Design and evaluation of an elliptical patch textile antenna for RFID application and bending consequences

Shahriar Hasan Shehab; Shahreen Hassan; Md Ashif Islam Oni; Shuvashis Dey; Md Munir Hassan

doi:10.1109/ICEEICT.2015.7307381

Design and evaluation of an elliptical patch textile antenna for RFID application and bending consequences

Shahriar Hasan Shehab, Shahreen Hassan, Md Ashif Islam Oni, Shuvashis Dey, Md Munir Hassan

Electrical and Computer Systems Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

4 Citations (Scopus)

Abstract

This paper presents a design of an elliptical patch textile antenna having operating frequency at 2.45 GHz for RFID application. The proposed antenna consists of elliptical patch on Dacron fabric (□_r=3) as substrate followed by a partial ground at the back of the substrate. The overall size of the proposed antenna is 45×38 mm². The proposed antenna has a gain of 3.386 dB with VSWR of 1.07. The performance of the proposed antenna is analyzed under four angles of bending. The effect of change in feed length is also focused. The characteristics, low profile and compact size of the antenna depicts as a potential candidate for RFID application. CST Microwave Studio package is used for design and simulation purpose.

Original language	English
Title of host publication	2015 International Conference on Electrical Engineering and Information Communication Technology (ICEEICT 2015)
Editors	Mohammad Shorif Uddin, Mohammed Hossam-e-Haider
Place of Publication	Piscataway NJ USA
Publisher	IEEE, Institute of Electrical and Electronics Engineers
Pages	215-218
Number of pages	4
ISBN (Electronic)	9781467366762, 9781467366755
ISBN (Print)	9781467366779
DOIs	https://doi.org/10.1109/ICEEICT.2015.7307381
Publication status	Published - 26 Oct 2015
Event	International Conference on Electrical Information and Communication Technology (EICT) 2015 - Savar, Dhaka, Bangladesh Duration: 21 May 2015 → 23 May 2015 Conference number: 2nd https://ieeexplore.ieee.org/xpl/conhome/7386241/proceeding (Proceedings)

Conference

Conference	International Conference on Electrical Information and Communication Technology (EICT) 2015
Abbreviated title	EICT 2015
Country/Territory	Bangladesh
City	Savar, Dhaka
Period	21/05/15 → 23/05/15
Internet address	https://ieeexplore.ieee.org/xpl/conhome/7386241/proceeding (Proceedings)

Keywords

Bending
Elliptical Patch
ISM Band
RFID
Textile Antenna

Access to Document

10.1109/ICEEICT.2015.7307381

Cite this

Shehab, S. H., Hassan, S., Oni, M. A. I., Dey, S., & Hassan, M. M. (2015). Design and evaluation of an elliptical patch textile antenna for RFID application and bending consequences. In M. S. Uddin, & M. Hossam-e-Haider (Eds.), 2015 International Conference on Electrical Engineering and Information Communication Technology (ICEEICT 2015) (pp. 215-218). IEEE, Institute of Electrical and Electronics Engineers. https://doi.org/10.1109/ICEEICT.2015.7307381

Shehab, Shahriar Hasan ; Hassan, Shahreen ; Oni, Md Ashif Islam et al. / Design and evaluation of an elliptical patch textile antenna for RFID application and bending consequences. 2015 International Conference on Electrical Engineering and Information Communication Technology (ICEEICT 2015). editor / Mohammad Shorif Uddin ; Mohammed Hossam-e-Haider. Piscataway NJ USA : IEEE, Institute of Electrical and Electronics Engineers, 2015. pp. 215-218

@inproceedings{53adf09d9a094c8696c5644e56530aab,

title = "Design and evaluation of an elliptical patch textile antenna for RFID application and bending consequences",

abstract = "This paper presents a design of an elliptical patch textile antenna having operating frequency at 2.45 GHz for RFID application. The proposed antenna consists of elliptical patch on Dacron fabric (□r=3) as substrate followed by a partial ground at the back of the substrate. The overall size of the proposed antenna is 45×38 mm2. The proposed antenna has a gain of 3.386 dB with VSWR of 1.07. The performance of the proposed antenna is analyzed under four angles of bending. The effect of change in feed length is also focused. The characteristics, low profile and compact size of the antenna depicts as a potential candidate for RFID application. CST Microwave Studio package is used for design and simulation purpose.",

keywords = "Bending, Elliptical Patch, ISM Band, RFID, Textile Antenna",

author = "Shehab, {Shahriar Hasan} and Shahreen Hassan and Oni, {Md Ashif Islam} and Shuvashis Dey and Hassan, {Md Munir}",

year = "2015",

month = oct,

day = "26",

doi = "10.1109/ICEEICT.2015.7307381",

language = "English",

isbn = "9781467366779",

pages = "215--218",

editor = "Uddin, {Mohammad Shorif} and Mohammed Hossam-e-Haider",

booktitle = "2015 International Conference on Electrical Engineering and Information Communication Technology (ICEEICT 2015)",

publisher = "IEEE, Institute of Electrical and Electronics Engineers",

address = "United States of America",

note = "International Conference on Electrical Information and Communication Technology (EICT) 2015, EICT 2015 ; Conference date: 21-05-2015 Through 23-05-2015",

url = "https://ieeexplore.ieee.org/xpl/conhome/7386241/proceeding",

}

Shehab, SH, Hassan, S, Oni, MAI, Dey, S & Hassan, MM 2015, Design and evaluation of an elliptical patch textile antenna for RFID application and bending consequences. in MS Uddin & M Hossam-e-Haider (eds), 2015 International Conference on Electrical Engineering and Information Communication Technology (ICEEICT 2015). IEEE, Institute of Electrical and Electronics Engineers, Piscataway NJ USA, pp. 215-218, International Conference on Electrical Information and Communication Technology (EICT) 2015, Savar, Dhaka, Bangladesh, 21/05/15. https://doi.org/10.1109/ICEEICT.2015.7307381

Design and evaluation of an elliptical patch textile antenna for RFID application and bending consequences. / Shehab, Shahriar Hasan; Hassan, Shahreen; Oni, Md Ashif Islam et al.
2015 International Conference on Electrical Engineering and Information Communication Technology (ICEEICT 2015). ed. / Mohammad Shorif Uddin; Mohammed Hossam-e-Haider. Piscataway NJ USA: IEEE, Institute of Electrical and Electronics Engineers, 2015. p. 215-218.

Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

TY - GEN

T1 - Design and evaluation of an elliptical patch textile antenna for RFID application and bending consequences

AU - Shehab, Shahriar Hasan

AU - Hassan, Shahreen

AU - Oni, Md Ashif Islam

AU - Dey, Shuvashis

AU - Hassan, Md Munir

N1 - Conference code: 2nd

PY - 2015/10/26

Y1 - 2015/10/26

N2 - This paper presents a design of an elliptical patch textile antenna having operating frequency at 2.45 GHz for RFID application. The proposed antenna consists of elliptical patch on Dacron fabric (□r=3) as substrate followed by a partial ground at the back of the substrate. The overall size of the proposed antenna is 45×38 mm2. The proposed antenna has a gain of 3.386 dB with VSWR of 1.07. The performance of the proposed antenna is analyzed under four angles of bending. The effect of change in feed length is also focused. The characteristics, low profile and compact size of the antenna depicts as a potential candidate for RFID application. CST Microwave Studio package is used for design and simulation purpose.

AB - This paper presents a design of an elliptical patch textile antenna having operating frequency at 2.45 GHz for RFID application. The proposed antenna consists of elliptical patch on Dacron fabric (□r=3) as substrate followed by a partial ground at the back of the substrate. The overall size of the proposed antenna is 45×38 mm2. The proposed antenna has a gain of 3.386 dB with VSWR of 1.07. The performance of the proposed antenna is analyzed under four angles of bending. The effect of change in feed length is also focused. The characteristics, low profile and compact size of the antenna depicts as a potential candidate for RFID application. CST Microwave Studio package is used for design and simulation purpose.

KW - Bending

KW - Elliptical Patch

KW - ISM Band

KW - RFID

KW - Textile Antenna

UR - http://www.scopus.com/inward/record.url?scp=84962198244&partnerID=8YFLogxK

U2 - 10.1109/ICEEICT.2015.7307381

DO - 10.1109/ICEEICT.2015.7307381

M3 - Conference Paper

AN - SCOPUS:84962198244

SN - 9781467366779

SP - 215

EP - 218

BT - 2015 International Conference on Electrical Engineering and Information Communication Technology (ICEEICT 2015)

A2 - Uddin, Mohammad Shorif

A2 - Hossam-e-Haider, Mohammed

PB - IEEE, Institute of Electrical and Electronics Engineers

CY - Piscataway NJ USA

T2 - International Conference on Electrical Information and Communication Technology (EICT) 2015

Y2 - 21 May 2015 through 23 May 2015

ER -

Shehab SH, Hassan S, Oni MAI, Dey S, Hassan MM. Design and evaluation of an elliptical patch textile antenna for RFID application and bending consequences. In Uddin MS, Hossam-e-Haider M, editors, 2015 International Conference on Electrical Engineering and Information Communication Technology (ICEEICT 2015). Piscataway NJ USA: IEEE, Institute of Electrical and Electronics Engineers. 2015. p. 215-218 doi: 10.1109/ICEEICT.2015.7307381

Design and evaluation of an elliptical patch textile antenna for RFID application and bending consequences

Abstract

Conference

Keywords

Access to Document

Other files and links

Cite this