19972021

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Article

A comparison of EDS microanalysis in FIB-prepared and electropolished TEM thin foils

Hutchinson, C., Hackenberg, R. E. & Shiflet, G. J., 2003, In : Ultramicroscopy. 94, 1, p. 37 - 48 12 p.

Research output: Contribution to journalArticleResearchpeer-review

29 Citations (Scopus)

A comparison of ferrite growth kinetics under denitriding and decarburizing conditions

Guo, M., Panahi, D., Van Landeghem, H., Hutchinson, C. R., Purdy, G. & Zurob, H. S., Jun 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 46A, 6, p. 2449-2454 6 p.

Research output: Contribution to journalArticleResearchpeer-review

7 Citations (Scopus)

Advanced high strength steel (AHSS) development through chemical patterning of austenite

Sun, W. W., Wu, Y. X., Yang, S. C. & Hutchinson, C. R., 15 Mar 2018, In : Scripta Materialia. 146, p. 60-63 4 p.

Research output: Contribution to journalArticleResearchpeer-review

16 Citations (Scopus)

ALEMI: A ten-year history of discussions of alloying-element interactions with migrating interfaces

Purdy, G., Agren, J., Borgenstam, A., Brechet, Y., Enomoto, M., Furuhara, T., Gamsjager, E., Goune, M., Hillert, M., Hutchinson, C., Militzer, M. & Zurob, H., 2011, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 42A, 12, p. 3703 - 3718 16 p.

Research output: Contribution to journalArticleResearchpeer-review

55 Citations (Scopus)

Analysis of the effect of Mn on the recrystallization kinetics of high Nb steel: An example of physically-based alloy design

Zurob, H. S., Zhu, G., Subramanian, S. V., Purdy, G. R., Hutchinson, C. R. & Brechet, Y., 2005, In : ISIJ International. 45, 5, p. 713 - 722 9 p.

Research output: Contribution to journalArticleResearchpeer-review

40 Citations (Scopus)

An enhanced age hardening response in Mg-Sn based alloys containing Zn

Mendis, C. L., Bettles, C. J., Gibson, M. A. & Hutchinson, C., 2006, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 435-436, p. 163 - 171 9 p.

Research output: Contribution to journalArticleResearchpeer-review

233 Citations (Scopus)

A new total-Lagrangian smooth particle hydrodynamics approximation for the simulation of damage and fracture of ductile materials

de Vaucorbeil, A. & Hutchinson, C. R., 24 Dec 2019, (Accepted/In press) In : International Journal for Numerical Methods in Engineering. 19 p.

Research output: Contribution to journalArticleResearchpeer-review

1 Citation (Scopus)

A novel experimental approach to identifying kinetic transitions in solid state phase transformations

Hutchinson, C. R., Fuchsmann, A., Zurob, H. S. & Brechet, Y., 2004, In : Scripta Materialia. 50, 2, p. 285 - 289 5 p.

Research output: Contribution to journalArticleResearchpeer-review

30 Citations (Scopus)

Assembly of nanoparticles-polyelectrolyte complexes in nanofiber cellulose structures

Garusinghe, U. M., Raghuwanshi, V. S., Garvey, C. J., Varanasi, S., Hutchinson, C. R., Batchelor, W. & Garnier, G., 5 Jan 2017, In : Colloids and Surfaces A: Physicochemical and Engineering Aspects. 513, p. 373-379 7 p.

Research output: Contribution to journalArticleResearchpeer-review

8 Citations (Scopus)

A study of the composition dependence of the rapid hardening phenomenon in A1-Cu-Mg alloys using diffusion couples

Marceau, R. K. W., Qiu, C., Ringer, S. P. & Hutchinson, C., 2012, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 546, p. 153 - 161 9 p.

Research output: Contribution to journalArticleResearchpeer-review

25 Citations (Scopus)

A Thermodynamic Assessment of the Mg-Nd Binary System using Random Solution and Associate Models for the liquid Phase

Gorsse, S., Hutchinson, C. R., Chevalier, B. & Nie, J. F., 2005, In : Journal of Alloys and Compounds. 392, 1-Feb, p. 253 - 262 10 p.

Research output: Contribution to journalArticleResearchpeer-review

79 Citations (Scopus)

A three-dimensional characterization of creep void formation in hydrogen reformer tubes

Wahab, A. A., Hutchinson, C. & Kral, M. V., 2006, In : Scripta Materialia. 55, 1, p. 69 - 73 5 p.

Research output: Contribution to journalArticleResearchpeer-review

14 Citations (Scopus)

A Total-Lagrangian Material Point Method for solid mechanics problems involving large deformations

de Vaucorbeil, A., Nguyen, V. P. & Hutchinson, C. R., 1 Mar 2020, In : Computer Methods in Applied Mechanics and Engineering. 360, 31 p., 112783.

Research output: Contribution to journalArticleResearchpeer-review

A transition from local equilibrium to paraequilibrium kinetics for ferrite growth in Fe-C-Mn: A possible role of interfacial segregation

Zurob, H. S., Hutchinson, C., Beche, A., Purdy, G. R. & Brechet, Y., 2008, In : Acta Materialia. 56, p. 2203 - 2211 9 p.

Research output: Contribution to journalArticleResearchpeer-review

64 Citations (Scopus)

Cementite coarsening during the tempering of Fe-C-Mn martensite

Wu, Y. X., Sun, W. W., Styles, M. J., Arlazarov, A. & Hutchinson, C. R., 15 Oct 2018, In : Acta Materialia. 159, p. 209-224 16 p.

Research output: Contribution to journalArticleResearchpeer-review

8 Citations (Scopus)

Classification of major cohorts of Australian pressurised cast iron water mains for pipe renewal

Jiang, R., Shannon, B., Deo, R. N., Rathnayaka, S., Hutchinson, C. R., Zhao, X. L. & Kodikara, J., 2017, In : Australian Journal of Water Resources. 21, 2, p. 77-88 12 p.

Research output: Contribution to journalArticleResearchpeer-review

6 Citations (Scopus)

Clustering and Precipitation Processes in Microalloyed Aluminium Alloys

Ringer, S. P., Hutchinson, C. R., Hono, K., Polmear, I. J. & Sakurai, T., 1997, In : Science Reports of the Research Institutes, Tohoku University, Series A: Physics, Chemistry and Metallurgy. p. 241 - 251 11 p.

Research output: Contribution to journalArticleResearchpeer-review

1 Citation (Scopus)

Corrosion of heat treated magnesium alloy ZE41

Neil, W., Forsyth, M., Howlett, P., Hutchinson, C. & Hinton, B., 2011, In : Corrosion Science. 53, 10, p. 3299 - 3308 10 p.

Research output: Contribution to journalArticleResearchpeer-review

46 Citations (Scopus)

Corrosion of magnesium alloy ZE41 - The role of microstructural features

Neil, W., Forsyth, M., Howlett, P. C., Hutchinson, C. & Hinton, B. R. W., 2009, In : Corrosion Science. 51, 2, p. 387 - 394 8 p.

Research output: Contribution to journalArticleResearchpeer-review

116 Citations (Scopus)

Corrosion-wear of β-Ti alloy TMZF (Ti-12Mo-6Zr-2Fe) in simulated body fluid

Yang, X. & Hutchinson, C. R., 15 Sep 2016, In : Acta Biomaterialia. 42, p. 429-439 11 p.

Research output: Contribution to journalArticleResearchpeer-review

40 Citations (Scopus)

Coupled precipitation and yield strength modelling for non-isothermal treatments of a 6061 aluminium alloy

Bardel, D., Perez, M., Nelias, D., Deschamps, A., Hutchinson, C. R., Maisonnette, D., Chaise, T., Gamier, J. & Bourlier, F., 2014, In : Acta Materialia. 62, p. 129 - 140 12 p.

Research output: Contribution to journalArticleResearchpeer-review

66 Citations (Scopus)

Coupled solute drag and transformation stasis during ferrite formation in Fe-C-Mn-Mo

Sun, W. W., Zurob, H. S. & Hutchinson, C. R., 15 Oct 2017, In : Acta Materialia. 139, p. 62-74 13 p.

Research output: Contribution to journalArticleResearchpeer-review

10 Citations (Scopus)

Defect-induced dynamic pattern formation in metals and alloys

Brechet, Y. & Hutchinson, C., 2006, In : Solid State Physics-Advances in Research and Applications. 60, p. 181 - 287 107 p.

Research output: Contribution to journalArticleResearchpeer-review

13 Citations (Scopus)

Diffusion and Phase Transformations in Steels: A Tool for Experimentation and a Method for Modelling

Brechet, Y., Hutchinson, C., Purdy, G. R. & Zurob, H. S., 2006, In : Diffusion and Defect Data. Pt A Defect and Diffusion Forum. 249, p. 239 - 246 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Dynamic precipitation during cyclic deformation of an underaged A1-Cu alloy

Han, W., Chen, Y., Vinogradov, A. & Hutchinson, C., 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 528, 24, p. 7410 - 7416 7 p.

Research output: Contribution to journalArticleResearchpeer-review

27 Citations (Scopus)

Effect of annealing below the crystallization temperature on the corrosion behavior of Al-Ni-Y metallic glasses

Jindal, R., Raja, S., Gibson, M. A., Styles, M. J., Bastow, T. J. & Hutchinson, C., 2014, In : Corrosion Science. 84, p. 54 - 65 12 p.

Research output: Contribution to journalArticleResearchpeer-review

28 Citations (Scopus)

Effect of C and N and their absence on the kinetics of austenite-ferrite phase transformations in Fe-0.5Mn alloy

Farahani, H., Zurob, H., Hutchinson, C. R. & van der Zwaag, S., 15 May 2018, In : Acta Materialia. 150, p. 224-235 12 p.

Research output: Contribution to journalArticleResearchpeer-review

1 Citation (Scopus)

Effect of creep strain on mechanical behaviour of ultra-high strength (Grade 1200) steel subject to cooling phase of a fire

Azhari, F., Heidarpour, A., Zhao, X-L. & Hutchinson, C. R., 1 Apr 2017, In : Construction and Building Materials. 136, p. 18-30 13 p.

Research output: Contribution to journalArticleResearchpeer-review

9 Citations (Scopus)

Effect of Nb on ferrite recrystallitzation and austenite decomposition in microalloyed steels

Brechet, Y., Hutchinson, C., Zurob, H. S. & Sinclair, C. W., 2007, In : Steel Research International. 78, 3, p. 210 - 215 6 p.

Research output: Contribution to journalArticleResearchpeer-review

2 Citations (Scopus)

Effect of strain ageing on the mechanical properties of partially damaged structural mild steel

Hosseini, S. S., Heidarpour, A., Collins, F. G. & Hutchinson, C., 2015, In : Construction and Building Materials. 77, p. 83 - 93 11 p.

Research output: Contribution to journalArticleResearchpeer-review

22 Citations (Scopus)

Effect of weld on the mechanical properties of high strength and ultra-high strength steel tubes in fabricated hybrid sections

Javidan, F., Heidarpour, A., Zhao, X-L., Hutchinson, C. R. & Minkkinen, J., 1 Jul 2016, In : Engineering Structures. 118, p. 16-27 12 p.

Research output: Contribution to journalArticleResearchpeer-review

28 Citations (Scopus)

Enhanced recovery and recrystallization of metals due to an applied current

Fabregue, D., Mouawad, B. & Hutchinson, C., 1 Dec 2014, In : Scripta Materialia. 92, p. 3-6 4 p.

Research output: Contribution to journalArticleResearchpeer-review

17 Citations (Scopus)

Fracture behaviour and microstructural evolution of structural mild steel under the multi-hazard loading of high-strain-rate load followed by elevated temperature

Mirmomeni, M., Heidarpour, A., Zhao, X. L., Hutchinson, C. R., Packer, J. A. & Wu, C., 30 Sep 2016, In : Construction and Building Materials. 122, p. 760-771 12 p.

Research output: Contribution to journalArticleResearchpeer-review

16 Citations (Scopus)

G phase precipitation and strengthening in ultra-high strength ferritic steels: Towards lean ‘maraging’ metallurgy

Sun, W. W., Marceau, R. K. W., Styles, M. J., Barbier, D. & Hutchinson, C. R., 15 May 2017, In : Acta Materialia. 130, p. 28-46 19 p.

Research output: Contribution to journalArticleResearchpeer-review

12 Citations (Scopus)

Hardening and defect structures in thermomechanically processed Al-2.5Cu-1.5Mg (wt.%) alloy

Raviprasad, K., Hutchinson, C. R. & Ringer, S. P., 1 Dec 2000, In : Materials Science Forum. 331-337 II, p. 1077-1082 6 p.

Research output: Contribution to journalArticleResearchpeer-review

3 Citations (Scopus)

High-throughput in-situ characterization and modeling of precipitation kinetics in compositionally graded alloys

De Geuser, F., Styles, M. J., Hutchinson, C. R. & Deschamps, A., 2015, In : Acta Materialia. 101, p. 1 - 9 9 p.

Research output: Contribution to journalArticleResearchpeer-review

14 Citations (Scopus)

Influence of precipitation on yield elongation in Mg-Zn alloys

Wang, J., Ferdowsi, M. R. G., Kada, S. R., Hutchinson, C. R. & Barnett, M. R., 1 Feb 2019, In : Scripta Materialia. 160, p. 5-8 4 p.

Research output: Contribution to journalArticleResearchpeer-review

7 Citations (Scopus)

In situ evaluation of dynamic precipitation during plastic straining of an A1-Zn-Mg-Cu alloy

Deschamps, A., Fribourg, G., Brechet, Y., Chemin, J. L. & Hutchinson, C., 2012, In : Acta Materialia. 60, 5, p. 1905 - 1916 12 p.

Research output: Contribution to journalArticleResearchpeer-review

74 Citations (Scopus)

In situ evaluation of the microstructure evolution during rapid hardening of an A1-2.5Cu-1.5Mg (wt.%) alloy

Deschamps, A., Bastow, T., De Geuser, F., Hill, A. & Hutchinson, C., 2011, In : Acta Materialia. 59, 8, p. 2918 - 2927 10 p.

Research output: Contribution to journalArticleResearchpeer-review

55 Citations (Scopus)

Kinetic transitions during non-partitioned ferrite growth in Fe-C-X alloys

Zurob, H. S., Hutchinson, C., Brechet, Y., Seyedrezai, H. & Purdy, G. R., 2009, In : Acta Materialia. 57, 9, p. 2781 - 2792 12 p.

Research output: Contribution to journalArticleResearchpeer-review

54 Citations (Scopus)

Leak-before-break in cast iron mains: A failure analysis of a catastrophic pipe burst on Harris Street, Sydney

Jiang, R., Robert, D., Hutchinson, C. R., Zhao, X. L. & Kodikara, J., 1 Jun 2017, In : Water Practice and Technology. 12, 2, p. 487-494 8 p.

Research output: Contribution to journalArticleResearchpeer-review

2 Citations (Scopus)

Linking Surface Precipitation in Fe-Au Alloys to Its Self-healing Potential During Creep Loading

Sun, W., Fang, H., van Dijk, N. H., van der Zwaag, S. & Hutchinson, C. R., 1 May 2017, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 48A, 5, p. 2109-2114 6 p.

Research output: Contribution to journalArticleResearchpeer-review

4 Citations (Scopus)

Mechanical properties of partially damaged structural steel induced by high strain rate loading at elevated temperatures - An experimental investigation

Mirmomeni, M., Heidarpour, A., Zhao, X. L., Hutchinson, C., Packer, J. A. & Wu, C., 2015, In : International Journal of Impact Engineering. 76, p. 178 - 188 11 p.

Research output: Contribution to journalArticleResearchpeer-review

44 Citations (Scopus)

Mechanical properties of ultra-high strength (Grade 1200) steel tubes under cooling phase of a fire: An experimental investigation

Azhari, F., Heidarpour, A., Zhao, X. L. & Hutchinson, C., 2015, In : Construction and Building Materials. 93, p. 841 - 850 10 p.

Research output: Contribution to journalArticleResearchpeer-review

37 Citations (Scopus)

Mechanical properties of very high strength steel at elevated temperatures

Heidarpour, A., Tofts, N. S., Habibnejad Korayem, A., Zhao, X. L. & Hutchinson, C., 2014, In : Fire Safety Journal. 64, p. 27 - 35 9 p.

Research output: Contribution to journalArticleResearchpeer-review

36 Citations (Scopus)

Mechanical response of ultra-high strength (Grade 1200) steel under extreme cooling conditions

Azhari, F., Hossain Apon, A-A., Heidarpour, A., Zhao, X-L. & Hutchinson, C. R., 30 Jun 2018, In : Construction and Building Materials. 175, p. 790-803 14 p.

Research output: Contribution to journalArticleResearchpeer-review

13 Citations (Scopus)

Mesoscale simulations of the kinetics of solid-solid phase transformations: Selecting the relevant interfacial compositions for shape-preserved growth

Hutchinson, C. & Zurob, H., 2010, In : Comptes Rendus Physique. 11, 3-4, p. 257 - 264 8 p.

Research output: Contribution to journalArticleResearchpeer-review

1 Citation (Scopus)

Metastable pitting characteristics of aluminium alloys measured using current transients during potentiostatic polarisation

Gupta, R., Sukiman, N., Cavanaugh, M., Hinton, B., Hutchinson, C. & Birbilis, N., 2012, In : Electrochimica Acta. 66, p. 245 - 254 10 p.

Research output: Contribution to journalArticleResearchpeer-review

77 Citations (Scopus)

Microstructural origin of residual stress relief in aluminum

Lodh, A., Tak, T. N., Prakash, A., Guruprasad, P. J., Keralavarma, S. M., Benzerga, A. A., Hutchinson, C. & Samajdar, I., Nov 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50, 11, p. 5038-5055 18 p.

Research output: Contribution to journalArticleResearchpeer-review

Modeling recrystallization of microalloyed austenite: Effect of coupling recovery, precipitation and recrystallization

Zurob, H. S., Hutchinson, C. R., Brechet, Y. & Purdy, G., 17 Jul 2002, In : Acta Materialia. 50, 12, p. 3077-3094 18 p.

Research output: Contribution to journalArticleResearchpeer-review

79 Citations (Scopus)