If you made any changes in Pure these will be visible here soon.

Research Output 1997 2019

Filter
Article
2019

Influence of precipitation on yield elongation in Mg-Zn alloys

Wang, J., Ferdowsi, M. R. G., Kada, S. R., Hutchinson, C. R. & Barnett, M. R., 1 Feb 2019, In : Scripta Materialia. 160, p. 5-8 4 p.

Research output: Contribution to journalArticleResearchpeer-review

Microstructural origin of residual stress relief in aluminum

Lodh, A., Tak, T. N., Prakash, A., Guruprasad, P. J., Keralavarma, S. M., Benzerga, A. A., Hutchinson, C. & Samajdar, I., 26 Aug 2019, (Accepted/In press) In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 18 p.

Research output: Contribution to journalArticleResearchpeer-review

On the characterization of a hitherto unreported icosahedral quasicrystal phase in additively manufactured aluminum alloy AA7075

Kairy, S. K., Gharbi, O., Nicklaus, J., Jiang, D., Hutchinson, C. R. & Birbilis, N., 15 Feb 2019, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 50A, 2, p. 529-533 5 p.

Research output: Contribution to journalArticleResearchpeer-review

Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity

Sun, W., Zhu, Y., Marceau, R., Wang, L., Zhang, Q., Gao, X. & Hutchinson, C., 1 Mar 2019, In : Science. 363, 6430, p. 972-975 4 p.

Research output: Contribution to journalArticleResearchpeer-review

2018

Advanced high strength steel (AHSS) development through chemical patterning of austenite

Sun, W. W., Wu, Y. X., Yang, S. C. & Hutchinson, C. R., 15 Mar 2018, In : Scripta Materialia. 146, p. 60-63 4 p.

Research output: Contribution to journalArticleResearchpeer-review

Cementite coarsening during the tempering of Fe-C-Mn martensite

Wu, Y. X., Sun, W. W., Styles, M. J., Arlazarov, A. & Hutchinson, C. R., 15 Oct 2018, In : Acta Materialia. 159, p. 209-224 16 p.

Research output: Contribution to journalArticleResearchpeer-review

Effect of C and N and their absence on the kinetics of austenite-ferrite phase transformations in Fe-0.5Mn alloy

Farahani, H., Zurob, H., Hutchinson, C. R. & van der Zwaag, S., 15 May 2018, In : Acta Materialia. 150, p. 224-235 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Mechanical response of ultra-high strength (Grade 1200) steel under extreme cooling conditions

Azhari, F., Hossain Apon, A-A., Heidarpour, A., Zhao, X-L. & Hutchinson, C. R., 30 Jun 2018, In : Construction and Building Materials. 175, p. 790-803 14 p.

Research output: Contribution to journalArticleResearchpeer-review

On the corrosion, electrochemistry and microstructure of Al-Cu-Li alloy AA2050 as a function of ageing

Yan, Y., Peguet, L., Gharbi, O., Deschamps, A., Hutchinson, C. R., Kairy, S. K. & Birbilis, N., 1 Sep 2018, In : Materialia. 1, p. 25-36 12 p.

Research output: Contribution to journalArticleResearchpeer-review

On the corrosion of additively manufactured aluminium alloy AA2024 prepared by selective laser melting

Gharbi, O., Jiang, D., Feenstra, D. R., Kairy, S. K., Wu, Y., Hutchinson, C. R. & Birbilis, N., 1 Oct 2018, In : Corrosion Science. 143, p. 93-106 14 p.

Research output: Contribution to journalArticleResearchpeer-review

On the miniaturised sacrificial protection achieved by surface precipitation in aluminium alloys

Vu Dinh, T., Sun, W. W., Yue, Y., Wu, Y., Hutchinson, C. R. & Thomas, S., 1 Dec 2018, In : Corrosion Science. 145, p. 67-79 13 p.

Research output: Contribution to journalArticleResearchpeer-review

2017

Assembly of nanoparticles-polyelectrolyte complexes in nanofiber cellulose structures

Garusinghe, U. M., Raghuwanshi, V. S., Garvey, C. J., Varanasi, S., Hutchinson, C. R., Batchelor, W. & Garnier, G., 5 Jan 2017, In : Colloids and Surfaces A: Physicohemical and Engineering Aspects. 513, p. 373-379 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Classification of major cohorts of Australian pressurised cast iron water mains for pipe renewal

Jiang, R., Shannon, B., Deo, R. N., Rathnayaka, S., Hutchinson, C. R., Zhao, X. L. & Kodikara, J., 2017, In : Australian Journal of Water Resources. 21, 2, p. 77-88 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Coupled solute drag and transformation stasis during ferrite formation in Fe-C-Mn-Mo

Sun, W. W., Zurob, H. S. & Hutchinson, C. R., 15 Oct 2017, In : Acta Materialia. 139, p. 62-74 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Effect of creep strain on mechanical behaviour of ultra-high strength (Grade 1200) steel subject to cooling phase of a fire

Azhari, F., Heidarpour, A., Zhao, X-L. & Hutchinson, C. R., 1 Apr 2017, In : Construction and Building Materials. 136, p. 18-30 13 p.

Research output: Contribution to journalArticleResearchpeer-review

G phase precipitation and strengthening in ultra-high strength ferritic steels: Towards lean ‘maraging’ metallurgy

Sun, W. W., Marceau, R. K. W., Styles, M. J., Barbier, D. & Hutchinson, C. R., 15 May 2017, In : Acta Materialia. 130, p. 28-46 19 p.

Research output: Contribution to journalArticleResearchpeer-review

Leak-before-break in cast iron mains: A failure analysis of a catastrophic pipe burst on Harris Street, Sydney

Jiang, R., Robert, D., Hutchinson, C. R., Zhao, X. L. & Kodikara, J., 1 Jun 2017, In : Water Practice and Technology. 12, 2, p. 487-494 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Linking Surface Precipitation in Fe-Au Alloys to Its Self-healing Potential During Creep Loading

Sun, W., Fang, H., van Dijk, N. H., van der Zwaag, S. & Hutchinson, C. R., 1 May 2017, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 48A, 5, p. 2109-2114 6 p.

Research output: Contribution to journalArticleResearchpeer-review

On the corrosion and metastable pitting characteristics of 316L stainless steel produced by selective laser melting

Sander, G., Thomas, S., Cruz, V., Jurg, M., Birbilis, N., Gao, X., Brameld, M. & Hutchinson, C. R., 1 Jan 2017, In : Journal of the Electrochemical Society. 164, 6, p. C250-C257 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Post-fire mechanical response of ultra-high strength (Grade 1200) steel under high temperatures: Linking thermal stability and microstructure

Azhari, F., Heidarpour, A., Zhao, X-L. & Hutchinson, C. R., 1 Oct 2017, In : Thin-Walled Structures. 119, p. 114-125 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Relating Residual Stress and Substructural Evolution During Tensile Deformation of an Aluminum-Manganese Alloy

Lodh, A., Tak, T. N., Prakash, A., Guruprasad, P. J., Hutchinson, C. & Samajdar, I., 1 Nov 2017, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 48A, 11, p. 5317-5331 15 p.

Research output: Contribution to journalArticleResearchpeer-review

2016

Corrosion-wear of β-Ti alloy TMZF (Ti-12Mo-6Zr-2Fe) in simulated body fluid

Yang, X. & Hutchinson, C. R., 15 Sep 2016, In : Acta Biomaterialia. 42, p. 429-439 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Effect of weld on the mechanical properties of high strength and ultra-high strength steel tubes in fabricated hybrid sections

Javidan, F., Heidarpour, A., Zhao, X-L., Hutchinson, C. R. & Minkkinen, J., 1 Jul 2016, In : Engineering Structures. 118, p. 16-27 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Fracture behaviour and microstructural evolution of structural mild steel under the multi-hazard loading of high-strain-rate load followed by elevated temperature

Mirmomeni, M., Heidarpour, A., Zhao, X. L., Hutchinson, C. R., Packer, J. A. & Wu, C., 30 Sep 2016, In : Construction and Building Materials. 122, p. 760-771 12 p.

Research output: Contribution to journalArticleResearchpeer-review

On the competition in phase formation during the crystallisation of Al-Ni-Y metallic glasses

Styles, M. J., Sun, W. W., East, D. R., Kimpton, J. A., Gibson, M. A. & Hutchinson, C. R., 2016, In : Acta Materialia. 117, p. 170 - 187 18 p.

Research output: Contribution to journalArticleResearchpeer-review

Solute Segregation During Ferrite Growth: Solute/Interphase and Substitutional/Interstitial Interactions

Van Landeghem, H. P., Langelier, B., Panahi, D., Purdy, G. R., Hutchinson, C. R., Botton, G. A. & Zurob, H. S., 1 May 2016, In : JOM. 68, 5, p. 1329-1334 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Strain ageing effect on the temperature dependent mechanical properties of partially damaged structural mild-steel induced by high strain rate loading

Hosseini, S., Heidarpour, A., Collins, F. & Hutchinson, C. R., 1 Oct 2016, In : Construction and Building Materials. 123, p. 454-463 10 p.

Research output: Contribution to journalArticleResearchpeer-review

The design of hot-isostatic pressing schemes for Ti-5Al-5Mo-5V-3Cr (Ti-5553)

Perevoshchikova, N., Hutchinson, C. R. & Wu, X., 2016, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 657, p. 371 - 382 12 p.

Research output: Contribution to journalArticleResearchpeer-review

2015

A comparison of ferrite growth kinetics under denitriding and decarburizing conditions

Guo, M., Panahi, D., Van Landeghem, H., Hutchinson, C. R., Purdy, G. & Zurob, H. S., Jun 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 46A, 6, p. 2449-2454 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Effect of strain ageing on the mechanical properties of partially damaged structural mild steel

Hosseini, S. S., Heidarpour, A., Collins, F. G. & Hutchinson, C., 2015, In : Construction and Building Materials. 77, p. 83 - 93 11 p.

Research output: Contribution to journalArticleResearchpeer-review

High-throughput in-situ characterization and modeling of precipitation kinetics in compositionally graded alloys

De Geuser, F., Styles, M. J., Hutchinson, C. R. & Deschamps, A., 2015, In : Acta Materialia. 101, p. 1 - 9 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Mechanical properties of partially damaged structural steel induced by high strain rate loading at elevated temperatures - An experimental investigation

Mirmomeni, M., Heidarpour, A., Zhao, X. L., Hutchinson, C., Packer, J. A. & Wu, C., 2015, In : International Journal of Impact Engineering. 76, p. 178 - 188 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Mechanical properties of ultra-high strength (Grade 1200) steel tubes under cooling phase of a fire: An experimental investigation

Azhari, F., Heidarpour, A., Zhao, X. L. & Hutchinson, C., 2015, In : Construction and Building Materials. 93, p. 841 - 850 10 p.

Research output: Contribution to journalArticleResearchpeer-review

New insights into the limit for non-partitioning ferrite growth

Panahi, D., Van Landeghem, H., Hutchinson, C., Purdy, G. R. & Zurob, H. S., 2015, In : Acta Materialia. 86, p. 286 - 294 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Overview of the current issues in austenite to ferrite transformation and the role of migrating interfaces therein for low alloyed steels

Goune, M., Danoix, F., Agren, J., Brechet, Y., Hutchinson, C. R., Militzer, M., Purdy, G. R., van der Zwaag, S. & Zurob, H., 2015, In : Materials Science and Engineering: R: Reports. 92, p. 1 - 38 38 p.

Research output: Contribution to journalArticleResearchpeer-review

The competition between metastable and equilibrium S (Al2CuMg) phase during the decomposition of AlCuMg alloys

Styles, M. J., Marceau, R. K. W., Bastow, T. J., Brand, H. E. A., Gibson, M. A. & Hutchinson, C. R., 2015, In : Acta Materialia. 98, p. 64 - 80 17 p.

Research output: Contribution to journalArticleResearchpeer-review

The coupled solute drag effect during ferrite growth in Fe-C-Mn-Si alloys using controlled decarburization

Qiu, C., Zurob, H. S. & Hutchinson, C. R., 2015, In : Acta Materialia. 100, p. 333 - 343 11 p.

Research output: Contribution to journalArticleResearchpeer-review

2014

Coupled precipitation and yield strength modelling for non-isothermal treatments of a 6061 aluminium alloy

Bardel, D., Perez, M., Nelias, D., Deschamps, A., Hutchinson, C. R., Maisonnette, D., Chaise, T., Gamier, J. & Bourlier, F., 2014, In : Acta Materialia. 62, p. 129 - 140 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Effect of annealing below the crystallization temperature on the corrosion behavior of Al-Ni-Y metallic glasses

Jindal, R., Raja, S., Gibson, M. A., Styles, M. J., Bastow, T. J. & Hutchinson, C., 2014, In : Corrosion Science. 84, p. 54 - 65 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Enhanced recovery and recrystallization of metals due to an applied current

Fabregue, D., Mouawad, B. & Hutchinson, C., 1 Dec 2014, In : Scripta Materialia. 92, p. 3-6 4 p.

Research output: Contribution to journalArticleResearchpeer-review

Mechanical properties of very high strength steel at elevated temperatures

Heidarpour, A., Tofts, N. S., Habibnejad Korayem, A., Zhao, X. L. & Hutchinson, C., 2014, In : Fire Safety Journal. 64, p. 27 - 35 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Quantitative measurements of dynamic precipitation during fatigue of an Al-Zn-Mg-(Cu) alloy using small-angle X-ray scattering

Hutchinson, C., De Geuser, F., Chen, Y. & Deschamps, A., 2014, In : Acta Materialia. 74, p. 96 - 109 14 p.

Research output: Contribution to journalArticleResearchpeer-review

Substitution of Cu and/or Al in eta phase (MgZn2) and the implications for precipitation in Al-Zn-Mg-(Cu) alloys

Styles, M. J., Bastow, T. J., Gibson, M. A. & Hutchinson, C., 2014, In : Intermetallics. 49, p. 40 - 51 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Surface precipitation on engineering alloys

Chen, Y., Fang, X-Y., Brechet, Y. & Hutchinson, C., 2014, In : Acta Materialia. 81, p. 291 - 303 13 p.

Research output: Contribution to journalArticleResearchpeer-review

2013

Quantifying the solute drag effect on ferrite growth in Fe-C-X alloys using controlled decarburization experiments

Qiu, C., Zurob, H. S., Panahi, D., Brechet, Y., Purdy, G. R. & Hutchinson, C., 2013, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 44, 8, p. 3472 - 3483 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Self-consistent model for planar ferrite growth in Fe-C-X alloys

Zurob, H. S., Panahi, D., Hutchinson, C., Brechet, Y. & Purdy, G. R., 2013, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 44, 8, p. 3456 - 3471 16 p.

Research output: Contribution to journalArticleResearchpeer-review

The effect of interrupted aging on the yield strength and uniform elongation of precipitation-hardened Al alloys

Chen, Y., Weyland, M. & Hutchinson, C., 2013, In : Acta Materialia. 61, 15, p. 5877 - 5894 18 p.

Research output: Contribution to journalArticleResearchpeer-review

2012

A study of the composition dependence of the rapid hardening phenomenon in A1-Cu-Mg alloys using diffusion couples

Marceau, R. K. W., Qiu, C., Ringer, S. P. & Hutchinson, C., 2012, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 546, p. 153 - 161 9 p.

Research output: Contribution to journalArticleResearchpeer-review

In situ evaluation of dynamic precipitation during plastic straining of an A1-Zn-Mg-Cu alloy

Deschamps, A., Fribourg, G., Brechet, Y., Chemin, J. L. & Hutchinson, C., 2012, In : Acta Materialia. 60, 5, p. 1905 - 1916 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Metastable pitting characteristics of aluminium alloys measured using current transients during potentiostatic polarisation

Gupta, R., Sukiman, N., Cavanaugh, M., Hinton, B., Hutchinson, C. & Birbilis, N., 2012, In : Electrochimica Acta. 66, p. 245 - 254 10 p.

Research output: Contribution to journalArticleResearchpeer-review