Effect of weld on the mechanical properties of high strength and ultra-high strength steel tubes in fabricated hybrid sections

Fatemeh Javidan, Amin Heidarpour, Xiao-Ling Zhao, Christopher R. Hutchinson, Jussi Minkkinen

Research output: Contribution to journalArticleResearchpeer-review

Abstract

The effect of welding on the mechanical properties of high and ultra-high strength tubes in hybrid sections is a critical factor which influences the global performance of fabricated members and should be considered in the design and incorporation of these materials. To investigate and quantify these effects on the material of welded steel, a specific type of hybrid section composed of plates and tubes is considered in which two scales of experimental analysis are conducted at different positions from weld. In the macro scale, standard tensile tests are performed at various distances from weld to obtain the mechanical properties of heat affected steel in the axial direction parallel to the weld. Comparisons are made among three different welded materials: mild steel, high strength steel and ultra-high strength steel. The original and after-weld alteration in the ultimate tensile strength (UTS) and the strain corresponding to the UTS are investigated giving particular attention to the effect of yield strength and strain hardening rate. At the micro level, the microstructure of three above-mentioned materials in addition to microhardness profiles have been examined providing extensive data of the material behavior after welding. It is shown that the welding and post welding process, such as heat input and cooling rate affect the local material properties at different distances from weld leading to an overall heterogeneity in the material influencing the mechanical behavior.

Original languageEnglish
Pages (from-to)16-27
Number of pages12
JournalEngineering Structures
Volume118
DOIs
Publication statusPublished - 1 Jul 2016

Keywords

  • Fabricated hybrid section
  • Heat affected zone
  • Mechanical properties
  • Microstructure
  • Strain hardening rate
  • Ultra-high strength tube

Cite this

@article{ec2fb26a0dcc45e39af80f290c54647c,
title = "Effect of weld on the mechanical properties of high strength and ultra-high strength steel tubes in fabricated hybrid sections",
abstract = "The effect of welding on the mechanical properties of high and ultra-high strength tubes in hybrid sections is a critical factor which influences the global performance of fabricated members and should be considered in the design and incorporation of these materials. To investigate and quantify these effects on the material of welded steel, a specific type of hybrid section composed of plates and tubes is considered in which two scales of experimental analysis are conducted at different positions from weld. In the macro scale, standard tensile tests are performed at various distances from weld to obtain the mechanical properties of heat affected steel in the axial direction parallel to the weld. Comparisons are made among three different welded materials: mild steel, high strength steel and ultra-high strength steel. The original and after-weld alteration in the ultimate tensile strength (UTS) and the strain corresponding to the UTS are investigated giving particular attention to the effect of yield strength and strain hardening rate. At the micro level, the microstructure of three above-mentioned materials in addition to microhardness profiles have been examined providing extensive data of the material behavior after welding. It is shown that the welding and post welding process, such as heat input and cooling rate affect the local material properties at different distances from weld leading to an overall heterogeneity in the material influencing the mechanical behavior.",
keywords = "Fabricated hybrid section, Heat affected zone, Mechanical properties, Microstructure, Strain hardening rate, Ultra-high strength tube",
author = "Fatemeh Javidan and Amin Heidarpour and Xiao-Ling Zhao and Hutchinson, {Christopher R.} and Jussi Minkkinen",
year = "2016",
month = "7",
day = "1",
doi = "10.1016/j.engstruct.2016.03.046",
language = "English",
volume = "118",
pages = "16--27",
journal = "Engineering Structures",
issn = "0141-0296",
publisher = "Elsevier",

}

Effect of weld on the mechanical properties of high strength and ultra-high strength steel tubes in fabricated hybrid sections. / Javidan, Fatemeh; Heidarpour, Amin; Zhao, Xiao-Ling; Hutchinson, Christopher R.; Minkkinen, Jussi.

In: Engineering Structures, Vol. 118, 01.07.2016, p. 16-27.

Research output: Contribution to journalArticleResearchpeer-review

TY - JOUR

T1 - Effect of weld on the mechanical properties of high strength and ultra-high strength steel tubes in fabricated hybrid sections

AU - Javidan, Fatemeh

AU - Heidarpour, Amin

AU - Zhao, Xiao-Ling

AU - Hutchinson, Christopher R.

AU - Minkkinen, Jussi

PY - 2016/7/1

Y1 - 2016/7/1

N2 - The effect of welding on the mechanical properties of high and ultra-high strength tubes in hybrid sections is a critical factor which influences the global performance of fabricated members and should be considered in the design and incorporation of these materials. To investigate and quantify these effects on the material of welded steel, a specific type of hybrid section composed of plates and tubes is considered in which two scales of experimental analysis are conducted at different positions from weld. In the macro scale, standard tensile tests are performed at various distances from weld to obtain the mechanical properties of heat affected steel in the axial direction parallel to the weld. Comparisons are made among three different welded materials: mild steel, high strength steel and ultra-high strength steel. The original and after-weld alteration in the ultimate tensile strength (UTS) and the strain corresponding to the UTS are investigated giving particular attention to the effect of yield strength and strain hardening rate. At the micro level, the microstructure of three above-mentioned materials in addition to microhardness profiles have been examined providing extensive data of the material behavior after welding. It is shown that the welding and post welding process, such as heat input and cooling rate affect the local material properties at different distances from weld leading to an overall heterogeneity in the material influencing the mechanical behavior.

AB - The effect of welding on the mechanical properties of high and ultra-high strength tubes in hybrid sections is a critical factor which influences the global performance of fabricated members and should be considered in the design and incorporation of these materials. To investigate and quantify these effects on the material of welded steel, a specific type of hybrid section composed of plates and tubes is considered in which two scales of experimental analysis are conducted at different positions from weld. In the macro scale, standard tensile tests are performed at various distances from weld to obtain the mechanical properties of heat affected steel in the axial direction parallel to the weld. Comparisons are made among three different welded materials: mild steel, high strength steel and ultra-high strength steel. The original and after-weld alteration in the ultimate tensile strength (UTS) and the strain corresponding to the UTS are investigated giving particular attention to the effect of yield strength and strain hardening rate. At the micro level, the microstructure of three above-mentioned materials in addition to microhardness profiles have been examined providing extensive data of the material behavior after welding. It is shown that the welding and post welding process, such as heat input and cooling rate affect the local material properties at different distances from weld leading to an overall heterogeneity in the material influencing the mechanical behavior.

KW - Fabricated hybrid section

KW - Heat affected zone

KW - Mechanical properties

KW - Microstructure

KW - Strain hardening rate

KW - Ultra-high strength tube

UR - http://www.scopus.com/inward/record.url?scp=84961962757&partnerID=8YFLogxK

U2 - 10.1016/j.engstruct.2016.03.046

DO - 10.1016/j.engstruct.2016.03.046

M3 - Article

VL - 118

SP - 16

EP - 27

JO - Engineering Structures

JF - Engineering Structures

SN - 0141-0296

ER -