An experimental study of the near-wake structure of a cylinder undergoing combined translational and rotational oscillatory motions

Mehdi Nazarinia, Mark C. Thompson, John Sheridan, David Lo Jacono

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Abstract

The experimental research reported here uses particle image velocimetry to extend the study of Nazarinia et al. [1], recording detailed vorticity fields in the near-wake of a circular cylinder undergoing combined translational and rotational oscillatory motions. The focus of the present study is to examine the effect of the ratio between the translational and rotational velocities of the cylinder on the synchronization of the near-wake structures. The frequencies are fixed close to that of the natural frequency of vortex shedding. The results are presented for a fixed amplitude of rotational oscillation of 1 radian and a range of ratios between the translational and rotational velocities (V R) = [0:25;0:5;1:0;1:5]. In particular, it was found that varying the VR value changed the near-wake structure. The results show that at lower values of VR = 0:25, for all of the phase differences examined, the vortices are shed in a single-row 2S mode aligned in the medial plane with a slight offset from the centerline and also synchronized with the combined oscillatory motion. As VR increases the vortex shedding mode changes from a 2S single-row to a 2S double-row structure and eventually back to the single-row (at VR = 0:5). Increasing VR further resulted in the appearance of unlocked-on regimes over the range of negative phase angles and a transition from 2S to P+S mode at the in-phase case There was transition back to the 2S with a further decrease of F. For a higher VR the range of desynchronization increased.

Original languageEnglish
Title of host publicationASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting Collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels, FEDSM2010
Pages131-137
Number of pages7
Volume3
EditionPARTS A AND B
DOIs
Publication statusPublished - 2010
EventASME Fluids Engineering Division Summer Meeting (FEDSM) 2010 - Montreal, Canada
Duration: 1 Aug 20105 Aug 2010
Conference number: 3rd
http://proceedings.asmedigitalcollection.asme.org/volume.aspx?volumeid=15675

Conference

ConferenceASME Fluids Engineering Division Summer Meeting (FEDSM) 2010
Abbreviated titleFEDSM 2010
CountryCanada
CityMontreal
Period1/08/105/08/10
OtherASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting, FEDSM 2010 Collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels
Internet address

Cite this