Effect of solidification grain refinement on the development of wrought Mg alloys

Mark A. Easton, Chris H.J. Davies, Matthew R. Barnett, Franka Pravdic

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

5 Citations (Scopus)

Abstract

A recent trial investigated the effect of solidification grain refinement of billet on the grain refinement and properties of alloy ZM20. It was found that even at levels of 0.4Mn, significant grain refinement could be obtained when 0.7Zr was added. At 0.2Mn grain sizes as low as 60μm were obtained. Billets of Mg-2Zn-0.2Mn with four different grain sizes, due to different Zr and cooling rates were then cast via vertical direct chill casting and extruded conventionally. Benefits of grain refinement of the billet on extrusion were found to be a slight increase in the size of the operating window, and a reduction of the grain size in the extrudate. However, the effect of the reduction in extrudate grain size due to refinement of the billet was small compared with the amount of grain refinement obtained due to recrystallisation on extrusion.

Original languageEnglish
Title of host publicationSupplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006
Pages1729-1734
Number of pages6
EditionPART 2
Publication statusPublished - 1 Dec 2007
Event5th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2006 - Vancouver, Canada
Duration: 4 Jul 20068 Jul 2006

Publication series

NameMaterials Science Forum
NumberPART 2
Volume539-543
ISSN (Print)0255-5476

Conference

Conference5th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2006
CountryCanada
CityVancouver
Period4/07/068/07/06

Keywords

  • Direct chill casting
  • Grain refinement
  • Wrought magnesium alloys

Cite this

Easton, M. A., Davies, C. H. J., Barnett, M. R., & Pravdic, F. (2007). Effect of solidification grain refinement on the development of wrought Mg alloys. In Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006 (PART 2 ed., pp. 1729-1734). (Materials Science Forum; Vol. 539-543, No. PART 2).
Easton, Mark A. ; Davies, Chris H.J. ; Barnett, Matthew R. ; Pravdic, Franka. / Effect of solidification grain refinement on the development of wrought Mg alloys. Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 2. ed. 2007. pp. 1729-1734 (Materials Science Forum; PART 2).
@inproceedings{5a31df500e124d379d1eb6ab65a7a785,
title = "Effect of solidification grain refinement on the development of wrought Mg alloys",
abstract = "A recent trial investigated the effect of solidification grain refinement of billet on the grain refinement and properties of alloy ZM20. It was found that even at levels of 0.4Mn, significant grain refinement could be obtained when 0.7Zr was added. At 0.2Mn grain sizes as low as 60μm were obtained. Billets of Mg-2Zn-0.2Mn with four different grain sizes, due to different Zr and cooling rates were then cast via vertical direct chill casting and extruded conventionally. Benefits of grain refinement of the billet on extrusion were found to be a slight increase in the size of the operating window, and a reduction of the grain size in the extrudate. However, the effect of the reduction in extrudate grain size due to refinement of the billet was small compared with the amount of grain refinement obtained due to recrystallisation on extrusion.",
keywords = "Direct chill casting, Grain refinement, Wrought magnesium alloys",
author = "Easton, {Mark A.} and Davies, {Chris H.J.} and Barnett, {Matthew R.} and Franka Pravdic",
year = "2007",
month = "12",
day = "1",
language = "English",
isbn = "0878494286",
series = "Materials Science Forum",
number = "PART 2",
pages = "1729--1734",
booktitle = "Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006",
edition = "PART 2",

}

Easton, MA, Davies, CHJ, Barnett, MR & Pravdic, F 2007, Effect of solidification grain refinement on the development of wrought Mg alloys. in Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 2 edn, Materials Science Forum, no. PART 2, vol. 539-543, pp. 1729-1734, 5th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2006, Vancouver, Canada, 4/07/06.

Effect of solidification grain refinement on the development of wrought Mg alloys. / Easton, Mark A.; Davies, Chris H.J.; Barnett, Matthew R.; Pravdic, Franka.

Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 2. ed. 2007. p. 1729-1734 (Materials Science Forum; Vol. 539-543, No. PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

TY - GEN

T1 - Effect of solidification grain refinement on the development of wrought Mg alloys

AU - Easton, Mark A.

AU - Davies, Chris H.J.

AU - Barnett, Matthew R.

AU - Pravdic, Franka

PY - 2007/12/1

Y1 - 2007/12/1

N2 - A recent trial investigated the effect of solidification grain refinement of billet on the grain refinement and properties of alloy ZM20. It was found that even at levels of 0.4Mn, significant grain refinement could be obtained when 0.7Zr was added. At 0.2Mn grain sizes as low as 60μm were obtained. Billets of Mg-2Zn-0.2Mn with four different grain sizes, due to different Zr and cooling rates were then cast via vertical direct chill casting and extruded conventionally. Benefits of grain refinement of the billet on extrusion were found to be a slight increase in the size of the operating window, and a reduction of the grain size in the extrudate. However, the effect of the reduction in extrudate grain size due to refinement of the billet was small compared with the amount of grain refinement obtained due to recrystallisation on extrusion.

AB - A recent trial investigated the effect of solidification grain refinement of billet on the grain refinement and properties of alloy ZM20. It was found that even at levels of 0.4Mn, significant grain refinement could be obtained when 0.7Zr was added. At 0.2Mn grain sizes as low as 60μm were obtained. Billets of Mg-2Zn-0.2Mn with four different grain sizes, due to different Zr and cooling rates were then cast via vertical direct chill casting and extruded conventionally. Benefits of grain refinement of the billet on extrusion were found to be a slight increase in the size of the operating window, and a reduction of the grain size in the extrudate. However, the effect of the reduction in extrudate grain size due to refinement of the billet was small compared with the amount of grain refinement obtained due to recrystallisation on extrusion.

KW - Direct chill casting

KW - Grain refinement

KW - Wrought magnesium alloys

UR - http://www.scopus.com/inward/record.url?scp=38349027127&partnerID=8YFLogxK

M3 - Conference Paper

SN - 0878494286

SN - 9780878494286

T3 - Materials Science Forum

SP - 1729

EP - 1734

BT - Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006

ER -

Easton MA, Davies CHJ, Barnett MR, Pravdic F. Effect of solidification grain refinement on the development of wrought Mg alloys. In Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 2 ed. 2007. p. 1729-1734. (Materials Science Forum; PART 2).