If you made any changes in Pure these will be visible here soon.

Research Output 1997 2019

Filter
Conference Paper
2018

Leak-before-break (LBB) analysis and failure processes for small-diameter cast iron pipes

Jiang, R., Weerasinghe, D., Zhang, C., Zhao, X. L., Kodikara, J. & Hutchinson, C. R., 1 Jan 2018, Tubular Structures XVI - Proceedings of the 16th International Symposium on Tubular Structures, ISTS 2017. Heidarpour, A. & Zhao, X-L. (eds.). CRC Press, p. 625-630 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

2016

Evaluating post-fire mechanical behavior of ultra-high strength (grade1200) steel tubes

Azhari, F., Heidarpour Esfarjani, A., Zhao, X. L. & Hutchinson, C., 2016, Structures in Fire, Proceedings of the Ninth International Conference [(SiF 2016): June 8 to June 10, Princeton University, USA. Garlock, M. E. M. & Kodur, V. K. R. (eds.). Lancaster, Pennsylvania, USA: DEStech Publications, Inc, p. 377-384 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2014

Dynamic interactions between precipitation and plastic deformation in aluminium alloys

Deschamps, A., De Geuser, F., Hutchinson, C., Lee, S. & Horita, Z., 2014, Materials Science Forum: Aluminium Alloys 2014 - ICAA14. Marthisen, K., Holmedal, B. & Li, Y. (eds.). Stafa-Zurich Switzerland: Trans Tech Publications, Vol. 794-796. p. 1133 - 1140 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2013

Anodic polarization behavior of cold worked austenitic stainless steel

Narayanan, S., Revelly, A. K., Kain, V., Samajdar, I., Hutchinson, C. & Palla, S. V., 2013, Advanced Materials Research: A Century of Stainless Steels. Kain, V., Singhal, L. K., Dwivedi, K. P., Easwaran, R., Dey, G. K., Raja, V. S. & Kumar, M. K. (eds.). Stafa-Zurich Switzerland: Trans Tech Publications, Vol. 794. p. 632 - 642 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2012

Dynamic room temperature precipitation during cyclic deformation of an Al-Zn-Mg-Cu alloy

Hutchinson, C., De Geuser, F. & Deschamps, A., 2012, Proceedings of the 13th International Conference on Aluminum Alloys. Weiland, H., Rollett, A. D. & Cassada, W. A. (eds.). New Jersey USA: John Wiley & Sons, p. 1101 - 1106 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Modelling discontinuous dynamic recrystallization using a physically-based model for nucleation

Cram, D. G., Zurob, H. S., Brechet, Y. J. M. & Hutchinson, C. R., 2012, Recrystallization and Grain Growth IV. Palmiere, E. J. & Wynne, B. P. (eds.). p. 492-497 6 p. (Materials Science Forum; vol. 715-716).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

The effect of crystallization state on the corrosion behaviour of Al-Ni-Y glassy alloys

Jindal, R., Srinivasa, R. V., Gibson, M. & Hutchinson, C., 2012, Corrosion Conference and Expo 2012. Moghissi, O. (ed.). Houston TX USA: National Association of Corrosion Engineer (NACE), Vol. 2. p. 913 - 924 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Tools for manipulating precipitation processes: alloy and process design

Hutchinson, C., 2012, TMS 2012 141st Annual Meeting & Exhibition Supplemental Proceedings Volume 2: Materials Properties, Characterization and Modeling. Hoboken NJ USA: John Wiley & Sons, p. 641 - 648 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2011

A comparison of the metastable pitting response of aluminium alloys

Gupta, R. K., Hinton, B. R. W., Hutchinson, C. R. & Birbilis, N., 2011, 18th International Corrosion Congress 2011: 20-24 November 2011; Perth, Australia. Blackburn VIC Australia: Australasian Corrosion Association, Vol. 2. p. 1176-1182 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Kinetic transitions during non-partitioned ferrite growth in Fe-C-Mn alloys

Panahi, D., Bai, Y., Zurob, H. S., Purdy, G. R., Hutchinson, C. R. & Brechet, Y., 2011, Solid-Solid Phase Transformations in Inorganic Materials -International Conference Proceedings: Avignon, France; 6-11 June, 2010. Bréchet, Y., Clouet, E., Deschamps, A., Finel, A. & Soisson, F. (eds.). Switzerland: Trans Tech Publications, p. 539-548 10 p. (Solid State Phenomena; vol. 172-174).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

The effect of precipitate state on the creep performance of Mg-Sn alloys

Gibson, M., Fang, X. Y., Bettles, C. & Hutchinson, C., 2011, Magnesium Technology 2011: Proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS). Silleken, W. H., Agnew, S. R., Neelameggham, N. R. & Mathaudhu, S. N. (eds.). Cham, Switzerland : Springer, p. 227-228 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

2010

Atom probe study of shear-induced dissolution of GP zones in AI-3Cu alloy

Marceau, R., Ringer, S., Da Costa Teixeira, J. & Hutchinson, C., 2010, Proceedings of the 12th International Conference on Aluminium Alloys. Kumai, S., Umezawa, O., Takayama, Y., Tsuchida, T. & Sato, T. (eds.). Japan: Japan Institute of Light Metals, p. 1373 - 1378 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Dynamic precipitation during cyclic deformation in under aged A1-4Cu containing 0' (A12Cu) precipitates

Han, W., Vinogradov, A. & Hutchinson, C., 2010, Proceedings of the 12th International Conference on Aluminium Alloys, September 5-9, 2010, Yokohama, Japan. Kumai, S., Umezawa, O., Takayama, Y., Tsuchida, T. & Sato, T. (eds.). Japan: Japan Institute of Light Metals, p. 1015 - 1020 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Evolution of internal stress during cyclic deformation of AI-4Cu as a function of 0' precipitate state

Han, W., Vinogradov, A. & Hutchinson, C., 2010, Proceedings of the 12th International Conference on Aluminium Alloys, September 5-9, 2010, Yokohama, Japan. Kumai, S., Umezawa, O., Takayama, Y., Tsuchida, T. & Sato, T. (eds.). Japan: Japan Institute of Light Metals, p. 2393 - 2398 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Modelling the crystallization reactions of amorphous precursors in Fe 3B/Nd2Fe14B nanocomposite magnets

Ly, V., Gorsse, S., Suzuki, K. & Hutchinson, C., 2010, Materials Science Forum. Nie, J-F. & Morton, A. (eds.). Switzerland: Trans Tech Publications, Vol. 654-656. p. 1166-1169 4 p. (Materials Science Forum; vol. 654-656).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

The effect of bimodal precipitate distributions on the strength-elongation combinations in A1-Cu alloys

Weyland, M., Hutchinson, C. & Chen, Y., 2010, Proceedings of the 12th International Conference on Aluminium Alloys. Kumai, S., Umezawa, O., Takayama, Y., Tsuchida, T. & Sato, T. (eds.). Japan: Japan Institute of Light Metals, p. 469 - 474 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

The strain hardening behaviour of supersaturated AI-Cu alloys

Da Costa Teixeira, J., Brechet, Y., Estrin, Y. & Hutchinson, C., 2010, Proceedings of the 12th International Conference on Aluminium Alloys. Kumai, S., Takayama, Y., Tsuchida, T. & Sato, T. (eds.). Japan: Japan Institute of Light Metals, p. 536 - 541 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2009

Corrosion resistant medium strength AI-Cu-Mg alloys

Ralston, K. D., Birbilis, N. & Hutchinson, C., 2009, Proceedings of Corrosion and Prevention 2009. Nicholas, D. (ed.). Australia: Australasian Corrosion Association, p. 1 - 8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Corrosion resistant medium strength Al-Cu-Mg alloys

Ralston, K. D., Birbilis, N. & Hutchinson, C. R., 1 Dec 2009, 49th Annual Conference of the Australasian Corrosion Association 2009: Corrosion and Prevention 2009. p. 242-249 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Modelling microstructural evolution and property development in the ARC Centre of Excellence for Design in Light Metals

Hutchinson, C., 2009, Light Metals Technology 2009. Dargusch, M. S. & Keay, S. M. (eds.). Zurich, Switzerland: Trans Tech Publications, Vol. 618-619. p. 195 - 198 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2008

An experimental determination of solute-vacancy binding energies in high purity dilute AI-X alloys

Hutchinson, C., Gable, B. M., Ciccosillo, N., Loo, P., Bastow, T. J. & Hill, A. J., 2008, Aluminium Alloys: Their Physical and Mechanical Properites. Hirsch, P. J., Skrotzki, P. B. & Gottstein, P. G. (eds.). Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, Vol. 1. p. 788 - 794 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Dynamically responding microstructures: a means to simultaneously achieve high strength and high elongation in AI alloys?

Hutchinson, C., Da Costa Teixeira, J. & Bourgeois, L. N., 2008, Aluminium Alloys: Their Physical and Mechanical Properties. Hirsch, P. J., Skrotzki, P. B. & Gottstein, P. G. (eds.). Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, Vol. 2. p. 1647 - 1652 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Quantifying the strain-induced dissolution of shearable precipitates in Al alloys

Loo, P., Bastow, T. J., Hill, A. J., Da Costa Teixeira, J. & Hutchinson, C., 2008, Aluminium Alloys: Their Physical and Mechanical Properties. Hirsch, P. J., Skrotzki, P. B. & Gottstein, P. G. (eds.). Weinhem, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, Vol. 1. p. 751 - 755 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Strategies for increasing the precipitates strengthening in aluminium alloys containing shear resistant plate-shaped precipitates

Da Costa Teixeira, J., Cram, D. G., Bourgeois, L. N. & Hutchinson, C., 2008, Aluminium Alloys: Their Physical and Mechanical Properties. Hirsch, P. J., Skrotzki, P. B. & Gottstein, P. G. (eds.). Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, Vol. 2. p. 1695 - 1700 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

The influence of plate-shaped, shear-resistance precipitates on the work hardening of AI-Cu based alloys: Development of a quantitative description of the y/ u Correlation

Da Costa Teixeira, J., Bourgeois, L. N., Sinclair, C. W. & Hutchinson, C., 2008, Aluminium Alloys: Their Physical and Mechanical Properties. Hirsh, P. J., Skrotzki, P. B. & Gottstein, P. G. (eds.). Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, Vol. 2. p. 16 - 1612 1597 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2007

A design-directed approach to research prioritization in the light alloys

Muddle, B. C. & Hutchinson, C., 2007, Frontiers in the Design of Materials. Raj, B., Ranganathan, S., Mannan, S. L., Sakara Rao, K. B., Mathew, M. D. & Shankar, P. (eds.). London: CRC Press, p. 49 - 58 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

A study of the microstructural evolution and strengthening effects of non-spherical precipitates in an AI-Cu alloy

Da Costa Teixeira, J., Bourgeois, L. N. & Hutchinson, C., 2007, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing. Chang, Y. W., Kim, N. J. & Lee, C. S. (eds.). Switzerland: Trans Tech Publications, Vol. 561-565. p. 2317 - 2320 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

A study of the microstructural evolution and strengthening effects of non-spherical precipitates in an al-cu-based alloy

Teixeira, J. D. C., Bourgeois, L. & Hutchinson, C. R., 1 Dec 2007, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 3 ed. p. 2317-2320 4 p. (Materials Science Forum; vol. 561-565, no. PART 3).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Experimental investigation of isotropic and kinematic hardening in AI-3Cu-0.5Sn (wt%)

Da Costa Teixeira, J., Bourgeois, L. N., Sinclair, C. W. & Hutchinson, C., 2007, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing. Chang, Y. W., Kim, N. J. & Lee, C. S. (eds.). Switzerland: Trans Tech Publications, Vol. 561-565. p. 1849 - 1852 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Experimental investigation of isotropic and kinematic hardening in Al-3Cu-0.05Sn (wt%)

Da Costa Teixeira, J., Bourgeois, L., Sinclair, C. W. & Hutchinson, C. R., 1 Dec 2007, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 3 ed. p. 1849-1852 4 p. (Materials Science Forum; vol. 561-565, no. PART 3).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Novel ionic liquid corrosion-resistant coatings for magnesium

Neil, W. C., Forsyth, M., Howlett, P. C., MacFarlane, D. R., Hutchinson, C. R. & Hinton, B. R. W., 1 Dec 2007, 47th Annual Conference of the Australasian Corrosion Association 2007: Corrosion Control 2007. p. 675-682 8 p. (47th Annual Conference of the Australasian Corrosion Association 2007: Corrosion Control 2007).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

The comparative effectiveness of Nb solute and NbC precipitates at impeding grain boundary motion in Nb-steels

Hutchinson, C., Zurob, H. S., Sinclair, C. W. & Brechet, Y., 2007, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing. Chang, Y. W., Kim, N. J. & Lee, C. S. (eds.). Switzerland: Trans Tech Publications, Vol. 561-565. p. 53 - 56 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2006

Multi-scale structural design and processing for increased strength in aluminium alloys

Muddle, B. C., Nie, J. F. & Hutchinson, C., 2006, Simulation of aluminium shape casting processing: From alloy design to mechanical properties:. Wang, Q., Krane, M. J. M. & Lee, P. D. (eds.). Warrendale, PA, USA: Minerals Metals and Materials Society, p. 3 - 12 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

On the Origin of the Enhanced Creep Resistance in Underaged Al-Cu Based Alloys

Hutchinson, C., Cornall, P. & Goune, M., 2006, Materials Science Forum. Poole, W. J., Wells, M. A. & Lloyd, D. J. (eds.). Switzerland: Trans Tech Publications, Vol. 519. p. 1029 - 1034 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2005

Analysis of Mn Effect on Recrystallization Kinetics in High Nb Steels

Zurob, H. S., Zhu, G., Subramanian, S. V., Purdy, G. R., Hutchinson, C. R. & Brechet, Y., 2005, Materials Science Forum. Rodriguez Ibabe, J. M., Gutierrez, I., Lopez, B. & IzaMendia, I. (eds.). Switzerland: Trans Tech Publications, Vol. 500-501. p. 123 - 130 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

A study of the austenite to ferrite transformation in Fe-C-X alloys using decarburization experiments

Zurob, H. S., Hutchinson, C., Brechet, Y. & Purdy, G. R., 2005, Solid-state phase transformations in inorganic materials. Howe, J. M., Langhlin, D. E., Lee, J. K., Dahmen, U. & Soffa, W. A. (eds.). Warrendale, PA, USA: Minerals Metals & Materials Society, Vol. 1. p. 111 - 116 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Designing non-isothermal heat treatments for precipitation hardening systems: An example of strength optimization in a model Fe-Cu alloy

Goune, M., Redjaimia, A. & Hutchinson, C., 2005, Solid-State Phase Transformation in Inorganic Materials (PTM 2005). Howe, J. M., Laughlin, D. E., Lee, J. K., Dahmen, U. & Soffa, W. A. (eds.). Warrendale, PA, USA: Minerals Metals & Materials Society, Vol. 1. p. 315 - 320 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

The Coupling of Interphase Boundary Migration and Precipitation: Example of a Microalloyed Nb-Containing Steel

Hutchinson, C. R. & Brechet, Y., 2005, Solid State Transformation and Heat Treatment - EUROMAT Publications. Hazotte, A. (ed.). Weinheim Germany: Wiley-VCH Verlag GmbH & Co. KGaA, p. 42 - 52 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2003

Interfacial conditions at the moving interface during growth of ferrite from austenite in Fe-C-(X) alloys

Inden, G. & Hutchinson, C., 2003, Austenite Formation and Decompositon. Damm, E. B. & Merwin, M. J. (eds.). Warrendale, PA, USA: Minerals Metals & Materials Society, p. 65 - 79 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Investigation of the interaction between recovery and precipitation in a model austenitic alloy: Experimental and modelling results

Zurob, H. S., Hutchinson, C., Purdy, G. R. & Brechet, Y., 2003, Austenite Formation and Decompostion. Damm, E. B. & Merwin, M. J. (eds.). Warrendale, PA, USA: Minerals Metals & Materials Society, p. 121 - 138 18 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Solute drag: A review of the force and dissipation approaches to the effect of solute on grain and interphase boundary motions

Hutchinson, C. & Brechet, Y., 2003, Thermodynamics, Microstructures and Plasticity. Finel, A., Maziere, D. & Veron, M. (eds.). The Netherlands: Springer, Vol. 108. p. 155 - 164 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

The diffusional formation of allotriomorphic ferrite from austenite in FE-C-X systems. The simplest case: Fe-C-Ni

Hutchinson, C., Fuchsmann, A., Zurob, H. S. & Brechet, Y., 2003, Austenite Formation and Decomposition. Damm, E. B. & Merwin, M. J. (eds.). Warrendale, PA, USA: Minerals, Metals & Materials Society, p. 49 - 63 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1999

Effects of Si and Ag on precipitation in Al-Cu-M alloys

Hutchinson, C. R., Raviprasad, K. & Ringer, S. P., 1999, Proc. International Conference on Solid-Solid Phase Transformations '99 (JIMIC-3). Tokyo Japan: The Japan Institute of Metals, p. 169 - 172 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Structure of defects in thermomechanically processed Al-Cu-Mg alloys

Raviprasad, K., Hutchinson, C. R. & Ringer, S. P., 1999, Proc. Materials Research Forum 1999: Materials Processing. Melbourne Vic Australia: The Institute of Materials Engineering Australasia, p. 97 - 102 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review