3D transient thermal modelling and experimental validation of the temperature distribution during laser heating of Ti6AI4V alloy

Jihong Yang; Shoujin Sun; Milan Brandt; Wenyi Yan

doi:10.4028/www.scientific.net/MSF.654-656.894

3D transient thermal modelling and experimental validation of the temperature distribution during laser heating of Ti6AI4V alloy

Jihong Yang, Shoujin Sun, Milan Brandt, Wenyi Yan

Mechanical & Aerospace Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

1 Citation (Scopus)

Abstract

A three 3D transient finite element model has been developed to predict the temperature distribution in Ti6Al4V alloy plate workpiece. It is found that the temperature profile is strongly dependent on the parameters of the laser beam and material properties. Also the thermal model results were compared with results produced by experimental work and these show close agreement.

Original language	English
Title of host publication	PRICM 7
Subtitle of host publication	Part 1
Editors	Jian-Feng Nie, Allan Norton
Place of Publication	Pfaffikon Switzerland
Publisher	Trans Tech Publications
Pages	894-897
Number of pages	4
ISBN (Electronic)	9783038133308
ISBN (Print)	9780878492558
DOIs	https://doi.org/10.4028/www.scientific.net/MSF.654-656.894
Publication status	Published - 2010
Event	Pacific Rim International Conference on Advanced Materials and Processing 2010 - Cairns Qld Australia, Cairns, Australia Duration: 2 Aug 2010 → 6 Aug 2010 Conference number: 7th

Publication series

Name	Materials Science Forum
Publisher	Trans Tech Publications
Volume	654-656
ISSN (Print)	0255-5476
ISSN (Electronic)	1662-9752

Conference

Conference	Pacific Rim International Conference on Advanced Materials and Processing 2010
Abbreviated title	PRICM-7
Country/Territory	Australia
City	Cairns
Period	2/08/10 → 6/08/10

Access to Document

10.4028/www.scientific.net/MSF.654-656.894

Cite this

@inproceedings{37bdc1dcf13440c08c448c303ef7b466,

title = "3D transient thermal modelling and experimental validation of the temperature distribution during laser heating of Ti6AI4V alloy",

abstract = "A three 3D transient finite element model has been developed to predict the temperature distribution in Ti6Al4V alloy plate workpiece. It is found that the temperature profile is strongly dependent on the parameters of the laser beam and material properties. Also the thermal model results were compared with results produced by experimental work and these show close agreement.",

author = "Jihong Yang and Shoujin Sun and Milan Brandt and Wenyi Yan",

year = "2010",

doi = "10.4028/www.scientific.net/MSF.654-656.894",

language = "English",

isbn = "9780878492558",

series = "Materials Science Forum",

publisher = "Trans Tech Publications",

pages = "894--897",

editor = "Jian-Feng Nie and Allan Norton",

booktitle = "PRICM 7",

address = "Switzerland",

note = "Pacific Rim International Conference on Advanced Materials and Processing 2010, PRICM-7 ; Conference date: 02-08-2010 Through 06-08-2010",

}

Yang, J, Sun, S, Brandt, M & Yan, W 2010, 3D transient thermal modelling and experimental validation of the temperature distribution during laser heating of Ti6AI4V alloy. in J-F Nie & A Norton (eds), PRICM 7: Part 1. Materials Science Forum, vol. 654-656, Trans Tech Publications, Pfaffikon Switzerland, pp. 894-897, Pacific Rim International Conference on Advanced Materials and Processing 2010, Cairns, Queensland, Australia, 2/08/10. https://doi.org/10.4028/www.scientific.net/MSF.654-656.894

3D transient thermal modelling and experimental validation of the temperature distribution during laser heating of Ti6AI4V alloy. / Yang, Jihong; Sun, Shoujin; Brandt, Milan et al.
PRICM 7: Part 1. ed. / Jian-Feng Nie; Allan Norton. Pfaffikon Switzerland: Trans Tech Publications, 2010. p. 894-897 (Materials Science Forum; Vol. 654-656).

Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

TY - GEN

T1 - 3D transient thermal modelling and experimental validation of the temperature distribution during laser heating of Ti6AI4V alloy

AU - Yang, Jihong

AU - Sun, Shoujin

AU - Brandt, Milan

AU - Yan, Wenyi

N1 - Conference code: 7th

PY - 2010

Y1 - 2010

N2 - A three 3D transient finite element model has been developed to predict the temperature distribution in Ti6Al4V alloy plate workpiece. It is found that the temperature profile is strongly dependent on the parameters of the laser beam and material properties. Also the thermal model results were compared with results produced by experimental work and these show close agreement.

AB - A three 3D transient finite element model has been developed to predict the temperature distribution in Ti6Al4V alloy plate workpiece. It is found that the temperature profile is strongly dependent on the parameters of the laser beam and material properties. Also the thermal model results were compared with results produced by experimental work and these show close agreement.

U2 - 10.4028/www.scientific.net/MSF.654-656.894

DO - 10.4028/www.scientific.net/MSF.654-656.894

M3 - Conference Paper

SN - 9780878492558

T3 - Materials Science Forum

SP - 894

EP - 897

BT - PRICM 7

A2 - Nie, Jian-Feng

A2 - Norton, Allan

PB - Trans Tech Publications

CY - Pfaffikon Switzerland

T2 - Pacific Rim International Conference on Advanced Materials and Processing 2010

Y2 - 2 August 2010 through 6 August 2010

ER -