpeer-review

TY - JOUR

T1 - Evaluation of alternative intersection treatments at rural crossroads using simulation software

AU - Peiris, Sujanie

AU - Corben, Bruce

AU - Nieuwesteeg, Michael

AU - Gabler, Hampton C.

AU - Morris, Andrew

AU - Bowman, Diana

AU - Lenné, Michael G.

AU - Fitzharris, Michael

PY - 2018

Y1 - 2018

N2 - Objective: Rural roads are characterized by hazardous roadsides and suboptimal geometry yet allow for high travel speeds and unfavorable impact angles. In Victoria, 25% of persons seriously injured and 52% of fatalities occur on rural roads, with 30% occurring at intersections. In the United States, almost twice the number of traffic fatalities occur in rural areas than in urban areas, while accounting for less than half of all vehicle miles traveled and 21% of the population. The choice of safety countermeasure is therefore paramount. Simulation software provides a cost-effective means of analyzing alternative intersection treatments with a view to identifying their effectiveness in mitigating crashes. The aim of this research was to assess the safety benefits of 4 alternative intersection treatments using in-depth crash data with an advanced crash reconstruction process. Method: Using a single serious injury real-world crash from the Monash University Accident Research Centre Enhanced Crash Investigation Study and crash reconstruction software, an exemplar rural crash was reconstructed and validated against real-world data. The crash involved a passenger vehicle (European New Car Assessment Programme 5-star) approaching from a minor road and failing to yield at a give-way sign; the posted speed limit was 80 km/h. The vehicle was struck on the right/driver side by a rigid truck (B-vehicle; 1990) traveling on the major approach (100 km/h). The driver of the case vehicle was seriously injured. Four alternative intersection treatments appropriate for the crash site were constructed in computer-aided design software (Rhinoceros Ver. 5): roundabout; rumble strips; a reduced speed limit; and the combination of lower speed limit and rumbles to determine the reduction in crash forces in the presence of the countermeasures. Results: The hypothetical scenarios demonstrate substantial reductions in impact force and different points of impact, resulting in a significantly lower injury severity for the struck driver. Speed limit reduction to 80 km/h on the main approach (from 100 km/h) in combination with rumble strips on both intersection approaches had the most favorable outcome with the crash avoided entirely, assuming speed compliance. Discussion: The findings have implications for understanding the role of speed in crashes and hence the design of effective countermeasures. Simulation software, validated using real-world data, provides a cost-effective means of evaluating alternative intersection treatments for rural intersections. Scaled up, implementing these treatments would have significant safety benefits and reduce the road trauma currently associated with rural roads.

AB - Objective: Rural roads are characterized by hazardous roadsides and suboptimal geometry yet allow for high travel speeds and unfavorable impact angles. In Victoria, 25% of persons seriously injured and 52% of fatalities occur on rural roads, with 30% occurring at intersections. In the United States, almost twice the number of traffic fatalities occur in rural areas than in urban areas, while accounting for less than half of all vehicle miles traveled and 21% of the population. The choice of safety countermeasure is therefore paramount. Simulation software provides a cost-effective means of analyzing alternative intersection treatments with a view to identifying their effectiveness in mitigating crashes. The aim of this research was to assess the safety benefits of 4 alternative intersection treatments using in-depth crash data with an advanced crash reconstruction process. Method: Using a single serious injury real-world crash from the Monash University Accident Research Centre Enhanced Crash Investigation Study and crash reconstruction software, an exemplar rural crash was reconstructed and validated against real-world data. The crash involved a passenger vehicle (European New Car Assessment Programme 5-star) approaching from a minor road and failing to yield at a give-way sign; the posted speed limit was 80 km/h. The vehicle was struck on the right/driver side by a rigid truck (B-vehicle; 1990) traveling on the major approach (100 km/h). The driver of the case vehicle was seriously injured. Four alternative intersection treatments appropriate for the crash site were constructed in computer-aided design software (Rhinoceros Ver. 5): roundabout; rumble strips; a reduced speed limit; and the combination of lower speed limit and rumbles to determine the reduction in crash forces in the presence of the countermeasures. Results: The hypothetical scenarios demonstrate substantial reductions in impact force and different points of impact, resulting in a significantly lower injury severity for the struck driver. Speed limit reduction to 80 km/h on the main approach (from 100 km/h) in combination with rumble strips on both intersection approaches had the most favorable outcome with the crash avoided entirely, assuming speed compliance. Discussion: The findings have implications for understanding the role of speed in crashes and hence the design of effective countermeasures. Simulation software, validated using real-world data, provides a cost-effective means of evaluating alternative intersection treatments for rural intersections. Scaled up, implementing these treatments would have significant safety benefits and reduce the road trauma currently associated with rural roads.

KW - countermeasures

KW - Reconstructions

KW - roundabout

KW - rural

KW - speed reduction

UR - http://www.scopus.com/inward/record.url?scp=85058708266&partnerID=8YFLogxK

U2 - 10.1080/15389588.2018.1528357

DO - 10.1080/15389588.2018.1528357

M3 - Article

VL - 19

SP - S1-S7

JO - Traffic Injury Prevention

JF - Traffic Injury Prevention

SN - 1538-9588

IS - S2

ER -