Effect of build orientation on fracture behaviour of AlSi10Mg produced by selective laser melting

Sultan AlRedha, Anton Shterenlikht, Mahmoud Mostafavi, Derreck Van Gelderen, Omar Eduardo Lopez-Botello, Luis Arturo Reyes, Patricia Zambrano, Carlos Garza

Research output: Contribution to journalArticleResearchpeer-review

17 Citations (Scopus)

Abstract

Purpose: A key challenge found in additive manufacturing is the difficulty to produce components with replicable microstructure and mechanical performance in distinct orientations. This study aims to investigate the influence of build orientation on the fracture toughness of additively manufactured AlSi10Mg specimens. Design/methodology/approach: The AlSi10Mg specimens were manufactured using the selective laser melting (SLM) technology. The fracture toughness was experimentally determined (under ASTM E399-09) using C(T) specimens manufactured in different orientations. The microstructure of the specimens was examined using metallography to determine the effects of grain orientation on fracture toughness. Findings: The fracture toughness magnitude of manufactured specimens ranged between 36 and 50 MPam, which closely matched conventional bulk material and literature values regarding AlSi10Mg components. The C(T) specimens printed in the T-L orientation yielded the highest fracture toughness. The grain orientation and fracture toughness values confirm the anisotropic nature of SLM parts where the T-L-oriented specimen obtained the highest KIC value. A clear interaction between the melt pool boundaries and micro-slipping during the loading application was observed. Originality/value: The novelty of this paper consists in elucidating the relationship between grain orientation and fracture toughness of additively manufactured AlSi10Mg specimens because of the anisotropy generated by the different melting pool boundaries and orientations in SLM. The findings show that melt pool boundaries can behave as easier pathways for cracks to propagate and subsequently reduce the fracture toughness of specimens with cracks perpendicular to the build direction.

Original languageEnglish
Pages (from-to)112-119
Number of pages8
JournalRapid Prototyping Journal
Volume27
Issue number1
DOIs
Publication statusPublished - 8 Jan 2021
Externally publishedYes

Keywords

  • Additive manufacturing
  • Build orientation
  • Fracture toughness
  • Powder bed fusion
  • Residual stress

Cite this