Design of a peripheral interface controller based MPPT charge controller

Md Rokonuzzaman; Md Hossam-E-Haider

doi:10.1109/ICECTE.2016.7879638

Design of a peripheral interface controller based MPPT charge controller

Md Rokonuzzaman, Md Hossam-E-Haider

Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Other

2 Citations (Scopus)

Abstract

This paper presents a smart charge controller (SCC) that can extract maximum power from solar panel and could make instant decision to protect the system. In the same time the designed controller can control high voltage disconnect (HVD)-reconnect, and low voltage disconnect (LVD)-reconnect. An improved maximum power point tracking (MPPT) is achieved through a Peripheral interface controller (PIC) based Perturb and Observe (P&O) algorithm. Additionally, light emitting diode (LED) used as indicator and a display is featured to show the system status. A blue-tooth device is used to work it as a data logger to monitor system status by smart phone or Laptop. Furthermore, this SCC is developed to increase the efficiency with low cost. Experimented highest efficiency 99% is recorded within the cost of BDT 2050 taka only.

Original language	English
Title of host publication	ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering
Publisher	IEEE, Institute of Electrical and Electronics Engineers
Pages	1-4
Number of pages	4
ISBN (Electronic)	9781509057856
DOIs	https://doi.org/10.1109/ICECTE.2016.7879638
Publication status	Published - 2016
Externally published	Yes
Event	International Conference on Electrical, Computer and Telecommunication Engineering 2016 - Rajshahi, Bangladesh Duration: 8 Dec 2016 → 10 Dec 2016 Conference number: 2nd https://ieeexplore.ieee.org/xpl/conhome/7871259/proceeding (Proceedings)

Conference

Conference	International Conference on Electrical, Computer and Telecommunication Engineering 2016
Abbreviated title	ICECTE 2016
Country/Territory	Bangladesh
City	Rajshahi
Period	8/12/16 → 10/12/16
Internet address	https://ieeexplore.ieee.org/xpl/conhome/7871259/proceeding (Proceedings)

Keywords

MPPT technique
P & O algorithm
PIC microcontroller
Smart charge controller (SCC)

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1109/ICECTE.2016.7879638

Cite this

@inproceedings{e6980783846e4f6bbec91ba141a8a975,

title = "Design of a peripheral interface controller based MPPT charge controller",

abstract = "This paper presents a smart charge controller (SCC) that can extract maximum power from solar panel and could make instant decision to protect the system. In the same time the designed controller can control high voltage disconnect (HVD)-reconnect, and low voltage disconnect (LVD)-reconnect. An improved maximum power point tracking (MPPT) is achieved through a Peripheral interface controller (PIC) based Perturb and Observe (P\&O) algorithm. Additionally, light emitting diode (LED) used as indicator and a display is featured to show the system status. A blue-tooth device is used to work it as a data logger to monitor system status by smart phone or Laptop. Furthermore, this SCC is developed to increase the efficiency with low cost. Experimented highest efficiency 99\% is recorded within the cost of BDT 2050 taka only.",

keywords = "MPPT technique, P \& O algorithm, PIC microcontroller, Smart charge controller (SCC)",

author = "Md Rokonuzzaman and Md Hossam-E-Haider",

note = "Publisher Copyright: {\textcopyright} 2016 IEEE.; International Conference on Electrical, Computer and Telecommunication Engineering 2016, ICECTE 2016 ; Conference date: 08-12-2016 Through 10-12-2016",

year = "2016",

doi = "10.1109/ICECTE.2016.7879638",

language = "English",

pages = "1--4",

booktitle = "ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering",

publisher = "IEEE, Institute of Electrical and Electronics Engineers",

address = "United States of America",

url = "https://ieeexplore.ieee.org/xpl/conhome/7871259/proceeding",

}

Rokonuzzaman, M & Hossam-E-Haider, M 2016, Design of a peripheral interface controller based MPPT charge controller. in ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering. IEEE, Institute of Electrical and Electronics Engineers, pp. 1-4, International Conference on Electrical, Computer and Telecommunication Engineering 2016, Rajshahi, Bangladesh, 8/12/16. https://doi.org/10.1109/ICECTE.2016.7879638

Design of a peripheral interface controller based MPPT charge controller. / Rokonuzzaman, Md; Hossam-E-Haider, Md.
ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering. IEEE, Institute of Electrical and Electronics Engineers, 2016. p. 1-4.

Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Other

TY - GEN

T1 - Design of a peripheral interface controller based MPPT charge controller

AU - Rokonuzzaman, Md

AU - Hossam-E-Haider, Md

N1 - Conference code: 2nd

PY - 2016

Y1 - 2016

N2 - This paper presents a smart charge controller (SCC) that can extract maximum power from solar panel and could make instant decision to protect the system. In the same time the designed controller can control high voltage disconnect (HVD)-reconnect, and low voltage disconnect (LVD)-reconnect. An improved maximum power point tracking (MPPT) is achieved through a Peripheral interface controller (PIC) based Perturb and Observe (P&O) algorithm. Additionally, light emitting diode (LED) used as indicator and a display is featured to show the system status. A blue-tooth device is used to work it as a data logger to monitor system status by smart phone or Laptop. Furthermore, this SCC is developed to increase the efficiency with low cost. Experimented highest efficiency 99% is recorded within the cost of BDT 2050 taka only.

AB - This paper presents a smart charge controller (SCC) that can extract maximum power from solar panel and could make instant decision to protect the system. In the same time the designed controller can control high voltage disconnect (HVD)-reconnect, and low voltage disconnect (LVD)-reconnect. An improved maximum power point tracking (MPPT) is achieved through a Peripheral interface controller (PIC) based Perturb and Observe (P&O) algorithm. Additionally, light emitting diode (LED) used as indicator and a display is featured to show the system status. A blue-tooth device is used to work it as a data logger to monitor system status by smart phone or Laptop. Furthermore, this SCC is developed to increase the efficiency with low cost. Experimented highest efficiency 99% is recorded within the cost of BDT 2050 taka only.

KW - MPPT technique

KW - P & O algorithm

KW - PIC microcontroller

KW - Smart charge controller (SCC)

UR - http://www.scopus.com/inward/record.url?scp=85017318510&partnerID=8YFLogxK

U2 - 10.1109/ICECTE.2016.7879638

DO - 10.1109/ICECTE.2016.7879638

M3 - Conference Paper

AN - SCOPUS:85017318510

SP - 1

EP - 4

BT - ICECTE 2016 - 2nd International Conference on Electrical, Computer and Telecommunication Engineering

PB - IEEE, Institute of Electrical and Electronics Engineers

T2 - International Conference on Electrical, Computer and Telecommunication Engineering 2016

Y2 - 8 December 2016 through 10 December 2016

ER -

Design of a peripheral interface controller based MPPT charge controller

Abstract

Conference

Keywords

UN SDGs

Access to Document

Other files and links

Cite this