If you made any changes in Pure these will be visible here soon.

Research Output 2006 2019

A DEM-based approach for analyzing energy transitions in granular and particle-fluid flows

Hou, Q. F., Kuang, S. B. & Yu, A., 6 Apr 2017, In : Chemical Engineering Science. 161, p. 67-79 13 p.

Research output: Contribution to journalArticleResearchpeer-review

A new point-locating algorithm under three-dimensional hybrid meshes

Kuang, S., Yu, A. & Zou, Z., 2008, In : International Journal of Multiphase Flow. 34, 11, p. 1023 - 1030 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Application of periodic boundary conditions to CFD-DEM simulation of gas-solid flow in pneumatic conveying

Kuang, S., Li, K., Zou, R., Pan, R. & Yu, A., 2013, In : Chemical Engineering Science. 93, p. 214 - 228 15 p.

Research output: Contribution to journalArticleResearchpeer-review

A Reaction Method for Estimating Gibbs Energy and Enthalpy of Formation of Complex Minerals

Li, R., Zhang, T., Liu, Y. & Kuang, S., Apr 2017, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 48, 2, p. 1123-1133 11 p.

Research output: Contribution to journalArticleResearchpeer-review

CFD-DEM modelling and simulation of pneumatic conveying: a review

Kuang, S., Zhou, M. & Yu, A., 12 Feb 2019, (Accepted/In press) In : Powder Technology. 22 p.

Research output: Contribution to journalArticleOtherpeer-review

CFD-DEM modelling of hydraulic transport of coarse solids in vertical pipelines

Abbaszadeh Molaei, E., Kuang, S. B., Zhou, Z. Y. & Yu, A. B., 2017, 20th International Conference on Hydrotransport. Graham, L., Sanders, S. & Sumner, R. (eds.). Bedfordshire UK: BHR Group Limited, p. 341-354 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

CFD modeling and analysis of the multiphase flow and performance of dense medium cyclones

Kuang, S., Qi, Z., Yu, A., Vince, A., Barnett, G. D. & Barnett, P. J., Jul 2014, In : Minerals Engineering. 62, p. 43-54 12 p.

Research output: Contribution to journalArticleResearchpeer-review

CFD simulation of dilute-phase pneumatic conveying of powders

Miao, Z., Kuang, S., Zughbi, H. & Yu, A., 1 May 2019, In : Powder Technology. 349, p. 70-83 14 p.

Research output: Contribution to journalArticleResearchpeer-review

Characteristics of red mud slurry flow in carbonation reactor

Li, R., Zhang, T., Liu, Y., Zhou, J., Zou, R. & Kuang, S., 15 Apr 2017, In : Powder Technology. 311, p. 66-76 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Coalescence characteristics of supersonic jets from multi-nozzle oxygen lance in steelmaking BOF

Li, M., Li, Q., Kuang, S. & Zou, Z., 2015, In : Steel Research International. 86, 12, p. 1517-1529 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Computational analysis and optimization of hydrocyclone size tomitigate adverse effect of particle density

Ji, L., Kuang, S., Qi, Z., Wang, Y., Chen, J. & Yu, A., 1 Mar 2017, In : Separation and Purification Technology. 174, p. 251-263 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Computational investigation of horizontal slug flow in pneumatic conveying

Kuang, S., Chu, K., Yu, A., Zou, Z. & Feng, Y., 2008, In : Industrial and Engineering Chemistry Research. 42, 2, p. 470 - 480 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Computational investigation of the effect of particle density on the multiphase flows and performance of hydrocyclone

Ghodrat, M., Qi, Z., Kuang, S. B., Ji, L. & Yu, A. B., 1 May 2016, In : Minerals Engineering. 90, p. 55-69 15 p.

Research output: Contribution to journalArticleResearchpeer-review

Computational investigation of the splashing phenomenon induced by the impingement of multiple supersonic jets onto a molten slag-metal bath

Li, M., Li, Q., Kuang, S. & Zou, Z., 2016, In : Industrial and Engineering Chemistry Research. 55, 12, p. 3630 - 3640 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Computational study of flow regimes in vertical pneumatic conveying

Kuang, S., Yu, A. & Zou, Z., 2009, In : Industrial and Engineering Chemistry Research. 48, 14, p. 6846 - 6858 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Computational study of the multiphase flow and performance of hydrocyclones: Effects of cyclone size and spigot diameter

Ghodrat, M., Kuang, S., Yu, A., Vince, A., Barnett, G. D. & Barnett, P. J., 2013, In : Industrial and Engineering Chemistry Research. 52, 45, p. 16019 - 16031 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Computational study on the behaviours of supersonic jets and their impingement onto molten liquid free surface in BOF steelmaking

Li, Q., Li, M., Kuang, S. & Zou, Z., 2014, In : Canadian Metallurgical Quarterly. 53, 3, p. 340-351 12 p.

Research output: Contribution to journalArticleResearchpeer-review

DEM-based virtual experimental blast furnace: A quasi-steady state model

Hou, Q., E, D., Kuang, S., Li, Z. & Yu, A., 1 Jun 2017, In : Powder Technology. 314, p. 557-566 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Determination of cavity dimensions induced by impingement of gas jets onto a liquid bath

Li, M., Li, Q., Kuang, S. & Zou, Z., 2016, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 47, 1, p. 116 - 126 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Discrete particle simulation of jet-induced cratering of a granular bed

Kuang, S., LaMarche, C. Q., Curtis, J. S. & Yu, A., 2013, In : Powder Technology. 239, p. 319 - 336 18 p.

Research output: Contribution to journalArticleResearchpeer-review

Discrete particle simulation of particle-fluid flow: model formulations and their applicability

Zhou, Z., Kuang, S., Chu, K. & Yu, A., 2010, In : Journal of Fluid Mechanics. 661, p. 482 - 510 29 p.

Research output: Contribution to journalArticleResearchpeer-review

Discrete particle simulation of the unstable motion of particle slugs in horizontal pneumatic conveying

Kuang, S. B., Yu, A. B., Zou, Z. S. & Pan, R. H., 1 Dec 2007.

Research output: Contribution to conferencePaperOtherpeer-review

Dissection investigation of Ti(C,N) behavior in blast furnace hearth during vanadium titano-magnetite smelting

Jiao, K., Zhang, J., Liu, Z., Kuang, S. & Liu, Y., 2017, In : ISIJ International. 57, 1, p. 48-54 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Flow regimes in vertical pneumatic conveying

Kuang, S., Yu, A. & Zou, Z., 2009, Powders and Grains 2009: Proceedings of the 6th International Conference on Micromechanics of Granular Media. Nakagawa, M. & Luding, S. (eds.). Melville NY USA: American Institute of Physics, Vol. 1145. p. 1005 - 1008 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Gas-solid flow and energy dissipation in inclined pneumatic conveying

Kuang, S., Zou, R., Pan, R. & Yu, A., 2012, In : Industrial and Engineering Chemistry Research. 51, 43, p. 14289 - 14302 14 p.

Research output: Contribution to journalArticleResearchpeer-review

Investigation on vertical plug formation of coarse particles in a non-mechanical feeder by CFD-DEM coupling method

Zhang, H., Li, T., Huang, Z., Kuang, S. & Yu, A., 1 Jun 2018, In : Powder Technology. 332, p. 79-89 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Lattice Boltzmann investigation of non-Newtonian fluid flow through a packed bed of uniform spheres

Qi, Z., Kuang, S. & Yu, A., 1 Feb 2019, In : Powder Technology. 343, p. 225-236 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Lattice Boltzmann investigation of the wake effect on the interaction between particle and power-law fluid flow

Qi, Z., Kuang, S., Rong, L. & Yu, A., 15 Feb 2018, In : Powder Technology. 326, p. 208-221 14 p.

Research output: Contribution to journalArticleResearchpeer-review

Mathematical modeling of liquid slag layer fluctuation and slag droplets entrainment in a continuous casting mold based on VOF-les method

Zhao, P., Li, Q., Kuang, S. B. & Zou, Z., 24 May 2017, In : High Temperature Materials and Processes. 36, 5, p. 551-565 15 p.

Research output: Contribution to journalArticleResearchpeer-review

Micromechanical modeling and analysis of pneumatic conveying

Kuang, S. B. & Yu, A. B., 2013, ICBMH 2013 - 11th International Conference on Bulk Materials Storage, Handling and Transportation. Barton ACT Australia: Engineers Australia, 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Micromechanic modeling and analysis of the flow regimes in horizontal pneumatic conveying

Kuang, S. & Yu, A., 2011, In : AIChE Journal. 57, 10, p. 2708 - 2725 18 p.

Research output: Contribution to journalArticleResearchpeer-review

Microstructure and wear resistance of a novel Mo-Ni-Si system intermetallic composite with ductile Mo phase

Song, C., Gui, Y., Kuang, S., Wang, S. & Zhao, D., 8 Apr 2016, In : Materials Transactions. 57, 5, p. 721-725 5 p.

Research output: Contribution to journalArticleResearchpeer-review

Model A vs. Model B in the modelling of particle-fluid flow

Chu, K. W., Kuang, S. B., Zhou, Z. Y. & Yu, A. B., 15 Apr 2018, In : Powder Technology. 329, p. 47-54 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Modeling of the variations of permeate flux, concentration polarization, and solute rejection in nanofiltration system

Zhang, Y., Zhang, L., Hou, L., Kuang, S. & Yu, A., Mar 2019, In : AIChE Journal. 65, 3, p. 1076-1087 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Modelling the multiphase flow in hydrocyclones using Coarse-grained VOF-DEM and Mixture-DEM approaches

Ji, L., Chu, K., Kuang, S., Chen, J. & Yu, A., 2018, In : Industrial and Engineering Chemistry Research. 57, 29, p. 9641–9655 15 p.

Research output: Contribution to journalArticleResearchpeer-review

Numerical analysis of hydrocyclones with different conical section designs

Ghodrat, M., Kuang, S., Yu, A., Vince, A., Barnett, G. D. & Barnett, P. J., 2014, In : Minerals Engineering. 62, p. 74-84 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Numerical analysis of hydrocyclones with different vortex finder configurations

Ghodrat, M., Kuang, S. B., Yu, A. B., Vince, A., Barnett, G. D. & Barnett, P. J., 2014, In : Minerals Engineering. 63, p. 125-138 14 p.

Research output: Contribution to journalArticleResearchpeer-review

Numerical investigation of burden distribution in ironmaking blast furnace

Li, Z., Kuang, S., Liu, S., Gan, J., Yu, A., Li, Y. & Mao, X., 15 Jul 2019, In : Powder Technology. 353, p. 385-397 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Numerical Investigation of Gas-Liquid Flow in a Newly Developed Carbonation Reactor

Li, R., Kuang, S., Zhang, T., Liu, Y. & Yu, A., 10 Jan 2018, In : Industrial and Engineering Chemistry Research. 57, 1, p. 380-391 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Numerical Investigation of Novel Oxygen Blast Furnace Ironmaking Processes

Li, Z., Kuang, S., Yu, A., Gao, J., Qi, Y., Yan, D., Li, Y. & Mao, X., 1 Aug 2018, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 49, 4, p. 1995–2010 16 p.

Research output: Contribution to journalArticleResearchpeer-review

Numerical investigation of the separation behaviours of fine particles in large dense medium cyclones

Qi, Z., Kuang, S. B. & Yu, A. B., 10 Sep 2015, In : International Journal of Mineral Processing. 142, p. 35-45 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Numerical simulation of non-axisymmetrical flows in cylindrical metallurgical reaction vessels

Kuang, S. B., Zou, Z. S., Yu, A. B. & Li, H., 1 Jul 2006, In : Journal of Iron and Steel Research. 18, 7, p. 20-24 5 p.

Research output: Contribution to journalArticleResearchpeer-review

Numerical simulation of the in-line pressure jig unit in coal preparation

Dong, K. J., Kuang, S., Vince, A., Hughes, T. & Yu, A., 2010, In : Minerals Engineering. 23, 4, p. 301 - 312 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Numerical study of horizontal pneumatic conveying: Effect of material properties

Li, K., Kuang, S. B., Pan, R. H. & Yu, A. B., 2014, In : Powder Technology. 251, p. 15 - 24 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Numerical study of hot charge operation in ironmaking blast furnace

Kuang, S. B., Li, Z. Y., Yan, D. L., Qi, Y. H. & Yu, A. B., 2014, Minerals Engineering. Elsevier, Vol. 63. p. 45-56 12 p. (Minerals Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Numerical study of jet-induced cratering of a granular bed: Effect of gravity

Kuang, S., LaMarche, C. Q., Curtis, J. S. & Yu, A., 2013, Powders and Grains 2013: Proceedings of the 7th International Conference on Micromechanics of Granular Media. Yu, A., Dong, K., Yang, R. & Luding, S. (eds.). Melville NY USA: American Institute of Physics, Vol. 1542. p. 1162 - 1165 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Numerical study of liquid-gas-solid flow in classifying hydrocyclones: Effect of feed solids concentration

Kuang, S., Chu, K., Yu, A. & Vince, A., 2012, In : Minerals Engineering. 31, p. 17 - 31 15 p.

Research output: Contribution to journalArticleResearchpeer-review