Jian Nie

Research output

Research output per year 1992 2003 2005 2006 2008 2009 2010 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2023

• 251 Article
• 63 Conference Paper
• 9 Other
• 6 Paper
• 24 More
  • 6 Conference article
  • 6 Editorial
  • 3 Letter
  • 2 Chapter (Book)
  • 2 Abstract
  • 2 Comment / Debate
  • 2 Review Article
  • 1 Edited Book

Research output per year

Research output per year

Search results

• 2023

  Comparative study of Al-Mg-Ti(-Sc-Zr) Alloys fabricated by cold metal transfer and electron beam additive manufacturing

  Zhu, J., Yan, X., Langan, T. & Nie, J. F., 2023, Light Metals 2023. Broek, S. (ed.). Springer, p. 1295-1299 5 p. (Minerals, Metals and Materials Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Other
• 2020

  In situ TEM Investigation of c+a dislocations in magnesium

  Liu, B. Y., Liu, F., Li, B., Nie, J. F. & Shan, Z. W., 2020, Magnesium Technology 2020. Jordon, J. B., Miller, V., Joshi, V. V. & Neelameggham, N. R. (eds.). Springer, p. 135-139 5 p. (Minerals, Metals and Materials Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Other

• Intermetallic phase formation in Mg–Ag–Nd (QE) and Mg–Ag–Nd–Zn (QEZ) alloys

  Schmid-Fetzer, R., Nie, J. F., Zhao, X. & Chen, H., 3 Apr 2020, Magnesium Technology 2020. Jordon, J. B., Miller, V., Joshi, V. V. & Neelameggham, N. R. (eds.). Springer, p. 71-78 8 p. (Minerals, Metals and Materials Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Other
  2 Citations (Scopus)
• 2019

  Isometric tilt grain boundaries and solute segregation in a deformed Mg–Zn–Ca alloy

  Zhu, Y. M. & Nie, J. F., 1 Jan 2019, Magnesium Technology, 2019. Neelameggham, N. R., Jordon, J. B., Orlov, D. & Joshi, V. V. (eds.). Springer, p. 263-266 4 p. (Minerals, Metals and Materials Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Other
  1 Citation (Scopus)
• 2018

  Development of magnesium-rare earth die-casting alloys

  Easton, M., Gibson, M. A., Zhu, S., Abbott, T., Nie, J. F., Bettles, C. J. & Savage, G., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer, p. 329-336 8 p. (Minerals, Metals and Materials Series; vol. Part F7).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Other
  11 Citations (Scopus)
• 2017

  Development of 〈1010〉 Texture During Tensile Test at Room Temperature

  Zeng, Z., Bian, M., Xu, S., Davies, C. H. J., Birbilis, N. & Nie, J. F., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer, p. 521-524 4 p. (Minerals, Metals and Materials Series; vol. Part F8).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Other

• Influence of flash treatment on pseudoelastic behaviour of biomedical Ti-25Nb-3Zr-3Mo-2Sn alloy

  Zhu, S., Zhu, Y., Dargusch, M. & Nie, J-F., 2017, THERMEC 2016. Sommitsch, C., Ionescu, M., Mishra, B., Kozeschnik, E. & Chandra, T. (eds.). Pfaffikon Switzerland: Trans Tech Publications, p. 1375-1380 6 p. (Materials Science Forum; vol. 879).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

• Phase stability and formation in Mg–Gd–Zn alloys—key data for ICME of Mg alloys

  Schmid-Fetzer, R., Gröbner, J., Zhu, S., Nie, J. F. & Gibson, M. A., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer, p. 365-371 7 p. (Minerals, Metals and Materials Series; vol. Part F8).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Other

• Zn segregation at precipitate/matrix interface in Mg–Sn–Zn alloys

  Liu, C., Chen, H. & Nie, J. F., 1 Jan 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer, p. 53-59 7 p. (Minerals, Metals and Materials Series; vol. Part F8).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Other
  4 Citations (Scopus)
• 2016

  Hot tearing in magnesium-rare earth alloys

  Easton, M., Gavras, S., Gibson, M., Zhu, S., Nie, J. F. & Abbott, T., 2016, TMS 2016: Proceedings of the Magnesium Technology Symposium held at the 145th TMS Annual Meeting & Exhibition: Nashville, Tennessee; February 14-18, 2016. Singh, A., Solanki, K., Manuel, M. V. & Neelameggham, N. R. (eds.). Hoboken NJ USA: John Wiley & Sons, p. 123-128 6 p. (Magnesium Technology; vol. 2016).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

  3 Citations (Scopus)

• Phase field simulation of orowan strengthening by coherent precipitate plates in a Mg-Nd alloy

  Liu, H., Wang, Y. & Nie, J. F., 2016, Proceedings of the 3rd World Congress on Integrated Computational Materials Engineering, ICME 2015: Colorado Springs, USA; 31 May 2015 through 4 June 2015. Poole, W., Christensen, S., Kalidindi, S., Luo, A., Madison, J., Raabe, D. & Sun, X. (eds.). Switzerland: Springer, p. 63-71 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

  2 Citations (Scopus)
• 2013

  Effects of zinc and strontium on the corrosion of aluminium-free magnesium alloys

  Xia, X., Birbilis, N., Davies, C. H. J. & Nie, J. F., 2013, Annual Conference of the Australasian Corrosion Association 2013: Corrosion and Prevention 2013: Brisbane, Australia; 10-13 November 2013. Kerrimuir VIC Australia: Australasian Corrosion Association (ACA), p. 697-705 9 p. 121

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

• Study of Mg-Y-Zn rod produced by ECAP powder compaction

  Lapovok, R., Ng, H. P., Nie, J. F., Estrin, Y. & Mathaudhu, S. N., 2013, Materials Science and Technology Conference and Exhibition 2013, (MS&T'13): Montreal, QC Canada; 27-31 October 2013. Warrendale, PA, USA: Materials Science and Technology (MS&T), Vol. 2. p. 1414-1422 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research

  1 Citation (Scopus)

• Texture and microstructure developments during friction stir processing of magnesium alloy AZ31

  Tripathi, A., Samajdar, I., Tewari, A., Kanjarla, A. K., Srinivasan, N., Reddy, G. M. & Nie, J. F., 2013, Materials Science and Technology Conference and Exhibition 2013, (MS&T'13): Montreal, QC Canada; 27-31 October 2013. Warrendale, PA, USA: Materials Science and Technology (MS&T), Vol. 3. p. 1516-1517 2 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Other

• Thermodynamics of phase formation in Mg-La-Ce-Nd alloys

  Schmid-Fetzer, R., Grobner, J., Kozlov, A., Hampl, M., Easton, M. A., Zhu, S-M., Gibson, M. A. & Nie, J. F., 2013, Magnesium Technology 2013. Hort, N., Mathaudhu, S. N., Neelameggham, N. R. & Alderman, M. (eds.). Hoboken NY USA: John Wiley & Sons, p. 243 - 248 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review
  3 Citations (Scopus)
• 2012

  Composition effects on the corrosion of aluminium-free magnesium alloys

  Xia, X., Birbilis, N., Davies, C. H. J. & Nie, J. F., 2012, Annual Conference of the Australasian Corrosion Association 2012: Melbourne, Victoria, Australia; 11-14 November 2012. Kerrimuir VIC Australia: Australasian Corrosion Association, p. 770-778 9 p. 142

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

  1 Citation (Scopus)

• Phase field modeling of beta1 precipitation in WE54 alloy

  Gao, Y., Liu, H., Shi, R., Zhou, N., Xu, Z. L., Nie, J. F. & Wang, Y., 2012, Magnesium Technology 2012 - Held During TMS 2012 Annual Meeting and Exhibition: Orlando, Florida, USA; March 11-15, 2012. Mathaudhu, S. N., Sillekens, W. H., Neelameggham, N. R. & Hort, N. (eds.). Hoboken NJ USA: John Wiley & Sons, p. 377 - 382 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review
  2 Citations (Scopus)
• 2011

  Correlated nucleation of precipitates in magnesium alloy WE54

  Liu, H., Gao, Y., Wang, Y. & Nie, J-F., 2011, Proceedings of the 1st World Congress on Integrated Computational Materials Engineering, ICME: Seven Springs, PA, USA; 10-14 July 2011. Allison, J., Collins, P. & Spanos, G. (eds.). Hoboken NJ USA: John Wiley & Sons, p. 3-8 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

• Deposition and in-vitro degradation of calcium phosphate coating on a magnesium alloy

  Choudhary, L., Singh, R. & Nie, J., 2011, Proceedings of the 18th International Corrosion Congress. Holloway, L. (ed.). Melbourne Vic Australia: Australasian Corrosion Association, p. 1 - 8 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

• Ductility improvement of Mg-Nd-Zr cast alloy by trace addition of Zn

  Fu, P., Peng, L., Nie, J. F., Jiang, H., Ma, L. & Bourgeois, L., 14 Jun 2011, Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Trans Tech Publications, Vol. 690. p. 230-233 4 p. (Materials Science Forum; vol. 690).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review
  14 Citations (Scopus)

• Effects of heat treatment on a high-pressure die-cast Mg-La-Y alloy

  Gavras, S., Zhu, S-M., Easton, M., Gibson, M. & Nie, J., 2011, Materials Science Forum - Light Metals Technology V. Dieringa, H., Hort, N. & Kainer, K. U. (eds.). Switzerland: Trans Tech Publications, Vol. 690. p. 210 - 213 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review
  2 Citations (Scopus)

• Thermodynamic analysis of as-cast and heat treated microstructures of Mg-Ce-Nd alloys

  Easton, M. A., Zhu, S., Gibson, M. A., Nie, J-F., Gröbner, J., Kozlov, A. & Schmid-Fetzer, R., 26 Apr 2011, Magnesium Technology 2011: Held during TMS 2011 Annual Meeting & Exhibition, San Diego, California, USA, February 27-March 3, 2011. Silleken, W. H., Agnew, S. R., Neelameggham, N. R. & Mathaudhu, S. N. (eds.). Hoboken NJ USA: John Wiley & Sons, p. 167 1 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Other › peer-review
• 2010

  Amorphous magnesium sheet produced by twin roll casting

  East, D., Kellam, M., Gibson, M. A., Seeber, A., Liang, D. & Nie, J. F., 17 Aug 2010, PRICM7. p. 1078-1081 4 p. (Materials Science Forum; vol. 654-656).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review
  9 Citations (Scopus)

• Dispersoid phases in 6xxx series aluminium alloys

  Strobel, K., Sweet, E., Easton, M., Nie, J. & Couper, M., 2010, Materials Science Forum. Switzerland: Trans Tech Publications, Vol. 654-656. p. 926 - 929 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review
  31 Citations (Scopus)

• Influence of eutectic morphology on the impact properties of high pressure die cast Mg-rare-earth alloys

  Easton, M., Strobel, K., Zhu, S-M., Gibson, M. & Nie, J., 2010, Materials Science Forum. Nie, J-F. & Morton, A. (eds.). Switzerland: Trans Tech Publications, Vol. 654-656. p. 683 - 686 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review
  4 Citations (Scopus)

• Precipitation sequence in an AI-Si-Mg foundry alloy

  Rinderer, B., Couper, M., Xiong, X-Y., Gao, X. & Nie, J., 2010, Materials Science Forum. Nie, J-F. & Morton, A. (eds.). Switzerland: Trans Tech Publications, Vol. 654-656. p. 590 - 595 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review
  13 Citations (Scopus)
• 2009

  Microstructure and mechanical properties of a Mg-rare earth based alloy Am-SC1

  Gibson, M. A., Bettles, C. J., Zhu, S. M., Easton, M. A. & Nie, J. F., 5 Oct 2009, Magnesium Technology 2009. p. 243-248 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

  4 Citations (Scopus)

• Microstructure and mechanical properties of a Mg-rare earth based alloy AM-SC1

  Gibson, M. A., Bettles, C. J., Zhu, S-M., Easton, M. A. & Nie, J. F., 2009, Magnesium Technology 2009. Nyberg, E., Agnew, S., Neelameggham, N. & Pekguleryuz, M. (eds.). Warrendale PA, USA: The Minerals, Metals & Materials Society, p. 234 - 248 15 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

• Microstructure and mechanical properties of a Mg-RARE earth based alloy AM-SC1

  Gibson, M. A., Bettles, C. J., Zhu, S. M., Easton, M. A. & Nie, J. F., 2009, Linking Science and Technology for Global Solution - Proceedings of Symposia held during TMS 2009 Annual Meeting and Exhibition. p. 243-248 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

  1 Citation (Scopus)

• On the creep resistance of HPDC Mg-RE based alloys

  Zhu, S-M., Gibson, M. A., Nie, J. F., Easton, M. A. & Bettles, C. J., 2009, Materials Science Forum. Dargusch, M. S. & Keay, S. M. (eds.). Zurich, Switzerland: Trans Tech Publications, Vol. 618-619. p. 453 - 458 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

  6 Citations (Scopus)
• 2008

  A comparative study of the microstructure and creep behaviour of AE42 and AE44 die-casting alloys

  Zhu, S-M., Gibson, M. A., Nie, J. F., Easton, M. A. & Bakke, P., 2008, Magnesium Technology 2008. Pekguleryuz, M., Nyberg, E., Beals, R. S. & Neelameggham, N. (eds.). Warrendale, PA, USA: The Minerals, Metals & Materials Society, p. 437 - 442 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

• A comparative study of the microstructures and creep behavior of AE42 and AE44 die-casting alloys

  Zhu, S. M., Gibson, M. A., Nie, J. F., Easton, M. A. & Bakke, P., 30 Jun 2008, Magnesium Technology 2008. p. 437-442 6 p. (Magnesium Technology).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Other

  10 Citations (Scopus)

• An assessment of high pressure die cast Mg-Zn-Al alloys

  Easton, M., Abbott, T., Nie, J. F. & Savage, G., 30 Jun 2008, Magnesium Technology 2008. p. 323-328 6 p. (Magnesium Technology).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Other

  17 Citations (Scopus)
• 2007

  Characterization of intermetallic phases and planar defects in Mg-Y-Zn alloys

  Zhu, Y. M., Morton, A. J. & Nie, J. F., Oct 2007, PRICM 6: Sixth Pacific Rim International Conference on Advanced Materials and Processing - Part 1. Chang, Y. W., Kim, N. J. & Lee, C. S. (eds.). Pfaffikon Switzerland: Trans Tech Publications, p. 151-154 4 p. (Materials Science Forum; vol. 561-565).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review
  5 Citations (Scopus)

• Zr-containing precipitates in Mg-3wt%Nd-0.2wt%Zn-0.4wt%Zr alloy during solutionTreatment at 540°C

  Fu, P., Peng, L., Jiang, H., Zhai, C., Gao, X. & Nie, J. F., 1 Dec 2007, Progress in Light Metals, Aerospace Materials and Superconductors. PART 1 ed. p. 97-100 4 p. (Materials Science Forum; vol. 546-549, no. PART 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Other

  47 Citations (Scopus)
• 2006

  Identification of quasicrystalline particles in an isothermally aged Al-10Mg-0.5Ag alloy

  Kubota, M., Nie, J. F. & Muddle, B. C., 2006, Materials Science Forum. Poole, W. J., Wells, M. A. & Lloyd, D. J. (eds.). Switzerland: Trans Tech Publications, Vol. 519-521. p. 561 - 566 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

• Identification of quasicrystalline particles in anlsothermally aged Al-10Mg-0.5Ag alloy

  Kubota, M., Nie, J. F. & Muddle, B. C., 1 Dec 2006, Aluminium Alloys 2006: Research Through Innovation and Technology - Proceedings of the 10th International Conference on Aluminium Alloys. PART 1 ed. p. 561-566 6 p. (Materials Science Forum; vol. 519-521, no. PART 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Other

  2 Citations (Scopus)

• Improved multiple ageing treatments for AA6111

  Goh, S. L., Nie, J. F., Bourgeois, L., Muddle, B. C. & Embury, J. D., 1 Dec 2006, Aluminium Alloys 2006: Research Through Innovation and Technology - Proceedings of the 10th International Conference on Aluminium Alloys. PART 2 ed. p. 1499-1504 6 p. (Materials Science Forum; vol. 519-521, no. PART 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Other

  3 Citations (Scopus)

• Improved Multiple Ageing Treatments for AA61111

  Goh, S. L., Nie, J. F., Bourgeois, L. N., Muddle, B. C. & Embury, J. D., 2006, Materials Science Forum. Poole, W. J., Wells, M. A. & Lloyd, D. J. (eds.). Switzerland: Trans Tech Publications, Vol. 519-521. p. 1499 - 1504 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

• Interaction between Cu and Sn in the early stages of ageing of Al-1.7at.%Cu-0.01at.%Sn

  Bourgeois, L., Wong, T., Xiong, X. Y., Nie, J. F. & Muddle, B. C., 1 Dec 2006, Aluminium Alloys 2006: Research Through Innovation and Technology - Proceedings of the 10th International Conference on Aluminium Alloys. Poole, W. J., Wells, M. A. & Lloyd, D. J. (eds.). PART 1 ed. Switzerland: Trans Tech Publications, Vol. 519-521. p. 495-500 6 p. (Materials Science Forum; vol. 519-521, no. PART 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

  12 Citations (Scopus)

• Multi-scale structural design and processing for increased strength in aluminium alloys

  Muddle, B. C., Nie, J. F. & Hutchinson, C., 2006, Simulation of aluminium shape casting processing: From alloy design to mechanical properties:. Wang, Q., Krane, M. J. M. & Lee, P. D. (eds.). Warrendale, PA, USA: The Minerals, Metals & Materials Society, p. 3 - 12 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

  2 Citations (Scopus)

• Nucleation-mediated Structural Refinement and Aluminium Alloy Design

  Muddle, B. C. & Nie, J. F., 2006, Materials Science Forum. Poole, W. J., Wells, M. A. & Lloyd, D. J. (eds.). Switzerland: Trans Tech Publications, Vol. 519. p. 191 - 196 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

  13 Citations (Scopus)
• 2005

  An Electron Microscope Study of Intermetallic Phases in AZ91 Alloy Variants

  Sato, T., Mordike, B., Nie, J. F. & Kral, M. V., 2005, Magnesium Technology 2005. Neelameggham, N. R., Kaplan, H. I. & Powell, B. R. (eds.). Warrendale PA USA: The Minerals, Metals & Materials Society, p. 435 - 440 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

  6 Citations (Scopus)

• Creep Studies of MR1153 Magnesium Alloy Castings

  Zhu, S-M., Mordike, B. & Nie, J. F., 2005, Magnesium Technology 2005. Neelameggham, N. R., Kaplan, H. I. & Powell, B. R. (eds.). Warrendale PA USA: The Minerals, Metals & Materials Society, p. 429 - 434 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

• New Phases in Mg-Al-Ca System

  Zhong, Y., Luo, A., Nie, J. F., Sofo, J. O. & Liu, Z. K., 2005, Magnesium Technology 2005. Neelameggham, N. R., Kaplan, H. I. & Powell, B. R. (eds.). Warrendale PA USA: The Minerals, Metals & Materials Society, p. 185 - 190 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

  3 Citations (Scopus)
• 2004

  The Portevin-Le Chatelier Effect and creep behaviour in a Mg-Ca-Zn-Zr alloy

  Zhu, S-M., Gao, X. & Nie, J. F., 2004, Magnesium Technology 2004. Luo, A. A. (ed.). Warrendale PA USA: The Minerals, Metals & Materials Society, p. 325 - 330 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

  1 Citation (Scopus)

• Vacancies and the tin-assisted nucleation of ' in Al-Cu-Sn

  Bourgeois, L. N., Garg, P., Nie, J. F. & Muddle, B. C., 2004, Materials Forum: Aluminium Alloys, their Physical and Mechanical Properties. Nie, J. F. (ed.). Melboune Australia: Institute of Materials Engineering Australasia, Vol. 28. p. 1341 - 1346 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review
• 2003

  Corrosion of magnesium alloy AZ91: The role of microstructure

  Singh Raman, R. K., Birbilis, N., Anderson, L., Nie, J. F. & Cherry, B. W., 2003, Proc. Corrosion Control and NDT Conference 2003. Dove, P. & et al (eds.). Melbourne Vic Australia: Australasian Corrosion Association (ACA), p. 30-1 - 30-8 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

• Corrosion of magnesium alloys: Monash University activities

  Singh Raman, R. K., Cherry, B. W., Nie, J. F. & Muddle, B. C., 2003, Proc. First International Light Metals Technology Conference. Dahle, A. (ed.). Brisbane Qld Australia: The University of Queensland, p. 405 - 407 3 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

• Effects of Ca additions on microstructures, age hardening response and creep behaviour of Mg-8Zn-4Al casting alloy

  Mendis, C., Bourgeois, L. N., Muddle, B. C. & Nie, J. F., 2003, Proc. Magnesium Technology Symposium 2003. Kaplan, H. (ed.). Warrendale PA USA: The Minerals, Metals & Materials Society, p. 183 - 188 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research › peer-review

  12 Citations (Scopus)