Raman Singh

Professor

Accepting PhD Students

1986 …2020
If you made any changes in Pure these will be visible here soon.

Research Output 1986 2020

Filter
Conference Paper
2018

A simulation study of terahertz dielectric resonator using graphitic carbon nitride

Memon, U. B., Ibrahim, A., Pattanayak, A., Duttagupta, S. P., Sarkar, A. & Singh Raman, R. K., 5 Jul 2018, MIKON 2018 - 22nd International Microwave and Radar Conference. IEEE, Institute of Electrical and Electronics Engineers, p. 722-725 4 p. (MIKON 2018 - 22nd International Microwave and Radar Conference).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

2016

Appropriate corrosion-fatigue testing of magnesium alloys for temporary bioimplant applications

Harandi, S. E. & Singh Raman, R. K., 2016, TMS 2016: Proceedings of the Magnesium Technology Symposium held at the 145th TMS Annual Meeting & Exhibition: Nashville, Tennessee; February 14-18, 2016. Singh, A., Solanki, K., Manuel, M. V. & Neelameggham, N. R. (eds.). Hoboken NJ USA: John Wiley & Sons, p. 353-356 4 p. (Magnesium Technology; vol. 2016).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Compression tests on seawater and sea sand concrete (SWSSC) filled stainless steel, CFRP and BFRP tubular stub columns

Li, Y. L., Zhao, X. L., Raman, R. K. S. & Al-Saadi, S., 1 Jan 2016, Proceedings of the 8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, CICE 2016. Dai, J. G. & Teng, J. G. (eds.). The Hong Kong Polytechnic University, p. 270-276 7 p. (Proceedings of the 8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, CICE 2016).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

3 Citations (Scopus)

Development of self-healing coatings using encapsulated linseed oil and tung oil as healing agents

Thanawala, K., Khanna, A. S. & Singh Raman, R. K., 1 Jan 2016, Corrosion Conference and Expo 2016: Vancouver, Canada; 6-10 March 2016. Houston TX USA: NACE International, Vol. 2. p. 1489-1497 9 p. 7310. (NACE - International Corrosion Conference Series).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Graphene for durable corrosion resistance: current status and challenges

Singh Raman, R. K., 1 Jan 2016, Corrosion and Prevention 2016. Australasian Corrosion Association, (Corrosion and Prevention 2016; vol. 2016-November).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Tensile properties of basalt-fibre reinforced polymer (BFRP) bars within seawater and sea sand concrete environment

Wang, Z. K., Zhao, X. L., Xian, G. J., Wu, G., Singh Raman, R. K. & Al-Saadi, S., 1 Jan 2016, Proceedings of the 8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, CICE 2016. Dai, J. G. & Teng, J. G. (eds.). The Hong Kong Polytechnic University, p. 791-796 6 p. (Proceedings of the 8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, CICE 2016).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

3 Citations (Scopus)

Understanding corrosion-assisted cracking of magnesium alloys for bioimplant applications

Singh Raman, R. K. & Harandi, S. E., 2016, TMS 2016: Proceedings of the Magnesium Technology Symposium held at the 145th TMS Annual Meeting & Exhibition: Nashville, Tennessee; February 14-18, 2016. Singh, A., Solanki, K., Manuel, M. V. & Neelameggham, N. R. (eds.). John Wiley & Sons, Vol. Hoboken NJ USA. p. 343-346 4 p. (Magnesium Technology; vol. 2016).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2015

Bond durability of fatigued CFRP/steel double lap joints protected with chemical silane exposed to marine environments

Borrie, D., Zhao, X. L., Singh, R. R. K. & Bai, Y., 2015, Joint Conference of the 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & the 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015). Wu, Z., Wu, G. & Wang, X. (eds.). Nanjing China: Southeast University, p. 1 - 6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

CFRP strengthened pre-cracked steel plates protected with chemical silane exposed to extreme marine environments

Borrie, D., Zhao, X. L., Singh, R. R. K. & Bai, Y., 2015, Joint Conference of the 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & the 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015). Wu, Z., Wu, G. & Wang, X. (eds.). Nanjing China: Southeast University, p. 1 - 6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Corrosion and assisted cracking of magnesium alloys in bioimplant applications: Challenges and opportunities

Singh Raman, R. K. & Harandi, S. E., 2015, Australasian Corrosion Association Annual Conference: Corrosion and Prevention 2015, ACA 2015: Adelaide, Australia; 15-18 November 2015. Kerrimuir VIC Australia: Australasian Corrosion Association, p. 1-9 9 p. 112

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

15 Citations (Scopus)

Crack growth from naturally occurring material discontinuities in operational aircraft

Jones, R., Peng, D., Huang, P. & Singh, R. R. K., 2015, Procedia Engineering: 3rd International Conference on Material and Component Performance under Variable Amplitude Loading, VAL 2015. Papuga, J. & Ruzicka, M. (eds.). Amsterdam Netherlands: Elsevier, Vol. 101. p. 227 - 234 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Open Access
File
1 Citation (Scopus)

Development of biodegradable coating for controlled dissolution of a magnesium alloy as an implant

Gaur, S., Khanna, A. S. & Singh, R. K., 2015, Materials Science Forum: Light Metals Technology 2015. Chikwanda, H. K. & Chikosha, S. (eds.). Pfaffikon Switzerland: Trans Tech Publications, Vol. 828-829. p. 321 - 326 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Preliminary study on durability of FRP and stainless steel in seawater and sea sand concrete (SWSSC) environment

Guo, F., Khoo, W., Al-Saadi, S. H. M., Li, Y., Singh, R. R. K. & Zhao, X. L., 2015, Proceedings of the 11th International Conference on Advances in Steel-Concrete Composite Structures (ASCCS 2015). Han, L-H., Li, W. & Lam, D. (eds.). Beijing China: Tsinghua University Press, p. 1 - 8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2 Citations (Scopus)

Smart anti-corrosive self-healing coatings using halloysite nanotubes as host for entrapment of corrosion inhibitors

Thanawala, K., Khanna, A. S., Raman, R. K. S. & Bohm, S., 1 Jan 2015, Australasian Corrosion Association Annual Conference: Corrosion and Prevention 2015, ACA 2015: Adelaide, Australia; 15-18 November 2015. Kerrimuir VIC Australia: Australasian Corrosion Association (ACA), p. 1-7 7 p. 017

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Tests of seawater and sea sand concrete (SWSSC) filled stainless steel (SS) and GFRP tubes

Li, Y., Zhang, Y., Nie, R., Zhao, X. L., Singh, R. R. K., Al-Saadi, S. H. M. & Teng, J-G., 2015, Proceedings of the 11th International Conference on Advances in Steel-Concrete Composite Structures (ASCCS 2015). Han, L-H., Li, W. & Lam, D. (eds.). Beijing China: Tsinghua University Press, p. 1 - 7 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2014
2 Citations (Scopus)

Corrosion fatigue behaviour of a common AZ91D magnesium alloy in modified simulated body fluid

Jafari, S. & Singh, R. R. K., 2014, Advanced Materials Research: 11th International Fatigue Congress (FATIGUE 2014). Clark, G. & Wang, C. H. (eds.). Pfaffikon Switzerland: Trans Tech Publications, Vol. 891-982. p. 267 - 272 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Evaluation of bonding between high modulus CFRP sheet and steel after environmental exposure and fatigue loading

Liu, H., Borrie, D., Zhao, X. L., Bai, Y. & Singh, R. R. K., 2014, Advanced Materials Research: 11th International Fatigue Congress (FATIGUE 2014). Clark, G. & Wang, C. H. (eds.). Pfaffikon Switzerland: Trans Tech Publications, Vol. 891-892. p. 143 - 148 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Nanocrystalline alloy structure and ultra-thin graphene coating: The novel nanotechnologies for remarakable oxidation / corrosion resistance

Singh, R. R. K., 2014, Proceedings of Corrosion and Prevention 2014. Gamboa, E. (ed.). Australia: Australian Corrosion Association, p. 1 - 8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2013

Investigation of corrosion fatigue of Magnesium alloys for biodegradable implant applications

Jafari, S., Singh, R. R. K. & Davies, C. H. J., 2013, Corrosion & Prevention 2013. Carroll, F. (ed.). Australia: Australasian Corrosion Association, p. 497-502 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOtherpeer-review

Multilayer graphene coating on Copper for corrosion mitigation

Tiwari, A. & Singh, R. R. K., 2013, Corrosion & Prevention 2013. Carroll, F. (ed.). Australia: Australasian Corrosion Association, p. 1 - 7 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Quantifying corrosion caused by extreme weathering between carbon fibre reinforced polymers (CFRP) and steel

Borrie, D., Adnan, N., Singh, R. R. K. & Zhao, X-L., 2013, Fourth Asia-Pacific Conference on FRP in Structures (APFIS 2013). Al-Mahaidi, R., Smith, S. T., Bai, Y. & Zhao, X-L. (eds.). Ontario Canada: International Institute for FRP in Construction, p. 1 - 6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2012

Bond tests of high modulus CFRP/steel double-strap joints at elevated temperatures

Liu, H., Zhao, X. L., Bai, Y., Singh, R. R. K., Rizalla, S. & Bandyopadhyay, S., 2012, Proceedings of the 6th International Composites Conference (ACUN-6) Composite and Nanocomposites in Civil, Offshore and Mining Infrastructure. Bai, Y., Bandyopadhyay, S., Zhao, X. L., Singh, R. & Rizkalla, S. (eds.). Sydney NSW Australia: Monash University Publishing, p. 139 - 146 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

CVD graphene on metals for remarkable corrosion resistance

Tiwari, A., Chakraborty Banerjee, P., Singh, R. R. K. & Majumder, M., 2012, Corrosion & Prevention 2012. Birbilis, N., Hinton, B. & Campbell, N. (eds.). Kerrimuir Vic Australia: Australasian Corrosion Association, p. 1 - 7 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

High temperature oxidation behaviour of 2.25%Cr and 9%Cr boiler steels in laboratory and plant steam environments

Czerwinski, A. & Singh, R. R. K., 2012, Corrosion & Prevention 2012. Birbilis, N., Hinton, B. & Campbell, N. (eds.). Kerrimuir Vic Australia: Australasian Corrosion Association, p. 1 - 9 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Influence of sulphate reducing bacteria in stress corrosion cracking of mild steel in aqueous solutions

Patil, S., Choudhary, L. K. & Singh, R. R. K., 2012, Corrosion & Prevention 2012. Birbilis, N., Hinton, B. & Campbell, N. (eds.). Kerrimuir Vic Australia: Australasian Corrosion Association, p. 1 - 5 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

In-vitro evaluation of stress corrosion cracking behaviour of ZX50 magnesium alloy in a simulated body fluid

Choudhary, L. K., Singh, R. R. K., Hofstetter, J. & Uggowitzer, P., 2012, Corrosion & Prevention 2012. Birbilis, N., Hinton, B. & Campbell, N. (eds.). Kerrimuir Vic Australia: Australasian Corrosion Association, p. 1 - 6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Oxidation resistance of bimodal Fe-Cr alloys having controlled dispersion of microcrystalline grains in a nanocrystalline matrix

Brahmadesham Venkataraman, M., Singh, R. R. K., Koch, C. C., Joardar, J. & Joshi, S. V., 2012, Corrosion & Prevention 2012. Birbilis, N., Hinton, B. & Campbell, N. (eds.). Kerrimuir Vic Australia: Australasian Corrosion Association, p. 1 - 8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Role of bacteria in corrosion and assisted cracking of mild steel: A review

Majumder, A. & Singh, R. R. K., 2012, Corrosion & Prevention 2012. Birbilis, N., Hinton, B. & Campbell, N. (eds.). Kerrimuir Vic Australia: Australasian Corrosion Association, p. 1 - 9 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Role of biofilms of sulfate reducing bacteria in electrochemical corrosion of steel

Welikala, S., Singh, R. R. K., Gates, W. & Panter, C., 2012, Corrosion & Prevention 2012. Birbilis, N., Hinton, B. & Campbell, N. (eds.). Kerrimuir Vic Australia: Australasian Corrosion Association, p. 1 - 10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Silane coating for the corrosion protection of a magnesium alloy ZE41

Chakraborty Banerjee, P., Singh, R. R. K., Durandet, Y. & McAdam, G., 2012, Corrosion & Prevention 2012. Birbilis, N., Hinton, B. & Campbell, N. (eds.). Kerrimuir Vic Australia: Australasian Corrosion Association, p. 1 - 7 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Stress corrosion cracking of a twinning induced plasticity (TWIP) steel

Khalissi, M. M., Singh, R. R. K., Khoddam, S. & Fang, X-Y., 2012, Corrosion & Prevention 2012. Birbilis, N., Hinton, B. & Campbell, N. (eds.). Kerrimuir Vic Australia: Australasian Corrosion Association, p. 1 - 11 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Stress corrosion cracking of Rare-Earth containing magnesium alloy EV31A compared with AZ91E using slow strain rate test

Padekar, B. S., Singh, R. R. K., Raja, V. S. & Lyon, P., 2012, Proceedings of NACE International Corrosion 2012 Conference & Expo. Moghissi, O. (ed.). Houston TX USA: National Association of Corrosion Engineer (NACE), p. 4470 - 4478 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOtherpeer-review

2011

Deposition and in-vitro degradation of calcium phosphate coating on a magnesium alloy

Choudhary, L., Singh, R. & Nie, J., 2011, Proceedings of the 18th International Corrosion Congress. Holloway, L. (ed.). Melbourne Vic Australia: Australasian Corrosion Association, p. 1 - 8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Effect of Cr and Zr addition on oxidation resistance of nanocrystalline Fe-Cr-Ni-Zr

Brahmadesham Venkataraman, M., Singh, R., Atanacio, A., Fu, J. & Koch, C., 2011, Proceedings of the 18th International Corrosion Congress. Holloway, L. (ed.). Melbourne Vic Australia: Australasian Corrosion Association, p. 1 - 7 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Influence of laser parameters on microstructure and corrosion kinetics of laser treated ZE41

Chakraborty Banerjee, P., Singh, R., Durandet, Y. & McAdam, G., 2011, Proceedings of the 18th International Corrosion Congress. Holloway, L. (ed.). Melbourne Vic Australia: Australasian Corrosion Association, p. 1 - 4 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOtherpeer-review

Influence of laser processing parameters on microstructure and corrosion of laser surface melted ZE41 magnesium alloy

Chakraborty Banerjee, P., Singh, R., Durandet, Y. & McAdam, G., 2011, Materials Science Forum - Light Metals Technology V. Dieringa, H., Hort, N. & Ulrich Kainer, K. (eds.). Switzerland: Trans Tech Publications, Vol. 690. p. 401 - 404 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOtherpeer-review

21 Citations (Scopus)

Investigations into stress corrosion cracking behaviour of AZ91D magnesium alloy in physiological environment

Choudhary, L., Szmerling, J., Goldwasser, R. & Singh, R., 2011, Procedia Engineering. Guagliano, M. (ed.). Amsterdam Netherlands: Elsevier, Vol. 10. p. 518 - 523 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

8 Citations (Scopus)

Stress corrosion cracking of a new rare-earth containing magnesium alloy, Elektron21 compared with AZ91E

Padekar, B., Raja, V., Singh, R. & Lyon, P., 2011, Materials Science Forum - Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Switzerland: Trans Tech Publications, Vol. 690. p. 361 - 364 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOtherpeer-review

2 Citations (Scopus)

Threshold stress intensity for stress corrosion cracking (Kiscc) of a magnesium alloy in physiological environment

Choudhary, L. & Singh, R., 2011, Materials Science Forum - Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Switzerland: Trans Tech Publications, Vol. 690. p. 487 - 490 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Two step silane coating for corrosion resistance of steel

Al-Saadi, S. & Singh, R., 2011, Proceedings of the 18th International Corrosion Congress. Holloway, L. (ed.). Melbourne Vic Australia: Australasian Corrosion Association, p. 1 - 10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2010

Corrosion Resistance of Nanobainitic Steel

Mason, D., Ozberk, E., Singh, R., Khoddam, S., Al-Saadi, S. & Beladi, H., 2010, Corrosion & Prevention 2010. Brown, K., Gamboa, E. & Vice, P. (eds.). Victoria: Australasian Corrosion Association, p. 1 - 6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2 Citations (Scopus)

Effect of milling time on properties of mechanochemically synthesized nano ZnO

Nursyahadah, M. Z., Zakaria, A., Singh, R. R. K., Venugopal, T. & Talari, M. K., 2010, Progress of Physics Research in Malaysia (AIP Conference Proceedings). Yahya, A. K. (ed.). USA: American Institute of Physics, Vol. 1250. p. 440 - 443 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Influence of pH of deposition of n-octadecyltrimethoxy silane coating on the corrosion resistance of a magnesium alloy

Chakraborty Banerjee, P., Singh Raman, R. K., Durandet, Y. & McAdam, G., 1 Dec 2010, 50th Annual Conference of the Australasian Corrosion Association 2010: Corrosion and Prevention 2010. p. 725-732 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Influence of pH of n-octadecyltrimethoxy silane coating on the corrosion resistance of ZE41 magnesium alloy

Chakraborty Banerjee, P., Singh, R., Durandet, Y. & McAdam, G., 2010, Corrosion & Prevention 2010. Brown, K., Gamboa, E. & Vice, P. (eds.). Australia: Australasian Corrosion Association, p. 1 - 8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)

Processing and electrochemical corrosion resistance of a nanocrystalline Fe-20Cr alloy

Gupta, R. K., Raman, R. K. S. & Koch, C., 2010, TMS 2010 - 139th Annual Meeting and Exhibition - Supplemental Proceedings. Vol. 1. p. 703-710 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Processing and excellent oxidation resistance of nanaocrystalline Fe-Cr Alloys

Gupta, R., Brahmadesham Venkataraman, M., Singh, R. & Koch, C., 2010, Materials Science Forum. Nie, J-F. & Morton, A. (eds.). Stafa-Zurich Switzerland: Trans Tech Publications, Vol. 654-656. p. 1122 - 1125 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Processing and oxidation resistance of nanocrystalline Fe-10Cr alloy

Gupta, R. K., Raman, R. K. S. & Koch, C., 2010, TMS 2010 - 139th Annual Meeting and Exhibition - Supplemental Proceedings. Vol. 2. p. 781-786 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)

Studies on the degree of sensitization of welded 2507 super duplex stainless steel using a modified DL-EPR test

Basiouni, M., Ward, L., Singh, R., O'Mullane, A., Gideon, B. & Bhargava, S., 2010, Corrosion & Prevention 2010. Brown, K., Gamboa, E. & Vice, P. (eds.). Australia: Australasian Corrosion Association, p. 1 - 12 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)

Study on the microstructural changes and impact on the pitting corrosion behaviour of 2507 duplex stainless steel weld regions

Bassiouni, M., Ward, L. P., Singh Raman, R. K., O'Mullane, A. P. & Gideon, B., 2010, 50th Annual Conference of the Australasian Corrosion Association 2010: Corrosion and Prevention 2010. p. 355-364 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2009

A novel fracture mechanics approach to determine the threshold stress intensity factor in corrosive environment

Pal, S. S., Singh, R. R. K. & Ibrahim, R. N., 2009, 12th Int Conference on Fracture. Elboujdaini, M. (ed.). Ottawa: Association for Information Systems, p. 1 - 14 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review