If you made any changes in Pure these will be visible here soon.

Research Output 1996 2019

Filter
Article
2013

A vision-based methodology to dynamically track and describe cell deformation during cell micromanipulation

Karimirad, F., Shirinzadeh, B., Yan, W. & Fatikow, S., 2013, In : International Journal of Optomechatronics. 7, 1, p. 33 - 45 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access

Elastic modulus of rat whiskers - A key biomaterial in the rat whisker sensory system

Kan, Q., Rajan, R., Fu, J., Kang, G. & Yan, W., 2013, In : Materials Research Bulletin. 48, 12, p. 5026 - 5032 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Evaluation of microstructure and mechanical properties at the interface region of laser-clad stellite 6 on steel using nanoindentation

Hutasoit, N., Yan, W., Cottam, R., Brandt, M. & Blicblau, A., 2013, In : Metallography, Microstructure, and Analysis. 2, 5, p. 328 - 336 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Fracture mechanics of stainless steel foams

Kashef, S., Asgari, A., Hilditch, T., Yan, W., Goel, V., Quadbeck, P. & Hodgson, P. D., 2013, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 578, p. 115 - 124 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Oliver-Pharr indentation method in determining elastic moduli of shape memory alloys-A phase transformable material

Kan, Q., Yan, W., Kang, G. & Sun, Q., 2013, In : Journal of the Mechanics and Physics of Solids. 61, 10, p. 2015 - 2033 19 p.

Research output: Contribution to journalArticleResearchpeer-review

On anomalous depth-dependency of the hardness of NiTi shape memory alloys in spherical nanoindentation

Yan, W., Amini, A. & Sun, Q., 2013, In : Journal of Materials Research. 28, 15, p. 2031 - 2039 9 p.

Research output: Contribution to journalArticleResearchpeer-review

2012

Carbon fibre pullout under the influence of residual thermal stresses in polymer matrix composites

Jia, Y. Y., Yan, W. & Liu, H-Y., 2012, In : Computational Materials Science. 62, p. 79 - 86 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Conditions of applying Oliver-Pharr method to the nanoindentation of particles in composites

Yan, W., Pun, C. L. J. & Simon, G. P., 2012, In : Composites Science and Technology. 72, 10, p. 1147 - 1152 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Cyclic deformation behavior and low-cycle fatigue failure behavior of TA16 titanium alloy

Kan, Q., Kang, G. & Yan, W., 2012, In : Advanced Science Letters. 15, p. 465 - 468 4 p.

Research output: Contribution to journalArticleResearchpeer-review

Wear at the die radius in sheet metal stamping

Pereira, M. P., Yan, W. & Rolfe, B. F., 2012, In : Wear. 274, p. 355 - 367 13 p.

Research output: Contribution to journalArticleResearchpeer-review

2011

A modified human head model for the study of impact head injury

Yan, W. & Pangestu, O. D., 2011, In : Computer methods in biomechanics and biomedical engineering. 14, 2, p. 1049 - 1057 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Depth dependency of indentation hardness during solid-state phase transition of shape memory alloys

Amini, A., Yan, W. & Sun, Q., 2011, In : Applied Physics Letters. 99, 2, p. 1 - 3 3 p.

Research output: Contribution to journalArticleResearchpeer-review

Fatigue crack growth behavior of titanium foams for medical applications

Kashef, S., Asgari, A., Hilditch, T., Yan, W., Goel, V. & Hodgson, P., 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 528, 3, p. 1602 - 1607 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Material property influences on the modelling of child brain injuries

Yan, W. & Fittock, R., 2011, In : Australian Journal of Mechanical Engineering. 8, 2, p. 159-168 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Numerical investigation of the effect of porous titanium femoral prosthesis on bone remodeling

Yan, W., Berthe, J. & Wen, C., 2011, In : Materials & Design. 32, 4, p. 1776 - 1782 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Some issues on nanoindentation method to measure the elastic modulus of particles in composites

Yan, W., Pun, C., Wu, Z. & Simon, G., 2011, In : Composites Part B: Engineering. 42, 8, p. 2093 - 2097 5 p.

Research output: Contribution to journalArticleResearchpeer-review

Spherical indentation method to measure the mechanical properties of metallic foams

Yan, W. & Pun, C., 2011, In : Materials Research Innovations. 15, Suppl 1, p. S41 - S44 4 p.

Research output: Contribution to journalArticleResearchpeer-review

Ultraflexible plasmonic nanocomposite aerogel

Chen, Y., Ng, K. C., Yan, W., Tang, Y. & Cheng, W., 2011, In : RSC Advances. 1, 7, p. 1265 - 1270 6 p.

Research output: Contribution to journalArticleResearchpeer-review

2010

Deformation and frictional heating in relation to wear in sheet metal stamping

Pereira, M., Okonkwo, P., Yan, W. & Rolfe, B., 2010, In : Steel Research International. 81, 9, p. 713 - 716 4 p.

Research output: Contribution to journalArticleResearchpeer-review

Effects of pores on shear bands in metallic glasses: A molecular dynamics study

Wang, J., Hodgson, P., Zhang, J., Yan, W. & Yang, C., 2010, In : Computational Materials Science. 50, 1, p. 211 - 217 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Experimental investigation and 3D finite element prediction of the heat affected zone during laser assisted machining of Ti6Al4V alloy

Yang, J., Sun, S., Brandt, M. & Yan, W., 2010, In : Journal of Materials Processing Technology. 210, 15, p. 2215 - 2222 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Fracture toughness of titanium foams for medical applications

Kashef, S., Asgari, S., Hilditch, T., Yan, W., Goel, V. & Hodgson, P., 2010, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 527, 29-30, p. 7689 - 7693 5 p.

Research output: Contribution to journalArticleResearchpeer-review

Scaling relationships in sharp conical indentation of shape memory alloys

Kang, G. & Yan, W., 2010, In : Philosophical Magazine. 90, 5, p. 599 - 616 18 p.

Research output: Contribution to journalArticleResearchpeer-review

Sliding distance, contact pressure and wear in sheet metal stamping

Pereira, M. P., Yan, W. & Rolfe, B. F., 2010, In : Wear. 268, 11-12, p. 1275 - 1284 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Spherical indentation of metallic foams

Yan, W. & Pun, C. L. J., 2010, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 527, 13-14, p. 3166 - 3175 10 p.

Research output: Contribution to journalArticleResearchpeer-review

2009

Contact pressure evolution at the die radius in sheet metal stamping

Pereira, M. P., Duncan, J. L., Yan, W. & Rolfe, B. F., 2009, In : Journal of Materials Processing Technology. 209, p. 3532 - 3541 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Dynamic Responses of Irregular Fibers Under Axial Tension

Yan, W., Li, Z., Wang, X. & Wang, L., 2009, In : Journal of Applied Polymer Science. 113, p. 2561 - 2568 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Effects of phase transition on the hardness of shape memory alloys

Kang, G. & Yan, W., 2009, In : Applied Physics Letters. 94, 26, p. 291906-1 - 291606-3 3 p.

Research output: Contribution to journalArticleResearchpeer-review

Effects of quenching rate on amorphous structures of Cu46Zr54 metallic glass

Wang, J., Hodgson, P. D., Zhang, J., Yan, W. & Yang, C., 2009, In : Journal of Materials Processing Technology. 209, 9, p. 4601 - 4606 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Investigation of a hydraulic impact: a technology in rock breaking

Genet, M., Yan, W. & Tran-Cong, T., 2009, In : Archive of Applied Mechanics. 79, p. 825 - 841 17 p.

Research output: Contribution to journalArticleResearchpeer-review

2008

Contact pressure evolution and its relation to wear in sheet metal forming

Pereira, M. P., Yan, W. & Rolfe, B. F., 2008, In : Wear. 265, 11-12, p. 1687 - 1699 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Determination of plastic yield stress from spherical indentation slope curve

Yan, W., Sun, Q. & Hodgson, P. D., 2008, In : Materials Letters. 62, p. 2260 - 2262 3 p.

Research output: Contribution to journalArticleResearchpeer-review

Effect of Transformation Volume STRAIN on the Spherical Indentation of Shape Memory Alloys

Yan, W., Sun, Q. & Liu, H-Y., 2008, In : International Journal of Modern Physics B. 22, 31-32, p. 5957 - 5964 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Mechanical Properties of Titanium Foam for Biomedical Applications

Kashef, S., Jianguo, L., Hodgson, P. D. & Yan, W., 2008, In : International Journal of Modern Physics B. 22, 31-32, p. 6155 - 6160 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Plastic deformation in Zr41Ti14Cu12.5Ni10Be22.5 bulk metal glass under Vickers indenter

Xie, H. M., Jianguo, L., Li, Y., Yan, W., Hodgson, P. D. & Wen, C., 2008, In : Journal of Alloys and Compounds. 461, 1-2, p. 173 - 177 5 p.

Research output: Contribution to journalArticleResearchpeer-review

Simulation of Contact Pressure in Sheet Metal Trimming/Blanking Process

Rafiee, R., Rolfe, B. F. & Yan, W., 2008, In : Advanced Materials Research. 41-42, p. 463 - 468 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Simulation of Three-Point Bending Test of Titanium Foam for Biomedical Applications

Kashef, S., Asgari, S. A., Hodgson, P. D. & Yan, W., 2008, In : Advanced Materials Research. 32, p. 237 - 240 4 p.

Research output: Contribution to journalArticleResearchpeer-review

Wearless scratch on NiTi shape memory alloy due to phase transformational shakedown

Feng, X-Q., Qian, L., Yan, W. & Sun, Q., 2008, In : Applied Physics Letters. 92, 12, p. 121909-1 - 121909-3 3 p.

Research output: Contribution to journalArticleResearchpeer-review

2007

Analysis of Spherical Indentation of Superelastic Shape Memory Alloys

Yan, W., Sun, Q., Feng, X-Q. & Qian, L., 2007, In : International Journal of Solids and Structures. 44, p. 1 - 17 17 p.

Research output: Contribution to journalArticleResearchpeer-review

Crushing Simulation of Foam-Filled Aluminium Tubes

Yan, W., Durif, E., Yamada, Y. & Wen, C., 2007, In : Materials Transactions. 48, p. 1901 - 1906 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Experimental study on effect of loading rate on mode I delamination of z-pin reinforced laminates

Liu, H-Y., Yan, W., Yu, X-Y. & Mai, Y-W., 2007, In : Composites Science and Technology. 67, p. 1294 - 1301 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Nanofretting behaviors of NiTi shape memory alloy

Qian, L., Zhou, Z., Sun, Q. & Yan, W., 2007, In : Wear. 263, p. 501 - 507 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Numerical simulation of the crushing of foam-filled aluminium tubes

Durif, E., Yan, W., Yamada, Y. & Wen, C., 2007, In : Key Engineering Materials. 334-335, p. 629 - 632 4 p.

Research output: Contribution to journalArticleResearchpeer-review

Spherical indentation of superelastic shape memory alloys

Yan, W. & Sun, Q., 2007, In : Key Engineering Materials. 334-335 I, p. 601 - 604 4 p.

Research output: Contribution to journalArticleResearchpeer-review

2006

Determination of transformation stresses of shape memory alloy thin films: A method based on spherical indentation

Yan, W., Sun, Q., Feng, X-Q. & Qian, L., 2006, In : Applied Physics Letters. 88, 24, p. 241912-1 - 241912-3 3 p.

Research output: Contribution to journalArticleResearchpeer-review

Indentation Hardness Analysis of Superelastic Shape Memory Alloys

Yan, W., Sun, Q. & Liu, H-Y., 2006, In : Key Engineering Materials. 312, p. 333 - 338 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Influence of Z-Pinning on the Buckling of Composite Laminates under Edge-wise Compression

Yan, W. & Liu, H-Y., 2006, In : Key Engineering Materials. 312, p. 127 - 132 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Observation of dislocation microstructures and simulation of stress field during fatigue crack initiation in a copper single crystal

Yang, J. H., Zhang, X. P., Mai, Y-W. W. & Yan, W., 2006, In : Key Engineering Materials. 312, p. 71 - 76 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Spherical indentation hardness of shape memory alloys

Yan, W., Sun, Q. & Liu, H-Y., 2006, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 425, p. 278 - 285 8 p.

Research output: Contribution to journalArticleResearchpeer-review