TY - JOUR
T1 - Enhancing interlaminar fracture toughness of woven carbon fibre/epoxy composites with engineering thermoplastic and carbon-based nanomaterials
AU - Tangthana-umrung, Kanokporn
AU - Mahmood, Humza
AU - Zhang, Xiaomeng
AU - Gresil, Matthieu
N1 - Funding Information:
The author wishes to acknowledge Ministry of Higher Education, Science, Research and Innovation, Royal Thai Government.
Publisher Copyright:
© 2021 Elsevier Ltd
PY - 2022/2/15
Y1 - 2022/2/15
N2 - Carbon fibre reinforced polymer (CFRP) composites based upon epoxy matrices containing polyethersulfone (PESU) and/or graphene nanoplatelets (GNPs) and/or multi-walled carbon nanotube (MWCNTs) were prepared by hand lay-up without any solvent. The influence of individual and hybrid toughened particles on flexural properties and mode I interlaminar fracture toughness were examined. The maximum value of normalised flexural strength (858 MPa) was measured for CFRP with PESU toughened epoxy. There are no noticeable changes in flexural modulus between all modified laminates. Mode-I interlaminar fracture toughness of crack initiation (GIc ini) and crack propagation (GIc prop) were enhanced when the matrices of laminates were toughened by whether thermoplastic or carbon-based nanomaterials. The epoxy laminates with 5 %wt PESU and a hybrid ratio of GNP/MWCNT 0.4/0.1 (%wt/%wt) exhibits the greatest GIc ini (228 J/m2) and excellent GIc prop (676 J/m2). Surface fracture revealed that this enhancement is due to the simultaneous toughening mechanism of PESU rich particles (crack deviation, crack pinning, debonding), GNPs (crack deviation), and MWCNTs (pull out). This work also evidences that it is important to introduce similar size of tougheners for improving interlaminar toughness of multifunctional CFRP composites.
AB - Carbon fibre reinforced polymer (CFRP) composites based upon epoxy matrices containing polyethersulfone (PESU) and/or graphene nanoplatelets (GNPs) and/or multi-walled carbon nanotube (MWCNTs) were prepared by hand lay-up without any solvent. The influence of individual and hybrid toughened particles on flexural properties and mode I interlaminar fracture toughness were examined. The maximum value of normalised flexural strength (858 MPa) was measured for CFRP with PESU toughened epoxy. There are no noticeable changes in flexural modulus between all modified laminates. Mode-I interlaminar fracture toughness of crack initiation (GIc ini) and crack propagation (GIc prop) were enhanced when the matrices of laminates were toughened by whether thermoplastic or carbon-based nanomaterials. The epoxy laminates with 5 %wt PESU and a hybrid ratio of GNP/MWCNT 0.4/0.1 (%wt/%wt) exhibits the greatest GIc ini (228 J/m2) and excellent GIc prop (676 J/m2). Surface fracture revealed that this enhancement is due to the simultaneous toughening mechanism of PESU rich particles (crack deviation, crack pinning, debonding), GNPs (crack deviation), and MWCNTs (pull out). This work also evidences that it is important to introduce similar size of tougheners for improving interlaminar toughness of multifunctional CFRP composites.
KW - Carbon fibres
KW - Carbon nanotubes
KW - Fracture toughness
KW - Graphene nanoplatelets
KW - Polymer-matrix composites (PMCs)
UR - https://www.scopus.com/pages/publications/85121134442
U2 - 10.1016/j.compstruct.2021.115073
DO - 10.1016/j.compstruct.2021.115073
M3 - Article
AN - SCOPUS:85121134442
SN - 0263-8223
VL - 282
JO - Composite Structures
JF - Composite Structures
M1 - 115073
ER -