If you made any changes in Pure these will be visible here soon.

Research Output 1997 2019

2014
32 Citations (Scopus)

Mechanical properties of very high strength steel at elevated temperatures

Heidarpour, A., Tofts, N. S., Habibnejad Korayem, A., Zhao, X. L. & Hutchinson, C., 2014, In : Fire Safety Journal. 64, p. 27 - 35 9 p.

Research output: Contribution to journalArticleResearchpeer-review

24 Citations (Scopus)

Quantitative measurements of dynamic precipitation during fatigue of an Al-Zn-Mg-(Cu) alloy using small-angle X-ray scattering

Hutchinson, C., De Geuser, F., Chen, Y. & Deschamps, A., 2014, In : Acta Materialia. 74, p. 96 - 109 14 p.

Research output: Contribution to journalArticleResearchpeer-review

7 Citations (Scopus)

Substitution of Cu and/or Al in eta phase (MgZn2) and the implications for precipitation in Al-Zn-Mg-(Cu) alloys

Styles, M. J., Bastow, T. J., Gibson, M. A. & Hutchinson, C., 2014, In : Intermetallics. 49, p. 40 - 51 12 p.

Research output: Contribution to journalArticleResearchpeer-review

7 Citations (Scopus)

Surface precipitation on engineering alloys

Chen, Y., Fang, X-Y., Brechet, Y. & Hutchinson, C., 2014, In : Acta Materialia. 81, p. 291 - 303 13 p.

Research output: Contribution to journalArticleResearchpeer-review

2013
2 Citations (Scopus)

Anodic polarization behavior of cold worked austenitic stainless steel

Narayanan, S., Revelly, A. K., Kain, V., Samajdar, I., Hutchinson, C. & Palla, S. V., 2013, Advanced Materials Research: A Century of Stainless Steels. Kain, V., Singhal, L. K., Dwivedi, K. P., Easwaran, R., Dey, G. K., Raja, V. S. & Kumar, M. K. (eds.). Stafa-Zurich Switzerland: Trans Tech Publications, Vol. 794. p. 632 - 642 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

32 Citations (Scopus)

Quantifying the solute drag effect on ferrite growth in Fe-C-X alloys using controlled decarburization experiments

Qiu, C., Zurob, H. S., Panahi, D., Brechet, Y., Purdy, G. R. & Hutchinson, C., 2013, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 44, 8, p. 3472 - 3483 12 p.

Research output: Contribution to journalArticleResearchpeer-review

40 Citations (Scopus)

Self-consistent model for planar ferrite growth in Fe-C-X alloys

Zurob, H. S., Panahi, D., Hutchinson, C., Brechet, Y. & Purdy, G. R., 2013, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 44, 8, p. 3456 - 3471 16 p.

Research output: Contribution to journalArticleResearchpeer-review

40 Citations (Scopus)

The effect of interrupted aging on the yield strength and uniform elongation of precipitation-hardened Al alloys

Chen, Y., Weyland, M. & Hutchinson, C., 2013, In : Acta Materialia. 61, 15, p. 5877 - 5894 18 p.

Research output: Contribution to journalArticleResearchpeer-review

2012
22 Citations (Scopus)

A study of the composition dependence of the rapid hardening phenomenon in A1-Cu-Mg alloys using diffusion couples

Marceau, R. K. W., Qiu, C., Ringer, S. P. & Hutchinson, C., 2012, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 546, p. 153 - 161 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Dynamic room temperature precipitation during cyclic deformation of an Al-Zn-Mg-Cu alloy

Hutchinson, C., De Geuser, F. & Deschamps, A., 2012, Proceedings of the 13th International Conference on Aluminum Alloys. Weiland, H., Rollett, A. D. & Cassada, W. A. (eds.). New Jersey USA: John Wiley & Sons, p. 1101 - 1106 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

70 Citations (Scopus)

In situ evaluation of dynamic precipitation during plastic straining of an A1-Zn-Mg-Cu alloy

Deschamps, A., Fribourg, G., Brechet, Y., Chemin, J. L. & Hutchinson, C., 2012, In : Acta Materialia. 60, 5, p. 1905 - 1916 12 p.

Research output: Contribution to journalArticleResearchpeer-review

72 Citations (Scopus)

Metastable pitting characteristics of aluminium alloys measured using current transients during potentiostatic polarisation

Gupta, R., Sukiman, N., Cavanaugh, M., Hinton, B., Hutchinson, C. & Birbilis, N., 2012, In : Electrochimica Acta. 66, p. 245 - 254 10 p.

Research output: Contribution to journalArticleResearchpeer-review

1 Citation (Scopus)

Modelling discontinuous dynamic recrystallization using a physically-based model for nucleation

Cram, D. G., Zurob, H. S., Brechet, Y. J. M. & Hutchinson, C. R., 2012, Recrystallization and Grain Growth IV. Palmiere, E. J. & Wynne, B. P. (eds.). p. 492-497 6 p. (Materials Science Forum; vol. 715-716).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

2 Citations (Scopus)

Strong interaction of an Al2Cu intermetallic precipitate with its boundary

Bastow, T. J., Hutchinson, C. & Hill, A., 2012, In : Philosophical Magazine. 92, 16, p. 2022 - 2031 10 p.

Research output: Contribution to journalArticleResearchpeer-review

2 Citations (Scopus)
40 Citations (Scopus)

The coexistence of two S (Al2CuMg) phases in Al-Cu-Mg alloys

Styles, M. J., Hutchinson, C., Chen, Y., Deschamps, A. & Bastow, T. J., 2012, In : Acta Materialia. 60, 20, p. 6940 - 6951 12 p.

Research output: Contribution to journalArticleResearchpeer-review

The effect of crystallization state on the corrosion behaviour of Al-Ni-Y glassy alloys

Jindal, R., Srinivasa, R. V., Gibson, M. & Hutchinson, C., 2012, Corrosion Conference and Expo 2012. Moghissi, O. (ed.). Houston TX USA: National Association of Corrosion Engineer (NACE), Vol. 2. p. 913 - 924 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

44 Citations (Scopus)

The effect of solute on discontinuous dynamic recrystallization

Cram, D. G., Fang, X-Y., Zurob, H. S., Brechet, Y. & Hutchinson, C., 2012, In : Acta Materialia. 60, 18, p. 6390 - 6404 15 p.

Research output: Contribution to journalArticleResearchpeer-review

Tools for manipulating precipitation processes: alloy and process design

Hutchinson, C., 2012, TMS 2012 141st Annual Meeting & Exhibition Supplemental Proceedings Volume 2: Materials Properties, Characterization and Modeling. Hoboken NJ USA: John Wiley & Sons, p. 641 - 648 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

29 Citations (Scopus)

Vacancy behavior and solute cluster growth during natural aging of an Al-Mg-Si alloy

Lay, M. D. H., Zurob, H. S., Hutchinson, C., Bastow, T. J. & Hill, A., 2012, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 43A, 12, p. 4507 - 4513 7 p.

Research output: Contribution to journalArticleResearchpeer-review

2011

A comparison of the metastable pitting response of aluminium alloys

Gupta, R. K., Hinton, B. R. W., Hutchinson, C. R. & Birbilis, N., 2011, 18th International Corrosion Congress 2011: 20-24 November 2011; Perth, Australia. Blackburn VIC Australia: Australasian Corrosion Association, Vol. 2. p. 1176-1182 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

51 Citations (Scopus)

ALEMI: A ten-year history of discussions of alloying-element interactions with migrating interfaces

Purdy, G., Agren, J., Borgenstam, A., Brechet, Y., Enomoto, M., Furuhara, T., Gamsjager, E., Goune, M., Hillert, M., Hutchinson, C., Militzer, M. & Zurob, H., 2011, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 42A, 12, p. 3703 - 3718 16 p.

Research output: Contribution to journalArticleResearchpeer-review

42 Citations (Scopus)

Corrosion of heat treated magnesium alloy ZE41

Neil, W., Forsyth, M., Howlett, P., Hutchinson, C. & Hinton, B., 2011, In : Corrosion Science. 53, 10, p. 3299 - 3308 10 p.

Research output: Contribution to journalArticleResearchpeer-review

24 Citations (Scopus)

Dynamic precipitation during cyclic deformation of an underaged A1-Cu alloy

Han, W., Chen, Y., Vinogradov, A. & Hutchinson, C., 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 528, 24, p. 7410 - 7416 7 p.

Research output: Contribution to journalArticleResearchpeer-review

48 Citations (Scopus)

In situ evaluation of the microstructure evolution during rapid hardening of an A1-2.5Cu-1.5Mg (wt.%) alloy

Deschamps, A., Bastow, T., De Geuser, F., Hill, A. & Hutchinson, C., 2011, In : Acta Materialia. 59, 8, p. 2918 - 2927 10 p.

Research output: Contribution to journalArticleResearchpeer-review

3 Citations (Scopus)

Kinetic transitions during non-partitioned ferrite growth in Fe-C-Mn alloys

Panahi, D., Bai, Y., Zurob, H. S., Purdy, G. R., Hutchinson, C. R. & Brechet, Y., 2011, Solid-Solid Phase Transformations in Inorganic Materials -International Conference Proceedings: Avignon, France; 6-11 June, 2010. Bréchet, Y., Clouet, E., Deschamps, A., Finel, A. & Soisson, F. (eds.). Switzerland: Trans Tech Publications, p. 539-548 10 p. (Solid State Phenomena; vol. 172-174).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

30 Citations (Scopus)

On the reversibility of dislocation slip during cyclic deformation of A1 alloys containing shear-resistant particles

Han, W., Vinogradov, A. & Hutchinson, C., 2011, In : Acta Materialia. 59, 9, p. 3720 - 3736 17 p.

Research output: Contribution to journalArticleResearchpeer-review

42 Citations (Scopus)

Quantitative atom probe analysis of nanostructure containing clusters and precipitates with multiple length scales

Marceau, R., Stephenson, L., Hutchinson, C. & Ringer, S., 2011, In : Ultramicroscopy. 111, 6, p. 738 - 742 5 p.

Research output: Contribution to journalArticleResearchpeer-review

The effect of precipitate state on the creep performance of Mg-Sn alloys

Gibson, M., Fang, X. Y., Bettles, C. & Hutchinson, C., 2011, Magnesium Technology 2011: Proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS). Silleken, W. H., Agnew, S. R., Neelameggham, N. R. & Mathaudhu, S. N. (eds.). Cham, Switzerland : Springer, p. 227-228 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

2010

Atom probe study of shear-induced dissolution of GP zones in AI-3Cu alloy

Marceau, R., Ringer, S., Da Costa Teixeira, J. & Hutchinson, C., 2010, Proceedings of the 12th International Conference on Aluminium Alloys. Kumai, S., Umezawa, O., Takayama, Y., Tsuchida, T. & Sato, T. (eds.). Japan: Japan Institute of Light Metals, p. 1373 - 1378 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Dynamic precipitation during cyclic deformation in under aged A1-4Cu containing 0' (A12Cu) precipitates

Han, W., Vinogradov, A. & Hutchinson, C., 2010, Proceedings of the 12th International Conference on Aluminium Alloys, September 5-9, 2010, Yokohama, Japan. Kumai, S., Umezawa, O., Takayama, Y., Tsuchida, T. & Sato, T. (eds.). Japan: Japan Institute of Light Metals, p. 1015 - 1020 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Evolution of internal stress during cyclic deformation of AI-4Cu as a function of 0' precipitate state

Han, W., Vinogradov, A. & Hutchinson, C., 2010, Proceedings of the 12th International Conference on Aluminium Alloys, September 5-9, 2010, Yokohama, Japan. Kumai, S., Umezawa, O., Takayama, Y., Tsuchida, T. & Sato, T. (eds.). Japan: Japan Institute of Light Metals, p. 2393 - 2398 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)

Mesoscale simulations of the kinetics of solid-solid phase transformations: Selecting the relevant interfacial compositions for shape-preserved growth

Hutchinson, C. & Zurob, H., 2010, In : Comptes Rendus Physique. 11, 3-4, p. 257 - 264 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Modeling the kinetics of precipitation processes in aluminium alloys

Hutchinson, C., 2010, Fundamentals of aluminium metallurgy: Production, processing and applications. Lumley, R. (ed.). UK: Woodhead Publishing Limited, p. 422 - 467 46 p.

Research output: Chapter in Book/Report/Conference proceedingChapter (Book)Researchpeer-review

Modelling the crystallization reactions of amorphous precursors in Fe 3B/Nd2Fe14B nanocomposite magnets

Ly, V., Gorsse, S., Suzuki, K. & Hutchinson, C., 2010, Materials Science Forum. Nie, J-F. & Morton, A. (eds.). Switzerland: Trans Tech Publications, Vol. 654-656. p. 1166-1169 4 p. (Materials Science Forum; vol. 654-656).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

The effect of bimodal precipitate distributions on the strength-elongation combinations in A1-Cu alloys

Weyland, M., Hutchinson, C. & Chen, Y., 2010, Proceedings of the 12th International Conference on Aluminium Alloys. Kumai, S., Umezawa, O., Takayama, Y., Tsuchida, T. & Sato, T. (eds.). Japan: Japan Institute of Light Metals, p. 469 - 474 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

83 Citations (Scopus)

The effect of precipitate size on the yield strength-pitting corrosion correlation in Al-Cu-Mg alloys

Ralston, K., Birbilis, N., Weyland, M. & Hutchinson, C., 2010, In : Acta Materialia. 58, 18, p. 5941 - 5948 8 p.

Research output: Contribution to journalArticleResearchpeer-review

68 Citations (Scopus)

The effect of precipitate state on the creep resistance of Mg-Sn alloys

Gibson, M., Fang, X-Y., Bettles, C. & Hutchinson, C., 2010, In : Scripta Materialia. 63, 8, p. 899 - 902 4 p.

Research output: Contribution to journalArticleResearchpeer-review

The strain hardening behaviour of supersaturated AI-Cu alloys

Da Costa Teixeira, J., Brechet, Y., Estrin, Y. & Hutchinson, C., 2010, Proceedings of the 12th International Conference on Aluminium Alloys. Kumai, S., Takayama, Y., Tsuchida, T. & Sato, T. (eds.). Japan: Japan Institute of Light Metals, p. 536 - 541 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2009
1 Citation (Scopus)

Corrosion of a new class of solid solution Al alloys

Quirk, S. E., Birbilis, N., Cavanaugh, M. K., Hutchinson, C. R., Da Costa Teixeira, J. & Ringer, S. P., 23 Nov 2009, In : ECS Transactions. 16, 32, p. 73-80 8 p.

Research output: Contribution to journalConference articleOther

113 Citations (Scopus)

Corrosion of magnesium alloy ZE41 - The role of microstructural features

Neil, W., Forsyth, M., Howlett, P. C., Hutchinson, C. & Hinton, B. R. W., 2009, In : Corrosion Science. 51, 2, p. 387 - 394 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Corrosion resistant medium strength AI-Cu-Mg alloys

Ralston, K. D., Birbilis, N. & Hutchinson, C., 2009, Proceedings of Corrosion and Prevention 2009. Nicholas, D. (ed.). Australia: Australasian Corrosion Association, p. 1 - 8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Corrosion resistant medium strength Al-Cu-Mg alloys

Ralston, K. D., Birbilis, N. & Hutchinson, C. R., 1 Dec 2009, 49th Annual Conference of the Australasian Corrosion Association 2009: Corrosion and Prevention 2009. p. 242-249 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

51 Citations (Scopus)

Kinetic transitions during non-partitioned ferrite growth in Fe-C-X alloys

Zurob, H. S., Hutchinson, C., Brechet, Y., Seyedrezai, H. & Purdy, G. R., 2009, In : Acta Materialia. 57, 9, p. 2781 - 2792 12 p.

Research output: Contribution to journalArticleResearchpeer-review

105 Citations (Scopus)

Modelling discontinuous dynamic recrystallization using a physically based model for nucleation

Cram, D. G., Zurob, H. S., Brechet, Y. & Hutchinson, C. R., 2009, In : Acta Materialia. 57, 17, p. 5218 - 5228 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Modelling microstructural evolution and property development in the ARC Centre of Excellence for Design in Light Metals

Hutchinson, C., 2009, Light Metals Technology 2009. Dargusch, M. S. & Keay, S. M. (eds.). Zurich, Switzerland: Trans Tech Publications, Vol. 618-619. p. 195 - 198 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

7 Citations (Scopus)

On the effect of pre-recovery on subsequent recrystallization

Brechet, Y., Zurob, H. S. & Hutchinson, C., 2009, In : International Journal of Materials Research. 100, 10, p. 1446 - 1448 3 p.

Research output: Contribution to journalArticleResearchpeer-review

40 Citations (Scopus)

Quantifying the strain-induced dissolution of precipitates in Al alloy microstructures using nuclear magnetic resonance

Hutchinson, C., Loo, P. T., Bastow, T. J., Hill, A. & Da Costa Teixeira, J., 2009, In : Acta Materialia. 57, 19, p. 5645 - 5653 9 p.

Research output: Contribution to journalArticleResearchpeer-review

61 Citations (Scopus)

The effect of shear-resistant, plate-shaped precipitates on the work hardening of Al alloys: Towards a prediction of the strength-elongation correlation

Da Costa Teixeira, J., Bourgeois, L. N., Sinclair, C. W. & Hutchinson, C. R., 2009, In : Acta Materialia. 57, 20, p. 6075 - 6089 15 p.

Research output: Contribution to journalArticleResearchpeer-review

2008

An experimental determination of solute-vacancy binding energies in high purity dilute AI-X alloys

Hutchinson, C., Gable, B. M., Ciccosillo, N., Loo, P., Bastow, T. J. & Hill, A. J., 2008, Aluminium Alloys: Their Physical and Mechanical Properites. Hirsch, P. J., Skrotzki, P. B. & Gottstein, P. G. (eds.). Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, Vol. 1. p. 788 - 794 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review