1986 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2012

Synthesis, characterization and mechanical behaviour of an in situ consolidated nanocrystalline FeCrNi alloy

Gupta, R. K., Darling, K. S., Singh, R. R. K., Ravi, K. R., Koch, C. C., Budaraju, S. M. & Scattergood, R. O., 2012, In : Journal of Materials Science. 47, 3, p. 1562 - 1566 5 p.

Research output: Contribution to journalLetterResearchpeer-review

16 Citations (Scopus)

Twinning-assisted environmental cracking: A new fracture mechanism for the crash-resistant twinning-induced plasticity steels

Singh, R. R. K., Khalissi, M. M. & Khoddam, S., 2012, In : Scripta Materialia. 67, 12, p. 943 - 946 4 p.

Research output: Contribution to journalArticleResearchpeer-review

6 Citations (Scopus)

Deposition and in-vitro degradation of calcium phosphate coating on a magnesium alloy

Choudhary, L., Singh, R. & Nie, J., 2011, Proceedings of the 18th International Corrosion Congress. Holloway, L. (ed.). Melbourne Vic Australia: Australasian Corrosion Association, p. 1 - 8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Effect of Cr and Zr addition on oxidation resistance of nanocrystalline Fe-Cr-Ni-Zr

Brahmadesham Venkataraman, M., Singh, R., Atanacio, A., Fu, J. & Koch, C., 2011, Proceedings of the 18th International Corrosion Congress. Holloway, L. (ed.). Melbourne Vic Australia: Australasian Corrosion Association, p. 1 - 7 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

76 Citations (Scopus)

Electrochemical investigation of the influence of laser surface melting on the microstructure and corrosion behaviour of ZE41 magnesium alloy - An EIS based study

Chakraborty Banerjee, P., Singh, R., Durandet, Y. & McAdam, G., 2011, In : Corrosion Science. 53, 4, p. 1505 - 1514 10 p.

Research output: Contribution to journalArticleResearchpeer-review

52 Citations (Scopus)

Influence of circumferential notch and fatigue crack on the mechanical integrity of biodegradable magnesium-based alloy in simulated body fluid

Mathan, B., Singh, R., Witte, F., Blawert, C. & Dietzel, W., 2011, In : Journal of Biomedical Materials Research Part B: Applied Biomaterials. 96B, 2, p. 303 - 309 7 p.

Research output: Contribution to journalArticleResearchpeer-review

33 Citations (Scopus)

Influence of laser parameters on microstructure and corrosion kinetics of laser treated ZE41

Chakraborty Banerjee, P., Singh, R., Durandet, Y. & McAdam, G., 2011, Proceedings of the 18th International Corrosion Congress. Holloway, L. (ed.). Melbourne Vic Australia: Australasian Corrosion Association, p. 1 - 4 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOtherpeer-review

Influence of laser processing parameters on microstructure and corrosion of laser surface melted ZE41 magnesium alloy

Chakraborty Banerjee, P., Singh, R., Durandet, Y. & McAdam, G., 2011, Materials Science Forum - Light Metals Technology V. Dieringa, H., Hort, N. & Ulrich Kainer, K. (eds.). Switzerland: Trans Tech Publications, Vol. 690. p. 401 - 404 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOtherpeer-review

Investigations into stress corrosion cracking behaviour of AZ91D magnesium alloy in physiological environment

Choudhary, L., Szmerling, J., Goldwasser, R. & Singh, R., 2011, Procedia Engineering. Guagliano, M. (ed.). Amsterdam Netherlands: Elsevier, Vol. 10. p. 518 - 523 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

23 Citations (Scopus)

Modelling of mode-I stable crack growth under hydrogen assisted stress corrosion cracking

Raykar, N., Maiti, S. & Singh, R., 2011, In : Engineering Fracture Mechanics. 78, 18, p. 3153 - 3165 13 p.

Research output: Contribution to journalArticleResearchpeer-review

23 Citations (Scopus)

Role of oxide notching and degraded alloy microstructure in remarkably premature failure of steam generator tubes

Aimazeouee, A., Singh, R., Al-Fadhalah, K., Alardhi, M. & Alenezi, M., 2011, In : Engineering Failure Analysis. 18, 8, p. 2288 - 2295 8 p.

Research output: Contribution to journalArticleResearchpeer-review

7 Citations (Scopus)

Stress corrosion cracking (SCC) in low and medium strength carbon steels

Chatterjee, U. K. & Singh Raman, R. K., 2011, Stress corrosion cracking: Theory and practice. Raja, V. S. & Shoji, T. (eds.). 1st ed. Cambridge UK: Woodhead Publishing Limited, p. 169-198 30 p.

Research output: Chapter in Book/Report/Conference proceedingChapter (Book)Researchpeer-review

5 Citations (Scopus)

Stress corrosion cracking of a new rare-earth containing magnesium alloy, Elektron21 compared with AZ91E

Padekar, B., Raja, V., Singh, R. & Lyon, P., 2011, Materials Science Forum - Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Switzerland: Trans Tech Publications, Vol. 690. p. 361 - 364 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOtherpeer-review

9 Citations (Scopus)

Stress corrosion cracking of novel steel for automotive applications

Khalissi, M., Singh, R. & Khoddam, S., 2011, In : Procedia Engineering. 10, p. 3381 - 3386 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
7 Citations (Scopus)

Threshold stress intensity factor and crack growth rate for stress corrosion cracking of simulated heat affected zone in caustic solution

Pal, S., Ibrahim, R. & Singh, R., 2011, In : Engineering Fracture Mechanics. 78, 1, p. 13 - 26 14 p.

Research output: Contribution to journalArticleResearchpeer-review

9 Citations (Scopus)

Threshold stress intensity for stress corrosion cracking (Kiscc) of a magnesium alloy in physiological environment

Choudhary, L. & Singh, R., 2011, Materials Science Forum - Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Switzerland: Trans Tech Publications, Vol. 690. p. 487 - 490 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

3 Citations (Scopus)

Two step silane coating for corrosion resistance of steel

Al-Saadi, S. & Singh, R., 2011, Proceedings of the 18th International Corrosion Congress. Holloway, L. (ed.). Melbourne Vic Australia: Australasian Corrosion Association, p. 1 - 10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2010

A mechanistic study of in vitro degradation of magnesium alloy using electrochemical techniques

Mathan, B. K. & Singh, R. R. K., 2010, In : Journal of Biomedical Materials Research - Part A. 93, 3, p. 1050 - 1055 6 p.

Research output: Contribution to journalArticleResearchpeer-review

27 Citations (Scopus)

Chloride stress corrosion cracking of a super duplex stainless steel: role of nitrate addition

Singh, R. & Siew, W., 2010, Advances in Stainless Steels. Raj, B. & al, E. (eds.). India: Universities Press, p. 617 - 626 10 p.

Research output: Chapter in Book/Report/Conference proceedingChapter (Book)Researchpeer-review

Corrosion Resistance of Nanobainitic Steel

Mason, D., Ozberk, E., Singh, R., Khoddam, S., Al-Saadi, S. & Beladi, H., 2010, Corrosion & Prevention 2010. Brown, K., Gamboa, E. & Vice, P. (eds.). Victoria: Australasian Corrosion Association, p. 1 - 6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

8 Citations (Scopus)

Effect of milling time on properties of mechanochemically synthesized nano ZnO

Nursyahadah, M. Z., Zakaria, A., Singh, R. R. K., Venugopal, T. & Talari, M. K., 2010, Progress of Physics Research in Malaysia (AIP Conference Proceedings). Yahya, A. K. (ed.). USA: American Institute of Physics, Vol. 1250. p. 440 - 443 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2 Citations (Scopus)

Fabrication and oxidation resistance of nanocrystalline Fe10Cr alloy

Gupta, R., Singh, R. & Koch, C., 2010, In : Journal of Materials Science. 45, 17, p. 4884 - 4888 5 p.

Research output: Contribution to journalArticleResearchpeer-review

24 Citations (Scopus)

Influence of pH of deposition of n-octadecyltrimethoxy silane coating on the corrosion resistance of a magnesium alloy

Chakraborty Banerjee, P., Singh Raman, R. K., Durandet, Y. & McAdam, G., 1 Dec 2010, 50th Annual Conference of the Australasian Corrosion Association 2010: Corrosion and Prevention 2010. p. 725-732 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Influence of pH of n-octadecyltrimethoxy silane coating on the corrosion resistance of ZE41 magnesium alloy

Chakraborty Banerjee, P., Singh, R., Durandet, Y. & McAdam, G., 2010, Corrosion & Prevention 2010. Brown, K., Gamboa, E. & Vice, P. (eds.). Australia: Australasian Corrosion Association, p. 1 - 8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

3 Citations (Scopus)

Processing and electrochemical corrosion resistance of a nanocrystalline Fe-20Cr alloy

Gupta, R. K., Raman, R. K. S. & Koch, C., 2010, TMS 2010 - 139th Annual Meeting and Exhibition - Supplemental Proceedings. Vol. 1. p. 703-710 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)

Processing and excellent oxidation resistance of nanaocrystalline Fe-Cr Alloys

Gupta, R., Brahmadesham Venkataraman, M., Singh, R. & Koch, C., 2010, Materials Science Forum. Nie, J-F. & Morton, A. (eds.). Stafa-Zurich Switzerland: Trans Tech Publications, Vol. 654-656. p. 1122 - 1125 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Processing and oxidation resistance of nanocrystalline Fe-10Cr alloy

Gupta, R. K., Raman, R. K. S. & Koch, C., 2010, TMS 2010 - 139th Annual Meeting and Exhibition - Supplemental Proceedings. Vol. 2. p. 781-786 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Resistance of nanocrystalline vis-a-vis microcrystalline Fe-Cr alloys to environmental degradation and challenges to their synthesis

Singh, R., Gupta, R. & Koch, C., 2010, In : Philosophical Magazine. 90, 23, p. 3233 - 3260 28 p.

Research output: Contribution to journalArticleResearchpeer-review

25 Citations (Scopus)

Role of microstructure on corrosion of duplex stainless steel in presence of bacterial activity

Antony, P., Singh, R. R. K., Raman, R. & Kumar, P., 2010, In : Corrosion Science. 52, 4, p. 1404 - 1412 9 p.

Research output: Contribution to journalArticleResearchpeer-review

47 Citations (Scopus)

Role of nitrite addition in chloride stress corrosion cracking of a super duplex stainless steel

Singh, R. R. K. & Siew, W. H., 2010, In : Corrosion Science. 52, 1, p. 113 - 117 5 p.

Research output: Contribution to journalArticleResearchpeer-review

28 Citations (Scopus)

Studies on the degree of sensitization of welded 2507 super duplex stainless steel using a modified DL-EPR test

Basiouni, M., Ward, L., Singh, R., O'Mullane, A., Gideon, B. & Bhargava, S., 2010, Corrosion & Prevention 2010. Brown, K., Gamboa, E. & Vice, P. (eds.). Australia: Australasian Corrosion Association, p. 1 - 12 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)

Study on the microstructural changes and impact on the pitting corrosion behaviour of 2507 duplex stainless steel weld regions

Bassiouni, M., Ward, L. P., Singh Raman, R. K., O'Mullane, A. P. & Gideon, B., 2010, 50th Annual Conference of the Australasian Corrosion Association 2010: Corrosion and Prevention 2010. p. 355-364 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)
2009

Advances in Techniques for Determination of Threshold Stress Intensity for Stress Corrosion Cracking (KISCC) of Welds

Singh, R. R. K., 2009, Weld Cracking in Ferrous Alloys. Singh, R. (ed.). Cambridge, England, UK: Woodhead Publishing Limited, p. 521 - 533 13 p.

Research output: Chapter in Book/Report/Conference proceedingChapter (Book)Researchpeer-review

A Novel Fracture Mechanics Approach for Determination of Crack Growth Rate and Threshold for Caustic Cracking (KISCC) of Ferrous Alloys using Small Circumferential Notched Tensile (CNT) Specimens

Rihan, R. O., Singh, R. R. K. & Ibrahim, R. N., 2009, Pressure Vessels and Piping, Vol II: Materials and Properties. Raj, B., Choudhary, B. K. & Kumar, A. (eds.). New Delhi: Narosa Publishing House, p. 675 - 685 11 p.

Research output: Chapter in Book/Report/Conference proceedingChapter (Book)Researchpeer-review

A novel fracture mechanics approach to determine the threshold stress intensity factor in corrosive environment

Pal, S. S., Singh, R. R. K. & Ibrahim, R. N., 2009, 12th Int Conference on Fracture. Elboujdaini, M. (ed.). Ottawa: Association for Information Systems, p. 1 - 14 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Bis-1 2-(Triethoxysilyl) Ethane (BTSE) coating for magnesium alloys AZ91D and ZE41

Saxena, A., Chakraborty Banerjee, P. & Singh, R. R. K., 2009, Corrosion & Prevention 2009: The Management of Infrastructure Deterioration. Dockrill, B. (ed.). Kerrimuir Victoria: Australasian Corrosion Association, p. 1 - 10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Corrosion behavior of duplex stainless steels in marine media containing sulfate reducing bacteria: A laboratory study

Vargas-Avila, M. M., Singh, R. K., Panter, C., Cherry, B. W., Farinha, P. & Videla, H. A., 2009, Corrosion 2009: 22-26 March 2009, Atlanta, GA, United State [proceedings]. 14 p. (NACE - International Corrosion Conference Series).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2 Citations (Scopus)

Corrosion behaviour of laser treated ZE41 magnesium alloy at different depths of a laser treated zone

Chakraborty Banerjee, P., Singh, R. R. K., Durandet, Y. & McAdam, G., 2009, Corrosion & Prevention 2009: The Management of Infrastructure Deterioration. Dockrill, B. (ed.). Kerrimuir Victoria: Australasian Corrosion Association, p. 1 - 10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Determination of threshold stress intensity factor for stress corrosion cracking (KISCC) of steel heat affected zone

Pal, S. S. & Singh, R. R. K., 2009, In : Corrosion Science. 51, 10, p. 2443 - 2449 7 p.

Research output: Contribution to journalArticleResearchpeer-review

14 Citations (Scopus)

Fracture toughness for CNT specimens from numerically obtained critical CTOD values

Wu, F. W., Ibrahim, R. N., Das, R. & Singh, R. R. K., 2009, In : Theoretical and Applied Fracture Mechanics. 52, 1, p. 50 - 54 5 p.

Research output: Contribution to journalArticleResearchpeer-review

10 Citations (Scopus)

Influence of Laser Surface Melting on the Microstructure and Corrosion Behaviour of ZE41 Magnesium Alloy

Chakraborty Banerjee, P., Singh, R. R. K., Durandet, Y. & McAdam, G., 2009, Materials Science Forum [P]. Dargusch, M. & Keay, S. (eds.). Switzerland: Trans Tech Publications, Vol. 618 - 619. p. 263 - 268 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

5 Citations (Scopus)

Less explored types of environment-assisted cracking of welds: Industrial issues and research opportunities

Singh, R. R. K., 2009, Weld Cracking in Ferrous Alloys. Sing, R. K. (ed.). Cambridge UK: Woodhead Publishing Limited, p. 534-545 12 p.

Research output: Chapter in Book/Report/Conference proceedingChapter (Book)Researchpeer-review

Magnesium alloys as biodegradable implants

Mathan, B. K. & Singh, R. R. K., 2009, Proceedings of the Fourth International Light Metals Technology Conference 2009: 29 June - 1st July 2009, Gold Coast, Australia. Dargusch, M. S. & Keay, S. M. (eds.). Pfaffikon Switzerland: Trans Tech Publications, p. 83-86 4 p. (Materials Science Forum; vol. 618-619).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Mechanism and Mitigation of corrosion Assisted Cracking of Steels for Tubing, Vessels and Pipes at Elevated Temperatures

Singh, R. R. K., 2009, Pressure Vessels and Piping, Vol II: Materials and Properties. Raj, B., Choudhary, B. K. & Kumar, A. (eds.). New Delhi, India: Narosa Publishing House, p. 646 - 653 8 p.

Research output: Chapter in Book/Report/Conference proceedingChapter (Book)Researchpeer-review

Oxidation resistance of nanocrystalline vis-a-vis microcrystalline Fe-Cr alloys

Singh Raman, R. K. & Gupta, R. K., 2009, In : Corrosion Science. 51, 2, p. 316 - 321 6 p.

Research output: Contribution to journalArticleResearchpeer-review

41 Citations (Scopus)

Role of Electrochemical Conditioning in Caustic Cracking of Steel Vessels and Pipes for Alumina Processing

Saxena, A. & Singh, R. R. K., 2009, Pressure Vessels and Piping, Vol II: Materials and Properties. Raj, B., Choudhary, B. K. & Kumar, A. (eds.). New Delhi, India: Narosa Publishing House, p. 697 - 710 14 p.

Research output: Chapter in Book/Report/Conference proceedingChapter (Book)Researchpeer-review