1986 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2009

Stress corrosion cracking of mild steel in caustic solutions

Pal, S. S., Singh, R. R. K. & Ibrahim, R. N., 2009, Corrosion & Prevention 2009: The Management of Infrastructure Deterioration. Dockrill, B. (ed.). Kerrimuir Victoria: Australasian Corrosion Association, p. 1 - 7 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Using Thermomechanical Conditioning Cycles to Improve Fracture Toughness of Low Carbon Steel

Wu, F. W., Ibrahim, R. N., Singh, R. R. K. & Das, R., 2009, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 40, 5, p. 1118 - 1125 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Weld Cracking in Ferrous Alloys

Singh, R. R. K., 2009, UK: Woodhead Publishing Limited. 560 p.

Research output: Book/ReportEdited BookOther

1 Citation (Scopus)
2008

Advances in Generation of Design Data for stress corrosion Cracking

Singh, R. R. K., 2008, Corrosion Science and Technology Mechanism, Mitigation and Monitoring. Mudali, U. K. & Jar, B. (eds.). First ed. New Delhi, India: Narosa Publishing House, p. 122 - 137 16 p.

Research output: Chapter in Book/Report/Conference proceedingChapter (Book)Researchpeer-review

Advances in techniques for determination of susceptibility of welds to stress corrosion cracking (KISCC)

Singh, R. K., 1 Dec 2008, Weld Cracking in Ferrous Alloys. Academic Press, p. 521-533 13 p.

Research output: Chapter in Book/Report/Conference proceedingChapter (Book)Researchpeer-review

1 Citation (Scopus)

Circumferential notch tensile tests for determination of KISCC, using small fracture mechanics specimens

Rihan, R. O., Singh, R. R. K. & Ibrahim, R. N., 2008, Environment-Induced cracking of Materials Prediction, Industrial Developments and Evaluation. Shipilov, S. A., Jones, R. H., Olive, J. M. & Rebak, R. B. (eds.). First ed. Oxford, UK: Elsevier, p. 459 - 469 11 p.

Research output: Chapter in Book/Report/Conference proceedingChapter (Book)Researchpeer-review

Comparative studies on the corrosion properties of a Fe-Mn-Al-Si steel and an interstitial-free steel

Mathan, B. K., Singh, R. R. K. & Khoddam, S., 2008, In : Corrosion Science. 50, 10, p. 2879 - 2884 6 p.

Research output: Contribution to journalArticleResearchpeer-review

49 Citations (Scopus)

Corrosion of 2205 Duplex Stainless Steel Weldment in Chloride Medium Containing Sulfate-Reducing Bacteria

Antony, P. J., Singh, R. R. K., Kumar, P. & Raman, R., 2008, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 39, 11, p. 2689 - 2697 9 p.

Research output: Contribution to journalArticleResearchpeer-review

22 Citations (Scopus)

Corrosion of Magnesium Alloy AZ91D: An SVET based study

Saxena, A., Singh, R. R. K., Tamilselvi, M., Ramu, S., Shukla, A., Brandt, M. & Furman, S. A., 2008, Proceeding of Corrosion and Prevention 08. Duncan, J. (ed.). Kerrimuir, Victoria: Australasian Corrosion Association, p. 062 -1 - 062 - 6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Determination of threshold stress intensity factor (KISCC) of simulated HAZ in caustic solution using circumferential notch tensile technique

Pal, S. S., Singh, R. R. K. & Ibrahim, R. N., 2008, Proceeding of Corrosion and Prevention, 08. Duncan, J. (ed.). Kerrimuir, Victoria: Australasian Corrosion Association, p. 01 - 08 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Development of spiral notch torsion test: A new fracture mechanics approach to determination of KISCC

Singh Raman, R. K., Bayles, R., Knight, S. P., Wang, J. A., Hinton, B. R. W. & Muddle, B. C., 1 Dec 2008, Environment-Induced Cracking of Materials. Academic Press, p. 471-481 11 p.

Research output: Chapter in Book/Report/Conference proceedingChapter (Book)Researchpeer-review

1 Citation (Scopus)

Development of spiral notch torsion test: a new fracture mechanics approached to determination of Kiscc

Singh, R. R. K., Bayles, R. A., Knight, S. P., Wang, J-A. J., Hinton, B. R. W. & Muddle, B. C., 2008, Environment-Induced cracking of Materials Prediction, Industrial Developments and Evaluation. Shipilov, S. A., Jones, R. H., Olive, J. M. & Rebak, R. B. (eds.). First ed. Oxford, UK: Elsevier, p. 471 - 481 11 p.

Research output: Chapter in Book/Report/Conference proceedingChapter (Book)Researchpeer-review

Evaluating the stress corrosion cracking susceptibility of Mg-Al-Zn alloy in modified-simulated body fluid for orthopaedic implant application

Mathan, B. K. & Singh, R. R. K., 2008, In : Scripta Materialia. 59, 2, p. 175 - 178 4 p.

Research output: Contribution to journalArticleResearchpeer-review

69 Citations (Scopus)

Grain growth behaviour and consolddation of ball milled nanocrystalline iron-chromium alloys

Gupta, R. K., Raman, R. K. S. & Koch, C. C., 21 Oct 2008, TMS2008 - 137th Annual Meeting and Exhibition Supplemental Proceedings: Materials Processing and Properties. p. 151-157 7 p. (TMS Annual Meeting; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

3 Citations (Scopus)

Grain growth behaviour and consolidation of ball-milled nanocrystalline Fe-10Cr alloy

Gupta, R. K., Singh, R. R. K. & Koch, C. C., 2008, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 494, 4-2, p. 253 - 256 4 p.

Research output: Contribution to journalArticleResearchpeer-review

28 Citations (Scopus)

Influence of thermal aging on sulfate-reducing bacteria (SRB)-influenced corrosion behaviour of 2205 duplex stainless steel

Antony, P. J., Singh, R. R. K., Mohanram, R., Kumar, P. & Raman, R., 2008, In : Corrosion Science. 50, 7, p. 1858 - 1864 7 p.

Research output: Contribution to journalArticleResearchpeer-review

61 Citations (Scopus)

Introduction

Singh, R. K., 1 Dec 2008, Weld Cracking in Ferrous Alloys. Academic Press

Research output: Chapter in Book/Report/Conference proceedingForeword / PostscriptOtherpeer-review

In vitro degradation and mechanical integrity of calcium-containing magnesium alloys in modified-simulated body fluid

Mathan, B. K. & Singh, R. R. K., 2008, In : Biomaterials. 29, 15, p. 2306 - 2314 9 p.

Research output: Contribution to journalArticleResearchpeer-review

392 Citations (Scopus)

ISCCKCircumferential notch tensile (CNT) tests for determination of, using small fracture mechanics specimens

Rihan, R., Singh Raman, R. K. & Ibrahim, R. N., 1 Dec 2008, Environment-Induced Cracking of Materials. Academic Press, p. 459-469 11 p.

Research output: Chapter in Book/Report/Conference proceedingChapter (Book)Researchpeer-review

5 Citations (Scopus)

Laser assisted surface modification of AZ91 alloy: Microstructural and electrochemical study

Saxena, A., Singh Raman, R. K. & Bobby Kannan, M., 1 Apr 2008, In : Transactions of the Indian Institute of Metals. 61, 2-3, p. 121-124 4 p.

Research output: Contribution to journalArticleResearchpeer-review

Low temperature oxidation of nanocystalline vis-à-vis microcrystalline Fe-Cr alloys

Singh Raman, R. K., Gupta, R. K. & Koch, C. C., 1 Dec 2008, 17th International Corrosion Congress 2008: Corrosion Control in the Service of Society. p. 3262-3269 8 p. (17th International Corrosion Congress 2008: Corrosion Control in the Service of Society; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

MIC of Steels by Iron Reducing Bacteria

Videla, H. A., Le Borgne, S., Panter, C. & Singh, R. R. K., 2008, Proc CORROSION 2008. USA: National Association of Corrosion Engineer (NACE), p. 1 - 10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

6 Citations (Scopus)

Polarisation behavior of twinning induced plasticity (TWIP) steel

Bobby Kannan, M., Bakshi, A., Singh Raman, R. K. & Khoddam, S., 1 Dec 2008, 48th Annual Conference of the Australasian Corrosion Association 2008: Corrosion and Prevention 2008. p. 555-558 4 p. (48th Annual Conference of the Australasian Corrosion Association 2008: Corrosion and Prevention 2008).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Polarisation Behavior of Twinning Induced Plasticty (TWIP) Steel

Mathan, B. K., Bakshi, A., Singh, R. R. K. & Khoddam, S., 2008, Proceeding of Corrosion and Prevention 08. Duncan, J. (ed.). Kerrimuir, Victoria: Australasian Corrosion Association, p. 01 - 04 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Role of Micro-/Nanocrystalline Structure in Oxidation of Fe-Cr Alloys

Singh, R. R. K., Gupta, R. K., Atanacio, A. J. & Koch, C. C., 2008, Proceedings of Corrosion and Prevention 08. Duncan, J. (ed.). Kerrimuir, Victoria: Australasian Corrosion Association, p. 1 - 7 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Role of Minor Compositional Variation in Oxidation of 'Cr-Mo' Steels

Singh, R. & Al-Mazrouee, A., 2008, Proceedings from the Fifth International Conference - Advances in Materials Technology for Fossil Power Plants. Viswanathan, R., Gandy, D. & Coleman, K. (eds.). 1 ed. USA: ASM International, p. 544 - 550 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Stress Corrosion Cracking Behaviour of Biodegradable Magnesium-Based Alloy in Simulated Physiological Condition

Mathan, B. K. & Singh, R. R. K., 2008, Proceeding of Corrosion and Preventio 08. Duncan, J. (ed.). Kerrimuir, Victoria: Australasian Corrosion Association, p. 01 - 04 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Two-step linear elastic finite element analysis: A new approach for evaluating fracture toughness for CNT specimens

Ibrahim, R. N., Das, R., Wu, F. W. & Singh, R. R. K., 2008, In : International Journal of Materials and Structural Integrity (IJMSI). 2, 4, p. 319 - 331 13 p.

Research output: Contribution to journalArticleResearchpeer-review

2007

Biodegradable Magnesium Alloys As Orthopaedic Implant

Mathan, B. K., Moore, J. & Singh, R. R. K., 2007, Corrosion Control 2007. Ali, M. (ed.). Australia: Corrosion Association, p. 1 - 5 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Circumferential notch tensile testing

Singh, R. R. K., Rihan, R. O. & Ibrahim, R. N., 2007, In : Journal of the Electrochemical Society. 154, 11, p. 658 - 662 5 p.

Research output: Contribution to journalArticleResearchpeer-review

9 Citations (Scopus)
6 Citations (Scopus)

High temperature oxidation of Cr-Mo steels in the context of accelerated rupture testing for creep life prediction

Al-Mazrouee, A. & Singh, R. R. K., 2007, In : Journal of Pressure Vessel Technology-Transactions of the Asme. 129, 3, p. 454 - 459 6 p.

Research output: Contribution to journalArticleResearchpeer-review

3 Citations (Scopus)

Hydrogen-induced-cracking in Magnesium Alloy Under Cathodic Polarization

Mathan, B. K., Dietzel, W., Singh, R. R. K. & Lyon, P., 2007, In : Scripta Materialia. 57, 7, p. 579 - 581 3 p.

Research output: Contribution to journalArticleResearchpeer-review

51 Citations (Scopus)

Influence of sulfate-reducing bacteria on corrosion of 2205-type duplex stainless steel in chloride medium

Antony, P. J., Singh Raman, R. K., Chongdar, S., Kumar, P. & Raman, R., 1 Dec 2007, 47th Annual Conference of the Australasian Corrosion Association 2007: Corrosion Control 2007. p. 511-517 7 p. (47th Annual Conference of the Australasian Corrosion Association 2007: Corrosion Control 2007).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Laser assisted modification of surface microstructure for localised corrosion resistance of magnesium alloys

Singh, R. R. K., Murray, S. J. & Brandt, M., 2007, In : Surface Engineering. 23, 2, p. 107 - 111 5 p.

Research output: Contribution to journalArticleResearchpeer-review

31 Citations (Scopus)

Microstructure and electrochemical behaviour of laser surface modified magnesium alloy AZ91

Saxena, A., Singh, R. R. K. & Brandt, M., 2007, Corrosion & Prevention. Ali, M. (ed.). Melbourne, Australia: Australasian Corrosion Association, p. 1 - 8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Role of imposed potential in expanding the regime of strain rates for caustic cracking

Singh, R. R. K. & Saxena, A., 2007, In : Journal of the Electrochemical Society. 154, 9, p. 451 - 457 7 p.

Research output: Contribution to journalArticleResearchpeer-review

3 Citations (Scopus)

Role of imposed potentials in threshold for caustic cracking susceptibility (KISCC): Investigations using circumferential notch tensile (CNT) testing

Singh, R. R. K., Rihan, R. O. & Ibrahim, R. N., 2007, In : Corrosion Science. 49, 12, p. 4386 - 4395 10 p.

Research output: Contribution to journalArticleResearchpeer-review

11 Citations (Scopus)

Surface Modification for Mitigation of Corrosion/Localised Corrosion of Magnesium Alloys

Singh, R. R. K., 2007, In : Surface Engineering. 23, 5, p. 319 - 323 5 p.

Research output: Contribution to journalArticleResearchpeer-review

1 Citation (Scopus)
22 Citations (Scopus)
2006

8th International Conference on Operating Pressure Equipment, Melbourne, Australia, 20-22 April, 2005

Price, J. W. H. & Singh, R. K., 1 May 2006, In : International Journal of Pressure Vessels and Piping. 83, 5, 1 p.

Research output: Contribution to journalEditorialOtherpeer-review

Characterisation of 'rolled-in', 'fragmented' and 'red' scale formation during secondary processing of steels

Singh, R. R. K., 2006, In : Engineering Failure Analysis. 13, 7, p. 1044 - 1050 7 p.

Research output: Contribution to journalArticleResearchpeer-review

13 Citations (Scopus)

Circumferential notched tensile (CNT) tests for generating KIscc data for cast iron vessels used in hot caustic solutions

Rihan, R. O., Singh, R. R. K. & Ibrahim, R. N., 2006, In : International Journal of Pressure Vessels and Piping. 83, 5, p. 388 - 393 6 p.

Research output: Contribution to journalArticleResearchpeer-review

16 Citations (Scopus)

Detection of decohesion/failure of paint/coating using electronic speckle pattern interferometry

Singh, R. R. K. & Bayles, R. A., 2006, In : Engineering Failure Analysis. 13, 7, p. 1051 - 1056 6 p.

Research output: Contribution to journalArticleResearchpeer-review

9 Citations (Scopus)

Determination of the threshold stress intensity factor (KISCC) of 4340 steel using small circumferential notched tensile (CNT) specimens

Rihan, R. O., Singh, R. R. K., Ibrahim, R. N. & Gerrard, D., 2006, Proceedings of Corrosion & Prevention 2006. McEwan, B. (ed.). Melbourne, Australia: Australasian Corrosion Association, p. 1 - 9 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review