If you made any changes in Pure these will be visible here soon.

Research Output 1996 2019

Filter
Conference Paper
2018

Evaluation of the mechanical properties of laser cladded hypereutectoid steel rails

Roy, T., Abrahams, R., Paradowska, A., Lai, Q., Mutton, P., Soodi, M. & Yan, W., 1 Jan 2018, Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018. Nunez, A. & Li, Z. (eds.). TU Delft, p. 824-829 6 p. (Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Laser cladding for railway repair: Influence of depositing materials and heat treatment on microstructural characteristics

Lai, Q., Abrahams, R., Mutton, P., Qiu, C., Paradowska, A., Soodi, M., Roy, T. & Yan, W., 1 Jan 2018, ICRT 2017: Railway Development, Operations, and Maintenance - Proceedings of the First International Conference on Rail Transportation 2017. Zhai, W. & Wang, K. C. P. (eds.). Reston VA USA: American Society of Civil Engineers, p. 452-463 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Open Access
File

Numerical study on the ratcheting performance of heavy haul rails in curved tracks

Su, H., Pun, C. L., Mutton, P., Kan, Q. & Yan, W., 1 Jan 2018, Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018. Nunez, A. & Li, Z. (eds.). TU Delft, p. 938-947 10 p. (Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Ratcheting performance of flashbutt welds in premium Rail steels

Pun, C. L., Mutton, P., Welsby, D. & Yan, W., 1 Jan 2018, Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018. Nunez, A. & Li, Z. (eds.). TU Delft, p. 792-802 11 p. (Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Tribological behaviour of laser cladded rail under rolling contact test

Roy, T., Abrahams, R., Lai, Q., Mutton, P., Soodi, M., Paradowska, A. & Yan, W., 1 Jan 2018, ICRT 2017: Railway Development, Operations, and Maintenance - Proceedings of the First International Conference on Rail Transportation 2017. Zhai, W. & Wang, K. C. P. (eds.). Reston VA USA: American Society of Civil Engineers, p. 445-451 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2017

Effect of Cladding Direction on Residual Stress Distribution in Laser Cladded Rails

Roy, T., Paradowska, A., Abrahams, R., Lai, Q., Law, M., Mutton, P., Soodi, M. & Yan, W., 2017, International Journal of Civil and Environmental Engineering. Turkey: World Academy of Science, Engineering and Technology (WASET), Vol. 11. 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOtherpeer-review

Open Access
File

Effect of optimisation parameters in topology optimisation

Chiu, L. N. S., Stojanov, D., Rolfe, B. & Yan, W., 2017, 13th Asia-Pacific Symposium on Engineering Plasticity and Its Applications (AEPA 2016): December 4-8, 2016, Hiroshima, Japan. Yoshida, F. & Hamasaki, H. (eds.). Trans Tech Publications, p. 529-534 6 p. (Key Engineering Materials; vol. 725 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Experimental characterization of clad microstructure and its correlation with residual stresses

Paul, S., Thool, K., Singh, R., Samajdar, I. & Yan, W., 2017, 45th SME North American Manufacturing Research Conference, NAMRC 45: June 4-8, 2017, Los Angeles, California, USA [proceedings]. Wang, L., Fratini, L. & Shih, A. J. (eds.). Elsevier, p. 804-818 15 p. (Procedia Manufacturing; vol. 10).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Open Access
File

Finite element analysis of thermal cycle in laser cladding for railway repair

Lai, Q., Abrahams, R., Yan, W., Mutton, P., Qiu, C., Paradowska, A., Soodi, M. & Roy, T., 1 Jan 2017, 9th Australasian Congress on Applied Mechanics (ACAM 2017). Prusty, G. & Paradowska, A. (eds.). Sydney Australia: Engineers Australia, 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Modeling multiple damage mechanisms via a multi-fiber multi-layer representative volume element (M2RVE)

Soni, G., Singh, R. & Yan, W., 1 Jan 2017, 9th Australasian Congress on Applied Mechanics, ACAM 2017. National Committee on Applied Mechanics, (9th Australasian Congress on Applied Mechanics, ACAM 2017; vol. 2017-November).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Numerical analysis to determine critical height for multi layered laser cladding for die repair applications

Paul, S., Vundru, C., Singh, R. & Yan, W., 1 Jan 2017, 9th Australasian Congress on Applied Mechanics, ACAM 2017. National Committee on Applied Mechanics, 8 p. (9th Australasian Congress on Applied Mechanics, ACAM 2017; vol. 2017-November).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Numerical study on the compressive responses of bcc hollow truss lattice structures

Zhao, G. & Yan, W., 1 Jan 2017, 9th Australasian Congress on Applied Mechanics, ACAM 2017. National Committee on Applied Mechanics, (9th Australasian Congress on Applied Mechanics, ACAM 2017; vol. 2017-November).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Residual stress measurement in laser cladded rail utilizing neutron diffraction technique

Roy, T., Paradowska, A., Lai, Q., Abrahams, R., Law, M., Mutton, P., Soodi, M. & Yan, W., 1 Jan 2017, 9th Australasian Congress on Applied Mechanics (ACAM 2017). Prusty, G. & Paradowska, A. (eds.). Sydney Australia: Engineers Australia, 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2016

Numerical considerations for the implementation of a comprehensive composite damage model

Chiu, L. N. S., Falzon, B. G., Chen, B. & Yan, W., 25 Jul 2016, Advances of Computational Mechanics in Australia. Gu, Y., Guan, H., Sauret, E., Saha, S., Zhan, H. & Persky, R. (eds.). Pfaffikon Switzerland: Trans Tech Publications, p. 217-224 8 p. (Applied Mechanics and Materials; vol. 846).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2015

Microstructural characterization of high strength rail steels

Pun, C. L., Sho, K. C., Mutton, P. & Yan, W., 2015, 10th International Conference on Contact Mechanics of Wheel/Rail Systems (CM 2015): Colorado Springs, United States, 30 August 2015 - 3 September 2015 [proceedings]. International Conference on Contact Mechanics of Wheel / Rail Systems

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Prediction of rolling contact fatigue life based on ratcheting analysis

Pun, C. L., Kan, Q., Mutton, P., Kang, G. & Yan, W., 2015, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems (CM 2015): Colorado Springs, United States, 30 August 2015 - 3 September 2015 [proceedings]. International Conference on Contact Mechanics of Wheel / Rail Systems, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearch

2014

An application of bi-directional evolutionary structural optimisation for optimising energy absorbing structures using a material damage model

Stojanov, D., Falzon, B. G., Wu, X. & Yan, W., 2014, Advances in Computational Mechanics. Steven, G., Li, Q. & Zhang, Z. L. (eds.). Pfaffikon Switzerland: Trans Tech Publications, p. 836-841 6 p. (Applied Mechanics and Materials; vol. 553).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

An investigation into the effects of body-borne equipment on occupant injury under simulated vertical impact with seat 'bottoming-ou'

Aggromito, D., Thomson, R., Wang, J., Chen, B. & Yan, W., 2014, 70th American Helicopter Society International Annual Forum 2014. American Helicopter Society, Vol. 1. p. 397-406 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Comparison of failure criterion examining matrix dominant failure under biaxial loading

Chowdhury, N., Chiu, W. K., Wang, J. & Yan, W., 2014, Proceedings: The 8th Australasian Congress on Applied Mechanics 2014 (ACAM 8). Barton ACT Australia: Engineers Australia, p. 1 - 8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Natural frequency analysis of rat whiskers

Yan, W., Kan, Q. & Rajan, R., 2014, Recent Advances in Structural Integrity Analysis: Proceedings of the International Congress (APCF/SIF-2014). Ye, L., Kotousov, A. G. & Tu, S-T. (eds.). Cambridge UK: Woodhead Publishing Limited, p. 294 - 299 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Numerical modeling of graphene/polymer interfacial behaviour using peel test

Jia, Y. Y. & Yan, W., 2014, Advanced Materials Research: 11th International Fatigue Congress (FATIGUE 2014). Clark, G. & Wang, C. H. (eds.). Pfaffikon Switzerland: Trans Tech Publications, Vol. 891-892. p. 1119 - 1124 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

On constitutive models for ratcheting of a high strength rail steel

Pun, C. L. J., Kan, Q., Mutton, P. J., Kang, G. & Yan, W., 2014, Advanced Materials Research: 11th International Fatigue Congress (FATIGUE 2014). Clark, G. & Wang, C. H. (eds.). Pfaffikon Switzerland: Trans Tech Publications, Vol. 891-892. p. 1146 - 1151 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

On the evaluation of the stress state in rail head for assessing fatigue resistance

Pun, C. L. J., Kan, Q., Mutton, P. J., Kang, G. & Yan, W., 2014, Advanced Materials Research: 11th International Fatigue Congress (FATIGUE 2014). Clark, G. & Wang, C. H. (eds.). Pfaffikon Switzerland: Trans Tech Publications, Vol. 891-892. p. 1157 - 1162 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Thermal stress analysis of hydraulic hose in mining industry

Heraud, J., Dayawansa, D. & Yan, W., 1 Nov 2014, 8th Australasian Congress on Applied Mechanics, ACAM 2014: Melbourne, Australia, 25-26 November 2014. Barton, ACT: Engineers Australia, p. 981-989 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2013

A numerical model to simulate the pullout of carbon fibre with radially grown carbon nanotubes

Jia, Y. Y., Chen, Z. & Yan, W., 2013, Proceedings of ICF13. Yu, S. & Feng, X-Q. (eds.). China: China Science Literature Publishing House, p. 1 - 10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

A thermo-mechanically coupled cyclic plasticity model at large deformations considering inelastic heat generation

Kan, Q., Kang, G., Yan, W., Zhu, Y. & Jiang, H., 2013, Proceedings of ICF13. Yu, S. & Feng, X-Q. (eds.). China: China Science Literature Publishing House, p. 1 - 10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Model Based Systems Engineering (MBSE) applied through a sysML model to the mascot asteroid lander

Kretzenbacher, M., Findlay, R., Lange, C. & Yan, W., 2013, 64th International Astronautical Congress 2013, IAC 2013. International Astronautical Federation, IAF, Vol. 10. p. 8015-8022 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Ratchetting behaviour of high strength rail steel under uniaxial and biaxial cyclic loadings

Pun, C. L. J., Kan, Q., Mutton, P. J., Kang, G. & Yan, W., 2013, Proceedings of the 13th International Conference on Fracture. Yu, S. & Feng, X-Q. (eds.). Beijing PR China: China Science Literature Publishing House, p. 1 - 10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Verification of a novel material model to predict damage in composite structures

Chiu, L. N. S., Falzon, B., Boman, R., Chen, B. & Yan, W., 2013, Proceedings of the 8th International Conference on Structural Integrity and Fracture SIF2013. Wang, C. H. (ed.). Melbourne Vic Australia: Australian Fracture Group Inc, p. 131 - 134 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2012

An energy-based fatigue failure model for super-elastic NiTi alloys under pure mechanical cyclic loading

Kan, Q., Kang, G., Yan, W., Dong, Y. & Yu, C., 2012, Proceedings of SPIE - The International Society for Optical Engineering. Leng, J., Bar-Cohen, Y., Lee, I. & Lu, J. (eds.). Bellingham USA: SPIE, p. 1 - 8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

A study of cyclic thermal-mechanical response between wheel and rail based on fully coupled thermo-elastic-plastic analysis

Kan, Q., Kang, G., Yan, W., Ding, J. & Zhu, Y., 2012, 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2012: Chengdu, China; 27-30 August 2012. China: Southwest Jiaotong University Press, p. 750-751 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Experimental observation on the uniaxial cyclic deformation behaviour of TA16 titanium alloy

Kan, Q., Yan, W., Kang, G. & Guo, S., 2012, Advanced Material Research: Materials Processing Technology, ICAMMP2011. Bu, J., Jiang, Z. & Jiao, S. (eds.). Zurich Switzerland: Trans Tech Publications, Vol. 415-417. p. 2318 - 2321 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Numerical investigation of the mechanical behaviour of shape memory bulk metallic glass composites

Yan, W., Tilvawala, G. C. & Kan, Q. H., 2012, Proceedings of SPIE - International Society for Optical Engineering. Leng, J., Bar-Cohen, Y., Lee, I. & Lu, J. (eds.). Bellingham WA USA: SPIE, Vol. 8409. p. 1 - 9 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Numerical study on residual thermal stresses in carbon fibre pullout

Jia, Y. Y., Yan, W. & Liu, H-Y., 2012, ICAS 2012 CD-ROM Proceedings. Muller-Wiesner, D. (ed.). UK: Optimage Ltd, p. 1 - 6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Pile-up and sink-in in nanoindentation of stiff particle reinforced composites

Low, T. F., Yan, W. & Pun, C. L. J., 2012, 4th International Conference on Computational Methods. Gu, Y. T. & Saha, S. C. (eds.). Brisbane Qld Australia: Queensland University of Technology, p. 1 - 9 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Slipping in rail/wheel rolling contact

Pun, C. L., Yan, W. & Mutton, P., 2012, 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2012: Chengdu, China; 27-30 August 2012. China: Southwest Jiaotong University Press, p. 231-232 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Stress analysis in rail head of high strength rail steel in heavy haul operations

Pun, C. L., Yan, W. & Mutton, P. J., 2012, 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2012: Chengdu, China; 27-30 August 2012. China: Southwest Jiaotong University Press, p. 516-522 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearch

Tool wear in sheet metal stamping

Yan, W., Pereira, M. P. & Rolfe, B. F., 2012, Advanced Materials Research: Materials Processing Technology, ICAMMP2011. Jiang, Z., Han, J. & Liu, X. (eds.). Stafa-Zurich Switzerland: Trans Tech Publications, Vol. 421. p. 750 - 753 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2011

3D finite element modeling of the machining of Ti6Al4V alloys

Yang, J., Sun, S., Brandt, M. & Yan, W., 2011, Advanced Materials Research. Jiang, Z., Li, S., Zeng, J., Liao, X. & Yang, D. (eds.). Switzerland: Trans Tech Publications, Vol. 189-193. p. 1926 - 1929 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Numetrical study on carbon fibre pullout using a cohesive zone model

Jia, Y. Y., Yan, W. & Liu, H-Y., 2011, International Conference on Composites Materials (ICCM-18). Kim, B. S. (ed.). Seoul Korea: The Korean Society for Composite Materials, p. 1 - 6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2010

3D transient thermal modelling and experimental validation of the temperature distribution during laser heating of Ti6AI4V alloy

Yang, J., Sun, S., Brandt, M. & Yan, W., 2010, PRICM 7: Part 1. Nie, J-F. & Norton, A. (eds.). Pfaffikon Switzerland: Trans Tech Publications, p. 894-897 4 p. (Materials Science Forum; vol. 654-656).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Experimental investigation and 3D modeling of the temperature profile of TI6A14V alloy subjected to laser heating

Yang, J., Sun, S., Brandt, M. & Yan, W., 11 Jun 2010, 4th Pacific International Conference on Applications of Lasers and Optics, PICALO 2010. (4th Pacific International Conference on Applications of Lasers and Optics, PICALO 2010).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Material property influences on the modelling of child brain injuries

Yan, W. & Fittock, R., 2010, Proceedings of the 6th Australasian Congress on Applied Mechanics. Teh, K., Davies, I. & Howard, I. (eds.). Australia: Engineers Australia, p. 1 - 9 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Scaling relationships in spherical indentation of metallic foams

Yan, W. & Pun, C. L. J., 2010, Proceedings of the 2nd International Symp. on Computational Mechanics and the 12th International Conf. on the Enhancement and Promotion of Computational Methods in Engineering and Science. Lu, J. W. Z., Leung, A. Y. T., Iu, V. P. & Mok, K. M. (eds.). America: American Institute of Physics, p. 1148 - 1153 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2009

Scaling analysis for hardness of shape memory alloys in sharp conical indentation

Kang, G. Z., Kan, Q. H. & Yan, W., 2009, Proceedings of the SPIE, Volume 7493. Leng, J., Asundi, A. K. & Ecke, W. (eds.). America: SPIE, Vol. 7493. p. 74930K-1 - 74930K-6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2008

Contact pressure prediction in sheet metal forming using finite element analysis

Pereira, M. P., Yan, W. & Rolfe, B. F., 2008, Proceedings of the International Deep Drawing Research Group 2008 Conference. Asnafi, N. (ed.). Sweden: Swedish Deep Drawing Research Group (SDDRG), p. 361 - 371 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2007

A characteristic of spherical indentation curve and its application in measuring material properties

Yan, W., Sun, Q. & Hodgson, P. D., 2007, Materials Science Forum. Chang, Y. W., Kim, N. J. & Lee, C. S. (eds.). Switzerland: Trans Tech Publications, Vol. 561-565. p. 2131 - 2134 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Crushing modes of aluminium tubes under axial compression

Pled, F., Yan, W. & Wen, C., 2007, Proceedings of the 5th Australasian Congress on Applied Mechanics. Veidt, M., Albermani, F., Daniel, B., Griffiths, J., Hargreaves, D., McAree, R., Meehan, P. & Tan, A. (eds.). Brisbane Qld Australia: Engineers Australia, Vol. 1. p. 178 - 183 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Modeling of contact pressure in sheet metal forming

Pereira, M. P., Yan, W. & Rolfe, B. F., 2007, PRICM 6: Sixth Pacific Rim International Conference on Advanced Materials and Processing - Part 1. Chang, Y. W., Kim, N. J. & Lee, C. S. (eds.). Pfaffikon Switzerland: Trans Tech Publications, p. 1975-1978 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2006

Theoretical consideration on the fracture of shape memory Alloys

Yan, W. & Mai, Y. W., 1 Dec 2006, IUTAM Symposium on Mechanics and Reliability of Actuating Materials: Proceedigs of the IUTAM Symposium Held in Beijing, China, 1-3 September, 2004. p. 217-226 10 p. (Solid Mechanics and its Applications; vol. 127).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther