If you made any changes in Pure these will be visible here soon.

Research Output 1996 2019

2019

A 3D thermo-mechanically coupled model for describing rate-dependent super-elastic degeneration of NiTi shape memory alloys

Qiu, B., Kan, Q., Yu, C., Kang, G. & Yan, W., 1 Jul 2019, In : Mechanics Research Communications. 99, p. 32-41 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Evaluation of the mechanical properties of laser cladded hypereutectoid steel rails

Roy, T., Abrahams, R., Paradowska, A., Lai, Q., Mutton, P., Soodi, M., Fasihi, P. & Yan, W., 15 Aug 2019, In : Wear. 432-433, 12 p., 202930.

Research output: Contribution to journalArticleResearchpeer-review

Influences of depositing materials, processing parameters and heating conditions on material characteristics of laser-cladded hypereutectoid rails

Lai, Q., Abrahams, R., Yan, W., Qiu, C., Mutton, P., Paradowska, A., Soodi, M. & Wu, X., 1 Jan 2019, In : Journal of Materials Processing Technology. 263, p. 1-20 20 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Numerical investigation into the simultaneous growth of two closely spaced fluid-driven fractures

Chen, X., Zhao, J., Yan, W. & Zhang, X., 1 Feb 2019, In : SPE Journal. 24, 1, p. 274-289 16 p.

Research output: Contribution to journalArticleResearchpeer-review

2018

Classification of impact signals from insulated rail joints using spectral analysis

Yuen, A., Zheng, D., Mutton, P. & Yan, W., 1 Jan 2018, Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Cham Switzerland: Springer, p. 771-780 10 p. (Notes on Numerical Fluid Mechanics and Multidisciplinary Design; vol. 139).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Comparison on damage tolerance of scarf and stepped-lap bonded composite joints under quasi-static loading

Wu, C., Chen, C., He, L. & Yan, W., 15 Dec 2018, In : Composites Part B: Engineering. 155, p. 19-30 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Controlled graphene encapsulation: A nanoscale shield for characterising single bacterial cells in liquid

Li, J., Zheng, C., Liu, B., Chou, T., Kim, Y., Qiu, S., Li, J., Yan, W. & Fu, J., 2 Jul 2018, In : Nanotechnology. 29, 36, 11 p., 365705.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Critical deposition height for sustainable restoration via laser additive manufacturing

Paul, S., Singh, R., Yan, W., Samajdar, I., Paradowska, A., Thool, K. & Reid, M., 1 Dec 2018, In : Scientific Reports. 8, 1, 8 p., 14726.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Effect of deposition material and heat treatment on wear and rolling contact fatigue of laser cladded rails

Roy, T., Lai, Q., Abrahams, R., Mutton, P., Paradowska, A., Soodi, M. & Yan, W., 15 Oct 2018, In : Wear. 412-413, p. 69-81 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Effect of stiffness anisotropy on topology optimisation of additively manufactured structures

Chiu, L. N. S., Rolfe, B., Wu, X. & Yan, W., 15 Sep 2018, In : Engineering Structures. 171, p. 842-848 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Effects of preheating and carbon dilution on material characteristics of laser-cladded hypereutectoid rail steels

Lai, Q., Abrahams, R., Yan, W., Qiu, C., Mutton, P., Paradowska, A., Fang, X., Soodi, M. & Wu, X., 17 Jan 2018, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 712, p. 548-563 16 p.

Research output: Contribution to journalArticleResearchpeer-review

Evaluation of the mechanical properties of laser cladded hypereutectoid steel rails

Roy, T., Abrahams, R., Paradowska, A., Lai, Q., Mutton, P., Soodi, M. & Yan, W., 1 Jan 2018, Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018. Nunez, A. & Li, Z. (eds.). TU Delft, p. 824-829 6 p. (Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Laser cladding for railway repair: Influence of depositing materials and heat treatment on microstructural characteristics

Lai, Q., Abrahams, R., Mutton, P., Qiu, C., Paradowska, A., Soodi, M., Roy, T. & Yan, W., 1 Jan 2018, ICRT 2017: Railway Development, Operations, and Maintenance - Proceedings of the First International Conference on Rail Transportation 2017. Zhai, W. & Wang, K. C. P. (eds.). Reston VA USA: American Society of Civil Engineers, p. 452-463 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Open Access
File

Numerical analysis of multi-layered laser cladding for die repair applications to determine residual stresses and hardness

Vundru, C., Paul, S., Singh, R. & Yan, W., 1 Jan 2018, In : Procedia Manufacturing. 26, p. 952-961 10 p.

Research output: Contribution to journalConference articleOther

Open Access

Numerical study on the ratcheting performance of heavy haul rails in curved tracks

Su, H., Pun, C. L., Mutton, P., Kan, Q. & Yan, W., 1 Jan 2018, Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018. Nunez, A. & Li, Z. (eds.). TU Delft, p. 938-947 10 p. (Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Ratcheting performance of flashbutt welds in premium Rail steels

Pun, C. L., Mutton, P., Welsby, D. & Yan, W., 1 Jan 2018, Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018. Nunez, A. & Li, Z. (eds.). TU Delft, p. 792-802 11 p. (Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Thermo-mechanically coupled thermo-elasto-visco-plastic modeling of thermo-induced shape memory polyurethane at finite deformation

Li, J., Kan, Q. H., Zhang, Z. B., Kang, G. Z. & Yan, W., 1 Apr 2018, In : Acta Mechanica Solida Sinica. 31, 2, p. 141-160 20 p.

Research output: Contribution to journalArticleResearchpeer-review

Tribological behaviour of laser cladded rail under rolling contact test

Roy, T., Abrahams, R., Lai, Q., Mutton, P., Soodi, M., Paradowska, A. & Yan, W., 1 Jan 2018, ICRT 2017: Railway Development, Operations, and Maintenance - Proceedings of the First International Conference on Rail Transportation 2017. Zhai, W. & Wang, K. C. P. (eds.). Reston VA USA: American Society of Civil Engineers, p. 445-451 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2017

A case study of rail corrugation phenomenon based on the viewpoint of friction-induced oscillation of a wheelset-track system

Cui, X., Chen, G., Yang, H., Ouyang, H. & Yan, W., 1 Sep 2017, In : Journal of Vibroengineering. 19, 6, p. 4516-4530 15 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

A multi-body dynamics study on a weight-drop test of rat brain injury

Yan, W., Sossou, G. & Rajan, R., 26 Apr 2017, In : Computer methods in biomechanics and biomedical engineering. 20, 6, p. 602-616 15 p.

Research output: Contribution to journalArticleResearchpeer-review

A numerical study on contact condition and wear of roller in cold rolling

Jin, Q., Wang, W., Jiang, R., Chiu, L. N. S., Liu, D. & Yan, W., 15 Sep 2017, In : Metals. 7, 9, 21 p., 376.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

A shear-lag analysis of stress transfer through a cohesive fibre-matrix interface

Chen, Z. & Yan, W., 1 Jan 2017.

Research output: Contribution to conferencePaperOther

Axisymmetric structural optimization design and void control for selective laser melting

Stojanov, D., Wu, X., Falzon, B. G. & Yan, W., 1 Nov 2017, In : Structural and Multidisciplinary Optimization. 56, 5, p. 1027-1043 17 p.

Research output: Contribution to journalArticleResearchpeer-review

Effect of Cladding Direction on Residual Stress Distribution in Laser Cladded Rails

Roy, T., Paradowska, A., Abrahams, R., Lai, Q., Law, M., Mutton, P., Soodi, M. & Yan, W., 2017, International Journal of Civil and Environmental Engineering. Turkey: World Academy of Science, Engineering and Technology (WASET), Vol. 11. 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOtherpeer-review

Open Access
File

Effect of optimisation parameters in topology optimisation

Chiu, L. N. S., Stojanov, D., Rolfe, B. & Yan, W., 2017, 13th Asia-Pacific Symposium on Engineering Plasticity and Its Applications (AEPA 2016): December 4-8, 2016, Hiroshima, Japan. Yoshida, F. & Hamasaki, H. (eds.). Trans Tech Publications, p. 529-534 6 p. (Key Engineering Materials; vol. 725 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Effects of Lumbar Spine Assemblies and Body-Borne Equipment Mass on Anthropomorphic Test Device Responses during Drop Tests

Aggromito, D., Jaffrey, M., Chhor, A., Chen, B. & Yan, W., 1 Oct 2017, In : Journal of Biomechanical Engineering-Transactions of the Asme. 139, 10, 8 p., 101004.

Research output: Contribution to journalArticleResearchpeer-review

Experimental characterization of clad microstructure and its correlation with residual stresses

Paul, S., Thool, K., Singh, R., Samajdar, I. & Yan, W., 2017, 45th SME North American Manufacturing Research Conference, NAMRC 45: June 4-8, 2017, Los Angeles, California, USA [proceedings]. Wang, L., Fratini, L. & Shih, A. J. (eds.). Elsevier, p. 804-818 15 p. (Procedia Manufacturing; vol. 10).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Open Access
File

Field investigation and numerical study of the rail corrugation caused by frictional self-excited vibration

Cui, X., Chen, G., Zhao, J., Yan, W., Ouyang, H. & Zhu, M., 15 Apr 2017, In : Wear. 376-377, Part B, p. 1919-1929 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Finite element analysis of thermal cycle in laser cladding for railway repair

Lai, Q., Abrahams, R., Yan, W., Mutton, P., Qiu, C., Paradowska, A., Soodi, M. & Roy, T., 1 Jan 2017, 9th Australasian Congress on Applied Mechanics (ACAM 2017). Prusty, G. & Paradowska, A. (eds.). Sydney Australia: Engineers Australia, 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Investigation of a novel functionally graded material for the repair of premium hypereutectoid rails using laser cladding technology

Lai, Q., Abrahams, R., Yan, W., Qiu, C., Mutton, P., Paradowska, A. & Soodi, M., 1 Dec 2017, In : Composites Part B: Engineering. 130, p. 174-191 18 p.

Research output: Contribution to journalArticleResearchpeer-review

Modeling multiple damage mechanisms via a multi-fiber multi-layer representative volume element (M2RVE)

Soni, G., Singh, R. & Yan, W., 1 Jan 2017, 9th Australasian Congress on Applied Mechanics, ACAM 2017. National Committee on Applied Mechanics, (9th Australasian Congress on Applied Mechanics, ACAM 2017; vol. 2017-November).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Modelling interacting cracks through a level set using the element-free Galerkin method

Muthu, N., Maiti, S. K., Yan, W. & Falzon, B. G., 1 Dec 2017, In : International Journal of Mechanical Sciences. 134, p. 203-215 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Numerical analysis to determine critical height for multi layered laser cladding for die repair applications

Paul, S., Vundru, C., Singh, R. & Yan, W., 1 Jan 2017, 9th Australasian Congress on Applied Mechanics, ACAM 2017. National Committee on Applied Mechanics, 8 p. (9th Australasian Congress on Applied Mechanics, ACAM 2017; vol. 2017-November).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Numerical study on the compressive responses of bcc hollow truss lattice structures

Zhao, G. & Yan, W., 1 Jan 2017, 9th Australasian Congress on Applied Mechanics, ACAM 2017. National Committee on Applied Mechanics, (9th Australasian Congress on Applied Mechanics, ACAM 2017; vol. 2017-November).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Residual stress measurement in laser cladded rail utilizing neutron diffraction technique

Roy, T., Paradowska, A., Lai, Q., Abrahams, R., Law, M., Mutton, P., Soodi, M. & Yan, W., 1 Jan 2017, 9th Australasian Congress on Applied Mechanics (ACAM 2017). Prusty, G. & Paradowska, A. (eds.). Sydney Australia: Engineers Australia, 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Springback and forward slip compensation in designing roller cavity surfaces for net-shape rolling compressor blades

Jin, Q., Wang, W., Yan, W. & Jiang, R., 12 Apr 2017, In : Materials and Manufacturing Processes. 32, 12, p. 1442-1449 8 p.

Research output: Contribution to journalArticleResearchpeer-review

2016

Crack propagation in non-homogenous materials: Evaluation of mixed-mode SIFs, T-stress and kinking angle using a variant of EFG method

Muthu, N., Maiti, S. K., Falzon, B. G. & Yan, W., 1 Nov 2016, In : Engineering Analysis with Boundary Elements. 72, p. 11-26 16 p.

Research output: Contribution to journalArticleResearchpeer-review

Experimental observations on rate-dependent cyclic deformation of super-elastic NiTi shape memory alloy

Kan, Q., Yu, C., Kang, G., Li, J. & Yan, W., 1 Jun 2016, In : Mechanics of Materials. 97, p. 48 - 58 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Implementing a structural continuity constraint and a halting method for the topology optimization of energy absorbers

Stojanov, D., Falzon, B. G., Wu, X. & Yan, W., 1 Sep 2016, In : Structural and Multidisciplinary Optimization. 54, 3, p. 429-448 20 p.

Research output: Contribution to journalArticleResearchpeer-review

Matrix failure in composite laminates under compressive loading

Chowdhury, N. T., Wang, J., Chiu, W. K. & Yan, W., 1 May 2016, In : Composites Part A: Applied Science and Manufacturing. 84, p. 103-113 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Matrix failure in composite laminates under tensile loading

Chowdhury, N. T., Wang, J., Chiu, W. K. & Yan, W., 1 Jan 2016, In : Composite Structures. 135, p. 61-73 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Numerical considerations for the implementation of a comprehensive composite damage model

Chiu, L. N. S., Falzon, B. G., Chen, B. & Yan, W., 25 Jul 2016, Advances of Computational Mechanics in Australia. Gu, Y., Guan, H., Sauret, E., Saha, S., Zhan, H. & Persky, R. (eds.). Pfaffikon Switzerland: Trans Tech Publications, p. 217-224 8 p. (Applied Mechanics and Materials; vol. 846).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Predicting matrix failure in composite structures using a hybrid failure criterion

Chowdhury, N. T., Wang, J., Chiu, W. K. & Yan, W., 1 Mar 2016, In : Composite Structures. 137, p. 148-158 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Residual stresses introduced to composite structuresdue to the cure regime: Effect of environment temperatureand moisture

Chowdhury, N., Wang, J., Chiu, W. K. & Yan, W., 2016, In : Journal of Composites. 2016, 13 p., 6468032.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Retraction notice: "Mixed mode peeling of spinnable carbon nanotube webs” (Materials and Design (2014) 62 (7–13))

Khandoker, N., Ibrahim, R., Yan, W., Hawkins, S. C. & Huynh, C. P., 5 Oct 2016, In : Materials & Design. 107, p. 530 1 p.

Research output: Contribution to journalComment / DebateOther

Thermal model for additive restoration of mold steels using crucible steel

Paul, S., Singh, R. & Yan, W., 1 Oct 2016, In : Journal of Manufacturing Processes. 24, Part 2, p. 346-354 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Two-dimensional shape memory graphene oxide

Chang, Z., Deng, J., Chandrakumara, G. G., Yan, W. & Liu, J. Z., 21 Jun 2016, In : Nature Communications. 7, 9 p., 11972.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Two-way actuation of graphene oxide arising from quantum mechanical effects

Chang, Z., Deng, J., Chandrakumara, G. G., Yan, W. & Liu, J. Z., 3 Oct 2016, In : Applied Physics Letters. 109, 14, 5 p., 143902.

Research output: Contribution to journalArticleResearchpeer-review

Validation of a 3D damage model for predicting the response of composite structures under crushing loads

Chiu, L. N. S., Falzon, B. G., Chen, B. & Yan, W., 1 Jul 2016, In : Composite Structures. 147, p. 65-73 9 p.

Research output: Contribution to journalArticleResearchpeer-review