Yuman Zhu

Research output

Research output per year 2005 2022 2023

• 79 Article
• 3 Conference Paper
• 2 Review Article
• 1 Abstract
• 1 More
  • 1 Comment / Debate

Research output per year

Research output per year

Search results

• 2023

  Fatigue behaviour of L-DED processed Ti-6Al-4V with microstructures refined by trace boron addition

  Zhang, K., Liu, Y., Tian, X., Yang, Y., Zhu, Y., Bermingham, M. & Huang, A., Mar 2023, In: International Journal of Fatigue. 168, 13 p., 107454.

  Research output: Contribution to journal › Article › Research › peer-review
  3 Citations (Scopus)

• Investigation of fatigue behavior of laser powder bed fusion Ti-6Al-4V: Roles of heat treatment and microstructure

  Liu, J., Zhang, K., Liu, J., Wang, H., Yang, Y., Yan, L., Tian, X., Zhu, Y. & Huang, A., Nov 2023, In: International Journal of Fatigue. 176, 13 p., 107839.

  Research output: Contribution to journal › Article › Research › peer-review

• On the microstructure and tensile property of core-shell structured nickel-based superalloy part produced by laser powder bed fusion and hot isostatic pressing

  Jiang, D., Tian, Y., Zhu, Y., Huang, S. & Huang, A., 12 Apr 2023, In: Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 870, 11 p., 144833.

  Research output: Contribution to journal › Article › Research › peer-review

• Rapid hardening response of ultra-hard Ti-6Al-2Sn-4Zr-6Mo alloy produced by laser powder bed fusion

  Peng, H., Wu, S., Kan, W. H., Lim, S. C. V., Zhu, Y. & Huang, A., 15 Mar 2023, In: Scripta Materialia. 226, 6 p., 115209.

  Research output: Contribution to journal › Article › Research › peer-review
  3 Citations (Scopus)

• Revealing the interrelation between process parameters and microstructure to promote the mechanical performance for Hastelloy-X

  Liu, M., Zeng, Q., Zhang, K., Zhang, H., Zheng, W., Li, Y., Hou, J., Wang, J., Zhu, Y. & Huang, A., Apr 2023, In: Vacuum. 210, 9 p., 111851.

  Research output: Contribution to journal › Article › Research › peer-review

• Rolling-assisted direct energy deposited Inconel 718: microstructural evolution and mechanical properties after optimized heat treatment

  Li, C., Hodgson, P., Preuss, M., Chen, Y., Wu, X., Zhu, Y., Tian, Y. & Huang, A., 1 May 2023, In: Journal of Materials Science and Technology. 144, p. 118-127 10 p.

  Research output: Contribution to journal › Article › Research › peer-review
  6 Citations (Scopus)

• Room and elevated temperature tensile and fatigue behaviour of additively manufactured Hastelloy X

  Shaji Karapuzha, A., Fraser, D., Schliephake, D., Dietrich, S., Zhu, Y., Wu, X. & Huang, A., 24 Aug 2023, In: Materials Science and Engineering: A. 882, 19 p., 145479.

  Research output: Contribution to journal › Article › Research › peer-review

• The effect of carbides on the creep performance of Hastelloy X fabricated by laser powder bed fusion

  Wu, S., Dai, S. B., Heilmaier, M., Peng, H. Z., Zhang, G. H., Huang, S., Zhang, X. J., Tian, Y., Zhu, Y. M. & Huang, A. J., 6 Jun 2023, In: Materials Science and Engineering: A. 875, 9 p., 145116.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• The latest development of Sc-strengthened aluminum alloys by laser powder bed fusion

  Bayoumy, D., Kan, W., Wu, X., Zhu, Y. & Huang, A., 20 Jun 2023, In: Journal of Materials Science and Technology. 149, p. 1-17 17 p.

  Research output: Contribution to journal › Review Article › Research › peer-review
  4 Citations (Scopus)

• The mechanisms behind the tribological behavior of titanium alloys processed by laser powder bed fusion sliding against steel

  Kan, W. H., Peng, H., Lim, S., Zhu, Y., Zhang, K. & Huang, A., Feb 2023, In: Tribology International. 180, 12 p., 108279.

  Research output: Contribution to journal › Article › Research › peer-review
  1 Citation (Scopus)
• 2022

  Achieving ultra-high strength rapidly in Ti-3Al-8V-6Cr-4Mo-4Zr alloy processed by directed energy deposition

  Zhang, K., Kan, W. H., Zhu, Y., Lim, S. C. V., Gao, X., Sit, C. K., Bai, C. & Huang, A., Dec 2022, In: Materials & Design. 224, 12 p., 111325.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
  1 Citation (Scopus)

• Achieving uniform plasticity in a high strength Al-Mn-Sc based alloy through laser-directed energy deposition

  Xiao, X., Guo, Y., Zhang, R., Bayoumy, D., Shen, H., Li, J., Gan, K., Zhang, K., Zhu, Y. & Huang, A., Dec 2022, In: Additive Manufacturing. 60, Part A, 12 p., 103273.

  Research output: Contribution to journal › Article › Research › peer-review
  3 Citations (Scopus)

• A critical review on the effects of process-induced porosity on the mechanical properties of alloys fabricated by laser powder bed fusion

  Kan, W. H., Chiu, L., Lim, C. V. S., Zhu, Y., Tian, Y., Jiang, D. & Huang, A., Jun 2022, In: Journal of Materials Science. 57, p. 9818–9865 48 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
  36 Citations (Scopus)

• A microstructure-based creep model for additively manufactured nickel-based superalloys

  Wu, S., Song, H. Y., Peng, H. Z., Hodgson, P. D., Wang, H., Wu, X. H., Zhu, Y. M., Lam, M. C. & Huang, A. J., 1 Feb 2022, In: Acta Materialia. 224, 13 p., 117528.

  Research output: Contribution to journal › Article › Research › peer-review
  20 Citations (Scopus)

• Corrosion resistant and high-strength dual-phase Mg-Li-Al-Zn alloy by friction stir processing

  Zeng, Z., Zhou, M., Esmaily, M., Zhu, Y., Choudhary, S., Griffith, J. C., Ma, J., Hora, Y., Chen, Y., Gullino, A., Shi, Q., Fujii, H. & Birbilis, N., 6 Apr 2022, In: Communications Materials. 3, 1, 10 p., 18.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
  18 Citations (Scopus)

• Discovering the role of the defect morphology and microstructure on the deformation behavior of additive manufactured Ti–6Al–4V

  Liu, J., Zhang, K., Liu, J., Zhang, R., Zeng, Z., Zhu, Y. & Huang, A., 24 Nov 2022, In: Materials Science and Engineering A. 859, 17 p., 144202.

  Research output: Contribution to journal › Article › Research › peer-review
  1 Citation (Scopus)

• Effect of in-situ layer-by-layer rolling on the microstructure, mechanical properties, and corrosion resistance of a directed energy deposited 316L stainless steel

  Kan, W. H., Jiang, D., Gao, X., Bhatia, V. K., Proust, G., Zhu, Y., Hodgson, P. & Huang, A., Jul 2022, In: Additive Manufacturing. 55, 18 p., 102863.

  Research output: Contribution to journal › Article › Research › peer-review
  7 Citations (Scopus)

• Effect of solution heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Hastelloy X manufactured by electron beam powder bed fusion

  Shaji Karapuzha, A., Fraser, D., Zhu, Y., Wu, X. & Huang, A., 30 Jan 2022, In: Journal of Materials Science and Technology. 98, p. 99-117 19 p.

  Research output: Contribution to journal › Article › Research › peer-review
  19 Citations (Scopus)

• Effects of the morphology of grain boundary α-phase on the anisotropic deformation behaviors of additive manufactured Ti–6Al–4V

  Liu, J., Zhang, K., Gao, X., Wang, H., Wu, S., Yang, Y., Zhu, Y. & Huang, A., Nov 2022, In: Materials and Design. 223, 13 p., 111150.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
  9 Citations (Scopus)

• Enhancing high-temperature strength and ductility in laser powder bed fusion Ti–6.5Al–2Zr–1Mo–1V alloy via heat treatment optimization

  Liu, J., Li, Y., Zhu, Y., Yang, Y., Zhang, R., Zhang, Z., Huang, A. & Zhang, K., 24 Nov 2022, In: Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 859, 10 p., 144201.

  Research output: Contribution to journal › Article › Research › peer-review
  3 Citations (Scopus)

• Fatigue crack growth in additively manufactured Hastelloy X - Influences of crack orientation and post-fabrication treatments

  Shaji Karapuzha, A., Wegener, T., Krochmal, M., Zhu, Y., Niendorf, T., Fraser, D., Wu, X. & Huang, A., 27 Sept 2022, In: Materials Science and Engineering A. 854, 14 p., 143773.

  Research output: Contribution to journal › Article › Research › peer-review
  5 Citations (Scopus)

• Grain boundary α-phase precipitation and coarsening: Comparing laser powder bed fusion with as-cast Ti-6Al-4V

  Liu, J., Zhang, K., Yang, Y., Wang, H., Zhu, Y. & Huang, A., 15 Jan 2022, In: Scripta Materialia. 207, 6 p., 114261.

  Research output: Contribution to journal › Article › Research › peer-review
  32 Citations (Scopus)

• Improving creep property of additively manufactured Inconel 718 through specifically-designed post heat treatments

  Wu, S., Peng, H. Z., Gao, X., Hodgson, P. D., Song, H. Y., Zhu, Y. M., Tian, Y. & Huang, A. J., 1 Nov 2022, In: Materials Science and Engineering A. 857, 11 p., 144047.

  Research output: Contribution to journal › Article › Research › peer-review
  4 Citations (Scopus)

• In-situ duplex structure formation and high tensile strength of super duplex stainless steel produced by directed laser deposition

  Jiang, D., Gao, X., Zhu, Y., Hutchinson, C. & Huang, A., 26 Jan 2022, In: Materials Science and Engineering A. 833, 12 p., 142557.

  Research output: Contribution to journal › Article › Research › peer-review
  17 Citations (Scopus)

• In-situ investigation into the deformation behavior of Ti-6Al-4V processed by laser powder bed fusion

  Liu, J., Zhang, K., Liu, J., Xu, Y., Zhang, R., Zeng, Z., Zhu, Y. & Huang, A., Dec 2022, In: Materials Characterization. 194, 11 p., 112434.

  Research output: Contribution to journal › Article › Research › peer-review

• Investigation of surface roughness post-processing of additively manufactured nickel-based superalloy Hastelloy X using electropolishing

  Jiang, D., Tian, Y., Zhu, Y. & Huang, A., 15 Jul 2022, In: Surface and Coatings Technology. 441, 15 p., 128529.

  Research output: Contribution to journal › Article › Research › peer-review
  12 Citations (Scopus)

• On the complex intermetallics in an Al-Mn-Sc based alloy produced by laser powder bed fusion

  Bayoumy, D., Boll, T., Schliephake, D., Wu, X., Zhu, Y. & Huang, A., 25 Apr 2022, In: Journal of Alloys and Compounds. 901, 10 p., 163571.

  Research output: Contribution to journal › Article › Research › peer-review
  5 Citations (Scopus)

• Origin of non-uniform plasticity in a high-strength Al-Mn-Sc based alloy produced by laser powder bed fusion

  Bayoumy, D., Kwak, K., Boll, T., Dietrich, S., Schliephake, D., Huang, J., Yi, J., Takashima, K., Wu, X., Zhu, Y. & Huang, A., 20 Mar 2022, In: Journal of Materials Science and Technology. 103, p. 121-133 13 p.

  Research output: Contribution to journal › Article › Research › peer-review
  16 Citations (Scopus)

• Review of high-strength aluminium alloys for additive manufacturing by laser powder bed fusion

  Rometsch, P. A., Zhu, Y., Wu, X. & Huang, A., Jul 2022, In: Materials and Design. 219, 17 p., 110779.

  Research output: Contribution to journal › Review Article › Research › peer-review

  Open Access
  55 Citations (Scopus)

• Scanning strategy induced cracking and anisotropic weakening in grain texture of additively manufactured superalloys

  Lam, M. C., Lim, S. C. V., Song, H., Zhu, Y., Wu, X. & Huang, A., Apr 2022, In: Additive Manufacturing. 52, 19 p., 102660.

  Research output: Contribution to journal › Article › Research › peer-review
  17 Citations (Scopus)

• Towards creep property improvement of selective laser melted Ni-based superalloy IN738LC

  Song, H. Y., Lam, M. C., Chen, Y., Wu, S., Hodgson, P. D., Wu, X. H., Zhu, Y. M. & Huang, A. J., 10 Jun 2022, In: Journal of Materials Science and Technology. 112, p. 301-314 14 p.

  Research output: Contribution to journal › Article › Research › peer-review
  6 Citations (Scopus)

• Ultrastrong nanotwinned titanium alloys through additive manufacturing

  Zhu, Y., Zhang, K., Meng, Z., Zhang, K., Hodgson, P., Birbilis, N., Weyland, M., Fraser, H. L., Lim, S. C. V., Peng, H., Yang, R., Wang, H. & Huang, A., 15 Sept 2022, In: Nature Materials. 21, p. 1258–1262 7 p.

  Research output: Contribution to journal › Article › Research › peer-review
  30 Citations (Scopus)
• 2021

  Effect of deformation reduction on microstructure, texture, and mechanical properties of forged Ti-6Al-4V

  Zhang, K., Zhang, K., Zhu, Y., Wu, X., Williams, J., Liang, E., Ma, J., Zhang, R., Lim, C. V. S. & Huang, A., 5 Jan 2021, In: Journal of Materials Engineering and Performance. 30, p. 1147–1156 10 p.

  Research output: Contribution to journal › Article › Research › peer-review
  6 Citations (Scopus)

• Effects of post heat treatments on microstructures and mechanical properties of selective laser melted Ti6AL4V alloy

  Liu, J., Liu, J., Li, Y., Zhang, R., Zeng, Z., Zhu, Y., Zhang, K. & Huang, A., 7 Oct 2021, In: Metals. 11, 10, 18 p., 1593.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
  8 Citations (Scopus)

• Hierarchical layered and refined grain structure of Inconel 718 superalloy produced by rolling-assisted directed energy deposition

  Li, C., Tian, Y., Chen, Y., Hodgson, P., Wu, X., Zhu, Y. & Huang, A., Dec 2021, In: Additive Manufacturing Letters. 1, 7 p., 100009.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
  11 Citations (Scopus)

• Intensive processing optimization for achieving strong and ductile Al-Mn-Mg-Sc-Zr alloy produced by selective laser melting

  Bayoumy, D., Schliephake, D., Dietrich, S., Wu, X. H., Zhu, Y. M. & Huang, A. J., 15 Jan 2021, In: Materials & Design. 198, 15 p., 109317.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

  File
  62 Citations (Scopus)

• Isotropic and improved tensile properties of Ti-6Al-4V achieved by in-situ rolling in direct energy deposition

  Tian, X., Zhu, Y., Lim, C. V. S., Williams, J., Boyer, R., Wu, X., Zhang, K. & Huang, A., Oct 2021, In: Additive Manufacturing. 46, 12 p., 102151.

  Research output: Contribution to journal › Article › Research › peer-review
  26 Citations (Scopus)

• Microstructure, mechanical behaviour and strengthening mechanisms in Hastelloy X manufactured by electron beam and laser beam powder bed fusion

  Shaji Karapuzha, A., Fraser, D., Schliephake, D., Dietrich, S., Zhu, Y., Wu, X. & Huang, A., 5 May 2021, In: Journal of Alloys and Compounds. 862, 19 p., 158034.

  Research output: Contribution to journal › Article › Research › peer-review
  23 Citations (Scopus)

• Microstructure control by heat treatment for better ductility and toughness of Ti-6Al-4V produced by laser powder bed fusion

  Zhang, K., Kan, W. H., Liu, Y., Gao, X., Zhu, Y., Lim, S. C. V., Peng, H. & Huang, A., 16 Nov 2021, In: Australian Journal of Mechanical Engineering. 19, 5, p. 680-691 12 p.

  Research output: Contribution to journal › Article › Research › peer-review
  7 Citations (Scopus)

• Production strategy for manufacturing large-scale AlSi10Mg components by laser powder bed fusion

  Bosio, F., Shen, H., Liu, Y., Lombardi, M., Rometsch, P., Wu, X., Zhu, Y. & Huang, A., 4 Jan 2021, In: JOM. 73, 3, p. 770–780 11 p.

  Research output: Contribution to journal › Article › Research › peer-review
  12 Citations (Scopus)
• 2020

  Atomic-scale investigation of the borides precipitated in a transient liquid phase-bonded Ni-based superalloy

  Hu, X. B., Sheng, N. C., Zhu, Y. M., Nie, J. F., Liu, J. D., Sun, X. F. & Ma, X. L., 1 Apr 2020, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51, 4, p. 1689-1698 10 p.

  Research output: Contribution to journal › Article › Research › peer-review
  11 Citations (Scopus)

• Dynamic precipitation behavior and mechanical properties of hot-extruded Mg₈₉Y₄Zn₂Li₅ alloys with different extrusion ratio and speed

  Liu, W., Zeng, Z., Hou, H., Zhang, J. & Zhu, Y., 4 Nov 2020, In: Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 798, 13 p., 140121.

  Research output: Contribution to journal › Article › Research › peer-review
  17 Citations (Scopus)

• Helium bubble nucleation in Laser Powder Bed Fusion processed 304L stainless steel

  Hou, J., Dai, B., Li, Y., Zhao, J., Chen, Z., Pan, D., Zhu, Y., Zhang, K. & Huang, A., 15 Dec 2020, In: Journal of Nuclear Materials. 542, 10 p., 152443.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

  File
  15 Citations (Scopus)

• Incoherent tilt grain boundaries stabilized by stacking faults and solute-cluster segregation: a case-study of an Mg-Gd alloy

  Liu, Z., Qian, Q., Jiang, Y., Wang, Y., Zhu, Y. & Nie, J. F., 2020, In: Materials Research Letters. 8, 7, p. 268-274 7 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

  File
  10 Citations (Scopus)

• The β₁ triad-related configurations in a Mg-RE alloy

  Zhu, Y. M., Zhang, H., Xu, S. W. & Nie, J. F., Apr 2020, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51A, p. 1887-1896 10 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

  File
  3 Citations (Scopus)

• Training high-strength aluminum alloys to withstand fatigue

  Zhang, Q., Zhu, Y., Gao, X., Wu, Y. & Hutchinson, C., 1 Dec 2020, In: Nature Communications. 11, 1, 8 p., 5198.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

  File
  52 Citations (Scopus)
• 2019

  A first-principles study of β'_F phase in magnesium-rare earth binary systems

  Liu, Y. X., Liu, H., Zhu, Y. M., Wilson, N. C. & Nie, J. F., 1 Dec 2019, In: Computational Materials Science. 170, 14 p., 109126.

  Research output: Contribution to journal › Article › Research › peer-review
  7 Citations (Scopus)

• Effects of calcium on strength and microstructural evolution of extruded alloys based on Mg-3Al-1Zn-0.3Mn

  Zeng, Z. R., Zhu, Y. M., Nie, J. F., Xu, S. W., Davies, C. H. J. & Birbilis, N., Sept 2019, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50A, 9, p. 4344–4363 20 p.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

  File
  45 Citations (Scopus)

• Isometric tilt grain boundaries and solute segregation in a deformed Mg–Zn–Ca alloy

  Zhu, Y. M. & Nie, J. F., 1 Jan 2019, Magnesium Technology, 2019. Neelameggham, N. R., Jordon, J. B., Orlov, D. & Joshi, V. V. (eds.). Springer, p. 263-266 4 p. (Minerals, Metals and Materials Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Other
  1 Citation (Scopus)

• Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity

  Sun, W., Zhu, Y., Marceau, R., Wang, L., Zhang, Q., Gao, X. & Hutchinson, C., 1 Mar 2019, In: Science. 363, 6430, p. 972-975 4 p.

  Research output: Contribution to journal › Article › Research › peer-review
  269 Citations (Scopus)