If you made any changes in Pure these will be visible here soon.

Research Output 2006 2020

Filter
Article
2020

Effect of van der Waals force on bubble dynamics in bubbling fluidized beds of ellipsoidal particles

Shrestha, S., Kuang, S. B., Yu, A. B. & Zhou, Z. Y., 2 Feb 2020, In : Chemical Engineering Science. 212, 17 p., 115343.

Research output: Contribution to journalArticleResearchpeer-review

Experimental and numerical study of coarse particle conveying in the small absorber sphere system: overview and some recent CFD-DEM simulations

Li, T., Zhang, H., Kuang, S., Yan, H., Diao, X., Huang, Z., Bo, H. & Dong, Y., 1 Feb 2020, In : Nuclear Engineering and Design. 357, 14 p., 110420.

Research output: Contribution to journalArticleOtherpeer-review

2019
1 Citation (Scopus)

Bubble dynamics in bubbling fluidized beds of ellipsoidal particles

Shrestha, S., Kuang, S., Yu, A. & Zhou, Z., Nov 2019, In : AIChE Journal. 65, 11, 17 p., e16736.

Research output: Contribution to journalArticleResearchpeer-review

10 Citations (Scopus)

CFD-DEM modelling and simulation of pneumatic conveying: a review

Kuang, S., Zhou, M. & Yu, A., 12 Feb 2019, (Accepted/In press) In : Powder Technology. 22 p.

Research output: Contribution to journalArticleOtherpeer-review

CFD-DEM modelling of hydraulic conveying of solid particles in a vertical pipe

Zhou, M., Wang, S., Kuang, S., Luo, K., Fan, J. & Yu, A., 1 Sep 2019, In : Powder Technology. 354, p. 893-905 13 p.

Research output: Contribution to journalArticleResearchpeer-review

CFD-DEM simulation of large-scale dilute-phase pneumatic conveying system

Kuang, S., Li, K. & Yu, A., 19 Sep 2019, (Accepted/In press) In : Industrial and Engineering Chemistry Research. 11 p.

Research output: Contribution to journalArticleResearchpeer-review

5 Citations (Scopus)

CFD simulation of dilute-phase pneumatic conveying of powders

Miao, Z., Kuang, S., Zughbi, H. & Yu, A., 1 May 2019, In : Powder Technology. 349, p. 70-83 14 p.

Research output: Contribution to journalArticleResearchpeer-review

1 Citation (Scopus)

Direct numerical simulation of turbulent non-Newtonian flow using OpenFOAM

Zheng, E. Z., Rudman, M., Singh, J. & Kuang, S. B., 1 Aug 2019, In : Applied Mathematical Modelling. 72, p. 50-67 18 p.

Research output: Contribution to journalArticleResearchpeer-review

5 Citations (Scopus)

Lattice Boltzmann investigation of non-Newtonian fluid flow through a packed bed of uniform spheres

Qi, Z., Kuang, S. & Yu, A., 1 Feb 2019, In : Powder Technology. 343, p. 225-236 12 p.

Research output: Contribution to journalArticleResearchpeer-review

3 Citations (Scopus)

Modeling of the variations of permeate flux, concentration polarization, and solute rejection in nanofiltration system

Zhang, Y., Zhang, L., Hou, L., Kuang, S. & Yu, A., Mar 2019, In : AIChE Journal. 65, 3, p. 1076-1087 12 p.

Research output: Contribution to journalArticleResearchpeer-review

2 Citations (Scopus)

Numerical investigation of burden distribution in ironmaking blast furnace

Li, Z., Kuang, S., Liu, S., Gan, J., Yu, A., Li, Y. & Mao, X., 15 Jul 2019, In : Powder Technology. 353, p. 385-397 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Numerical investigation of hydrocyclone feed inlet configurations for mitigating particle misplacement

Ji, L., Kuang, S. & Yu, A., 11 Sep 2019, In : Industrial and Engineering Chemistry Research. 58, 36, p. 16823-16833 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Numerical simulation of dense-phase pneumatic transport of powder in horizontal pipes

Miao, Z., Kuang, S., Zughbi, H. & Yu, A., 17 Oct 2019, (Accepted/In press) In : Powder Technology. 12 p.

Research output: Contribution to journalArticleResearchpeer-review

6 Citations (Scopus)

Particle shape effect on bubble dynamics in central air jet pseudo-2D fluidized beds: a CFD-DEM study

Shrestha, S., Kuang, S., Yu, A. & Zhou, Z., 29 Jun 2019, In : Chemical Engineering Science. 201, p. 448-466 19 p.

Research output: Contribution to journalArticleResearchpeer-review

5 Citations (Scopus)

Prediction of separation performance of hydrocyclones by a PC-based model

Ji, L., Chen, J., Kuang, S., Qi, Z., Chu, K. & Yu, A., 18 Mar 2019, In : Separation and Purification Technology. 211, p. 141-150 10 p.

Research output: Contribution to journalArticleResearchpeer-review

2018
10 Citations (Scopus)

Investigation on vertical plug formation of coarse particles in a non-mechanical feeder by CFD-DEM coupling method

Zhang, H., Li, T., Huang, Z., Kuang, S. & Yu, A., 1 Jun 2018, In : Powder Technology. 332, p. 79-89 11 p.

Research output: Contribution to journalArticleResearchpeer-review

11 Citations (Scopus)

Lattice Boltzmann investigation of the wake effect on the interaction between particle and power-law fluid flow

Qi, Z., Kuang, S., Rong, L. & Yu, A., 15 Feb 2018, In : Powder Technology. 326, p. 208-221 14 p.

Research output: Contribution to journalArticleResearchpeer-review

5 Citations (Scopus)

Model A vs. Model B in the modelling of particle-fluid flow

Chu, K. W., Kuang, S. B., Zhou, Z. Y. & Yu, A. B., 15 Apr 2018, In : Powder Technology. 329, p. 47-54 8 p.

Research output: Contribution to journalArticleResearchpeer-review

7 Citations (Scopus)

Modelling the multiphase flow in hydrocyclones using Coarse-grained VOF-DEM and Mixture-DEM approaches

Ji, L., Chu, K., Kuang, S., Chen, J. & Yu, A., 2018, In : Industrial and Engineering Chemistry Research. 57, 29, p. 9641–9655 15 p.

Research output: Contribution to journalArticleResearchpeer-review

4 Citations (Scopus)

Numerical Investigation of Gas-Liquid Flow in a Newly Developed Carbonation Reactor

Li, R., Kuang, S., Zhang, T., Liu, Y. & Yu, A., 10 Jan 2018, In : Industrial and Engineering Chemistry Research. 57, 1, p. 380-391 12 p.

Research output: Contribution to journalArticleResearchpeer-review

8 Citations (Scopus)

Numerical Investigation of Novel Oxygen Blast Furnace Ironmaking Processes

Li, Z., Kuang, S., Yu, A., Gao, J., Qi, Y., Yan, D., Li, Y. & Mao, X., 1 Aug 2018, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 49, 4, p. 1995–2010 16 p.

Research output: Contribution to journalArticleResearchpeer-review

8 Citations (Scopus)

Particle scale modelling of bubble properties in central air jet gas-solid fluidized beds

Shrestha, S., Kuang, S. B. & Zhou, Z. Y., 1 Nov 2018, In : Powder Technology. 339, p. 70-80 11 p.

Research output: Contribution to journalArticleResearchpeer-review

The computation of strain rate tensor in multiple-relaxation-time lattice Boltzmann model

Zhang, W., Huang, C., Wang, Y., Shi, B., Kuang, S. & Chai, Z., 15 Apr 2018, In : Computers and Mathematics with Applications. 75, 8, p. 2888-2902 15 p.

Research output: Contribution to journalArticleResearchpeer-review

2017
9 Citations (Scopus)

A DEM-based approach for analyzing energy transitions in granular and particle-fluid flows

Hou, Q. F., Kuang, S. B. & Yu, A., 6 Apr 2017, In : Chemical Engineering Science. 161, p. 67-79 13 p.

Research output: Contribution to journalArticleResearchpeer-review

1 Citation (Scopus)

A Reaction Method for Estimating Gibbs Energy and Enthalpy of Formation of Complex Minerals

Li, R., Zhang, T., Liu, Y. & Kuang, S., Apr 2017, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 48, 2, p. 1123-1133 11 p.

Research output: Contribution to journalArticleResearchpeer-review

10 Citations (Scopus)

Characteristics of red mud slurry flow in carbonation reactor

Li, R., Zhang, T., Liu, Y., Zhou, J., Zou, R. & Kuang, S., 15 Apr 2017, In : Powder Technology. 311, p. 66-76 11 p.

Research output: Contribution to journalArticleResearchpeer-review

23 Citations (Scopus)

Computational analysis and optimization of hydrocyclone size tomitigate adverse effect of particle density

Ji, L., Kuang, S., Qi, Z., Wang, Y., Chen, J. & Yu, A., 1 Mar 2017, In : Separation and Purification Technology. 174, p. 251-263 13 p.

Research output: Contribution to journalArticleResearchpeer-review

28 Citations (Scopus)

DEM-based virtual experimental blast furnace: A quasi-steady state model

Hou, Q., E, D., Kuang, S., Li, Z. & Yu, A., 1 Jun 2017, In : Powder Technology. 314, p. 557-566 10 p.

Research output: Contribution to journalArticleResearchpeer-review

18 Citations (Scopus)

Dissection investigation of Ti(C,N) behavior in blast furnace hearth during vanadium titano-magnetite smelting

Jiao, K., Zhang, J., Liu, Z., Kuang, S. & Liu, Y., 2017, In : ISIJ International. 57, 1, p. 48-54 7 p.

Research output: Contribution to journalArticleResearchpeer-review

3 Citations (Scopus)

Mathematical modeling of liquid slag layer fluctuation and slag droplets entrainment in a continuous casting mold based on VOF-les method

Zhao, P., Li, Q., Kuang, S. B. & Zou, Z., 24 May 2017, In : High Temperature Materials and Processes. 36, 5, p. 551-565 15 p.

Research output: Contribution to journalArticleResearchpeer-review

6 Citations (Scopus)
2016
34 Citations (Scopus)

Computational investigation of the effect of particle density on the multiphase flows and performance of hydrocyclone

Ghodrat, M., Qi, Z., Kuang, S. B., Ji, L. & Yu, A. B., 1 May 2016, In : Minerals Engineering. 90, p. 55-69 15 p.

Research output: Contribution to journalArticleResearchpeer-review

11 Citations (Scopus)

Computational investigation of the splashing phenomenon induced by the impingement of multiple supersonic jets onto a molten slag-metal bath

Li, M., Li, Q., Kuang, S. & Zou, Z., 2016, In : Industrial and Engineering Chemistry Research. 55, 12, p. 3630 - 3640 11 p.

Research output: Contribution to journalArticleResearchpeer-review

9 Citations (Scopus)

Determination of cavity dimensions induced by impingement of gas jets onto a liquid bath

Li, M., Li, Q., Kuang, S. & Zou, Z., 2016, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 47, 1, p. 116 - 126 11 p.

Research output: Contribution to journalArticleResearchpeer-review

3 Citations (Scopus)

Microstructure and wear resistance of a novel Mo-Ni-Si system intermetallic composite with ductile Mo phase

Song, C., Gui, Y., Kuang, S., Wang, S. & Zhao, D., 8 Apr 2016, In : Materials Transactions. 57, 5, p. 721-725 5 p.

Research output: Contribution to journalArticleResearchpeer-review

9 Citations (Scopus)

Transferring characteristics of momentum/energy during oxygen jetting into the molten bath in BOFs: a computational exploration

Li, M., Li, Q., Kuang, S. & Zou, Z., Mar 2016, In : Steel Research International. 87, 3, p. 288-300 13 p.

Research output: Contribution to journalArticleResearchpeer-review

2 Citations (Scopus)

Understanding Characteristic of Abrasion of Refractory Lining Caused by Bath Oscillation in BOF Steelmaking

Li, Q., Li, M., Kuang, S. B. & Zou, Z., 1 Dec 2016, In : JOM. 68, 12, p. 3126-3133 8 p.

Research output: Contribution to journalArticleResearchpeer-review

2015
13 Citations (Scopus)

Coalescence characteristics of supersonic jets from multi-nozzle oxygen lance in steelmaking BOF

Li, M., Li, Q., Kuang, S. & Zou, Z., 2015, In : Steel Research International. 86, 12, p. 1517-1529 13 p.

Research output: Contribution to journalArticleResearchpeer-review

13 Citations (Scopus)

Numerical investigation of the separation behaviours of fine particles in large dense medium cyclones

Qi, Z., Kuang, S. B. & Yu, A. B., 10 Sep 2015, In : International Journal of Mineral Processing. 142, p. 35-45 11 p.

Research output: Contribution to journalArticleResearchpeer-review

38 Citations (Scopus)
2014
27 Citations (Scopus)

CFD modeling and analysis of the multiphase flow and performance of dense medium cyclones

Kuang, S., Qi, Z., Yu, A., Vince, A., Barnett, G. D. & Barnett, P. J., Jul 2014, In : Minerals Engineering. 62, p. 43-54 12 p.

Research output: Contribution to journalArticleResearchpeer-review

15 Citations (Scopus)

Computational study on the behaviours of supersonic jets and their impingement onto molten liquid free surface in BOF steelmaking

Li, Q., Li, M., Kuang, S. & Zou, Z., 2014, In : Canadian Metallurgical Quarterly. 53, 3, p. 340-351 12 p.

Research output: Contribution to journalArticleResearchpeer-review

35 Citations (Scopus)

Numerical analysis of hydrocyclones with different conical section designs

Ghodrat, M., Kuang, S., Yu, A., Vince, A., Barnett, G. D. & Barnett, P. J., 2014, In : Minerals Engineering. 62, p. 74-84 11 p.

Research output: Contribution to journalArticleResearchpeer-review

38 Citations (Scopus)

Numerical analysis of hydrocyclones with different vortex finder configurations

Ghodrat, M., Kuang, S. B., Yu, A. B., Vince, A., Barnett, G. D. & Barnett, P. J., 2014, In : Minerals Engineering. 63, p. 125-138 14 p.

Research output: Contribution to journalArticleResearchpeer-review

37 Citations (Scopus)

Numerical study of horizontal pneumatic conveying: Effect of material properties

Li, K., Kuang, S. B., Pan, R. H. & Yu, A. B., 2014, In : Powder Technology. 251, p. 15 - 24 10 p.

Research output: Contribution to journalArticleResearchpeer-review

25 Citations (Scopus)

Prediction of wear and its effect on the multiphase flow and separation performance of dense medium cyclone

Chu, K. W., Kuang, S. B., Yu, A. B., Vince, A., Barnett, G. D. & Barnett, P. J., 2014, In : Minerals Engineering. 56, p. 91 - 101 11 p.

Research output: Contribution to journalArticleResearchpeer-review

2013
41 Citations (Scopus)

Application of periodic boundary conditions to CFD-DEM simulation of gas-solid flow in pneumatic conveying

Kuang, S., Li, K., Zou, R., Pan, R. & Yu, A., 2013, In : Chemical Engineering Science. 93, p. 214 - 228 15 p.

Research output: Contribution to journalArticleResearchpeer-review

31 Citations (Scopus)

Computational study of the multiphase flow and performance of hydrocyclones: Effects of cyclone size and spigot diameter

Ghodrat, M., Kuang, S., Yu, A., Vince, A., Barnett, G. D. & Barnett, P. J., 2013, In : Industrial and Engineering Chemistry Research. 52, 45, p. 16019 - 16031 13 p.

Research output: Contribution to journalArticleResearchpeer-review

24 Citations (Scopus)

Discrete particle simulation of jet-induced cratering of a granular bed

Kuang, S., LaMarche, C. Q., Curtis, J. S. & Yu, A., 2013, In : Powder Technology. 239, p. 319 - 336 18 p.

Research output: Contribution to journalArticleResearchpeer-review