If you made any changes in Pure these will be visible here soon.

Research Output 1997 2019

29 Citations (Scopus)

A comparison of EDS microanalysis in FIB-prepared and electropolished TEM thin foils

Hutchinson, C., Hackenberg, R. E. & Shiflet, G. J., 2003, In : Ultramicroscopy. 94, 1, p. 37 - 48 12 p.

Research output: Contribution to journalArticleResearchpeer-review

7 Citations (Scopus)

A comparison of ferrite growth kinetics under denitriding and decarburizing conditions

Guo, M., Panahi, D., Van Landeghem, H., Hutchinson, C. R., Purdy, G. & Zurob, H. S., Jun 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 46A, 6, p. 2449-2454 6 p.

Research output: Contribution to journalArticleResearchpeer-review

A comparison of the metastable pitting response of aluminium alloys

Gupta, R. K., Hinton, B. R. W., Hutchinson, C. R. & Birbilis, N., 2011, 18th International Corrosion Congress 2011: 20-24 November 2011; Perth, Australia. Blackburn VIC Australia: Australasian Corrosion Association, Vol. 2. p. 1176-1182 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

85 Citations (Scopus)

Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys

Gorsse, S., Hutchinson, C., Gouné, M. & Banerjee, R., 31 Dec 2017, In : Science and Technology of Advanced Materials. 18, 1, p. 584-610 27 p.

Research output: Contribution to journalReview ArticleResearchpeer-review

Open Access
File

A design-directed approach to research prioritization in the light alloys

Muddle, B. C. & Hutchinson, C., 2007, Frontiers in the Design of Materials. Raj, B., Ranganathan, S., Mannan, S. L., Sakara Rao, K. B., Mathew, M. D. & Shankar, P. (eds.). London: CRC Press, p. 49 - 58 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

12 Citations (Scopus)

Advanced high strength steel (AHSS) development through chemical patterning of austenite

Sun, W. W., Wu, Y. X., Yang, S. C. & Hutchinson, C. R., 15 Mar 2018, In : Scripta Materialia. 146, p. 60-63 4 p.

Research output: Contribution to journalArticleResearchpeer-review

51 Citations (Scopus)

ALEMI: A ten-year history of discussions of alloying-element interactions with migrating interfaces

Purdy, G., Agren, J., Borgenstam, A., Brechet, Y., Enomoto, M., Furuhara, T., Gamsjager, E., Goune, M., Hillert, M., Hutchinson, C., Militzer, M. & Zurob, H., 2011, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 42A, 12, p. 3703 - 3718 16 p.

Research output: Contribution to journalArticleResearchpeer-review

A multiscale adaptive mesh refinement approach to architectured steel specification in the design of a frameless stressed skin structure

Nicholas, P., Stasiuk, D., Norgaard, E. C., Hutchinson, C. & Thomsen, M. R., 2015, Modelling Behaviour: Design Modelling Symposium 2015. Thomsen, M. R., Tamke, M., Gengnagel, C., Faircloth, B. & Scheurer, F. (eds.). Switzerland: Springer, p. 17 - 34 18 p.

Research output: Chapter in Book/Report/Conference proceedingChapter (Book)Researchpeer-review

2 Citations (Scopus)

Analysis of Mn Effect on Recrystallization Kinetics in High Nb Steels

Zurob, H. S., Zhu, G., Subramanian, S. V., Purdy, G. R., Hutchinson, C. R. & Brechet, Y., 2005, Materials Science Forum. Rodriguez Ibabe, J. M., Gutierrez, I., Lopez, B. & IzaMendia, I. (eds.). Switzerland: Trans Tech Publications, Vol. 500-501. p. 123 - 130 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

40 Citations (Scopus)

Analysis of the effect of Mn on the recrystallization kinetics of high Nb steel: An example of physically-based alloy design

Zurob, H. S., Zhu, G., Subramanian, S. V., Purdy, G. R., Hutchinson, C. R. & Brechet, Y., 2005, In : ISIJ International. 45, 5, p. 713 - 722 9 p.

Research output: Contribution to journalArticleResearchpeer-review

225 Citations (Scopus)

An enhanced age hardening response in Mg-Sn based alloys containing Zn

Mendis, C. L., Bettles, C. J., Gibson, M. A. & Hutchinson, C., 2006, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 435-436, p. 163 - 171 9 p.

Research output: Contribution to journalArticleResearchpeer-review

An experimental determination of solute-vacancy binding energies in high purity dilute AI-X alloys

Hutchinson, C., Gable, B. M., Ciccosillo, N., Loo, P., Bastow, T. J. & Hill, A. J., 2008, Aluminium Alloys: Their Physical and Mechanical Properites. Hirsch, P. J., Skrotzki, P. B. & Gottstein, P. G. (eds.). Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, Vol. 1. p. 788 - 794 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2 Citations (Scopus)

Anodic polarization behavior of cold worked austenitic stainless steel

Narayanan, S., Revelly, A. K., Kain, V., Samajdar, I., Hutchinson, C. & Palla, S. V., 2013, Advanced Materials Research: A Century of Stainless Steels. Kain, V., Singhal, L. K., Dwivedi, K. P., Easwaran, R., Dey, G. K., Raja, V. S. & Kumar, M. K. (eds.). Stafa-Zurich Switzerland: Trans Tech Publications, Vol. 794. p. 632 - 642 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

30 Citations (Scopus)

A novel experimental approach to identifying kinetic transitions in solid state phase transformations

Hutchinson, C. R., Fuchsmann, A., Zurob, H. S. & Brechet, Y., 2004, In : Scripta Materialia. 50, 2, p. 285 - 289 5 p.

Research output: Contribution to journalArticleResearchpeer-review

7 Citations (Scopus)

Assembly of nanoparticles-polyelectrolyte complexes in nanofiber cellulose structures

Garusinghe, U. M., Raghuwanshi, V. S., Garvey, C. J., Varanasi, S., Hutchinson, C. R., Batchelor, W. & Garnier, G., 5 Jan 2017, In : Colloids and Surfaces A: Physicohemical and Engineering Aspects. 513, p. 373-379 7 p.

Research output: Contribution to journalArticleResearchpeer-review

4 Citations (Scopus)

A study of the austenite to ferrite transformation in Fe-C-X alloys using decarburization experiments

Zurob, H. S., Hutchinson, C., Brechet, Y. & Purdy, G. R., 2005, Solid-state phase transformations in inorganic materials. Howe, J. M., Langhlin, D. E., Lee, J. K., Dahmen, U. & Soffa, W. A. (eds.). Warrendale, PA, USA: Minerals Metals & Materials Society, Vol. 1. p. 111 - 116 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

22 Citations (Scopus)

A study of the composition dependence of the rapid hardening phenomenon in A1-Cu-Mg alloys using diffusion couples

Marceau, R. K. W., Qiu, C., Ringer, S. P. & Hutchinson, C., 2012, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 546, p. 153 - 161 9 p.

Research output: Contribution to journalArticleResearchpeer-review

A study of the microstructural evolution and strengthening effects of non-spherical precipitates in an AI-Cu alloy

Da Costa Teixeira, J., Bourgeois, L. N. & Hutchinson, C., 2007, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing. Chang, Y. W., Kim, N. J. & Lee, C. S. (eds.). Switzerland: Trans Tech Publications, Vol. 561-565. p. 2317 - 2320 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

A study of the microstructural evolution and strengthening effects of non-spherical precipitates in an al-cu-based alloy

Teixeira, J. D. C., Bourgeois, L. & Hutchinson, C. R., 1 Dec 2007, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 3 ed. p. 2317-2320 4 p. (Materials Science Forum; vol. 561-565, no. PART 3).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

76 Citations (Scopus)

A Thermodynamic Assessment of the Mg-Nd Binary System using Random Solution and Associate Models for the liquid Phase

Gorsse, S., Hutchinson, C. R., Chevalier, B. & Nie, J. F., 2005, In : Journal of Alloys and Compounds. 392, 1-Feb, p. 253 - 262 10 p.

Research output: Contribution to journalArticleResearchpeer-review

14 Citations (Scopus)

A three-dimensional characterization of creep void formation in hydrogen reformer tubes

Wahab, A. A., Hutchinson, C. & Kral, M. V., 2006, In : Scripta Materialia. 55, 1, p. 69 - 73 5 p.

Research output: Contribution to journalArticleResearchpeer-review

Atom probe study of shear-induced dissolution of GP zones in AI-3Cu alloy

Marceau, R., Ringer, S., Da Costa Teixeira, J. & Hutchinson, C., 2010, Proceedings of the 12th International Conference on Aluminium Alloys. Kumai, S., Umezawa, O., Takayama, Y., Tsuchida, T. & Sato, T. (eds.). Japan: Japan Institute of Light Metals, p. 1373 - 1378 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

61 Citations (Scopus)

A transition from local equilibrium to paraequilibrium kinetics for ferrite growth in Fe-C-Mn: A possible role of interfacial segregation

Zurob, H. S., Hutchinson, C., Beche, A., Purdy, G. R. & Brechet, Y., 2008, In : Acta Materialia. 56, p. 2203 - 2211 9 p.

Research output: Contribution to journalArticleResearchpeer-review

3 Citations (Scopus)

Cementite coarsening during the tempering of Fe-C-Mn martensite

Wu, Y. X., Sun, W. W., Styles, M. J., Arlazarov, A. & Hutchinson, C. R., 15 Oct 2018, In : Acta Materialia. 159, p. 209-224 16 p.

Research output: Contribution to journalArticleResearchpeer-review

5 Citations (Scopus)

Classification of major cohorts of Australian pressurised cast iron water mains for pipe renewal

Jiang, R., Shannon, B., Deo, R. N., Rathnayaka, S., Hutchinson, C. R., Zhao, X. L. & Kodikara, J., 2017, In : Australian Journal of Water Resources. 21, 2, p. 77-88 12 p.

Research output: Contribution to journalArticleResearchpeer-review

1 Citation (Scopus)

Clustering and Precipitation Processes in Microalloyed Aluminium Alloys

Ringer, S. P., Hutchinson, C. R., Hono, K., Polmear, I. J. & Sakurai, T., 1997, In : Science Reports of the Research Institutes, Tohoku University, Series A: Physics, Chemistry and Metallurgy. p. 241 - 251 11 p.

Research output: Contribution to journalArticleResearchpeer-review

1 Citation (Scopus)

Corrosion of a new class of solid solution Al alloys

Quirk, S. E., Birbilis, N., Cavanaugh, M. K., Hutchinson, C. R., Da Costa Teixeira, J. & Ringer, S. P., 23 Nov 2009, In : ECS Transactions. 16, 32, p. 73-80 8 p.

Research output: Contribution to journalConference articleOther

42 Citations (Scopus)

Corrosion of heat treated magnesium alloy ZE41

Neil, W., Forsyth, M., Howlett, P., Hutchinson, C. & Hinton, B., 2011, In : Corrosion Science. 53, 10, p. 3299 - 3308 10 p.

Research output: Contribution to journalArticleResearchpeer-review

113 Citations (Scopus)

Corrosion of magnesium alloy ZE41 - The role of microstructural features

Neil, W., Forsyth, M., Howlett, P. C., Hutchinson, C. & Hinton, B. R. W., 2009, In : Corrosion Science. 51, 2, p. 387 - 394 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Corrosion resistant medium strength AI-Cu-Mg alloys

Ralston, K. D., Birbilis, N. & Hutchinson, C., 2009, Proceedings of Corrosion and Prevention 2009. Nicholas, D. (ed.). Australia: Australasian Corrosion Association, p. 1 - 8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Corrosion resistant medium strength Al-Cu-Mg alloys

Ralston, K. D., Birbilis, N. & Hutchinson, C. R., 1 Dec 2009, 49th Annual Conference of the Australasian Corrosion Association 2009: Corrosion and Prevention 2009. p. 242-249 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

36 Citations (Scopus)

Corrosion-wear of β-Ti alloy TMZF (Ti-12Mo-6Zr-2Fe) in simulated body fluid

Yang, X. & Hutchinson, C. R., 15 Sep 2016, In : Acta Biomaterialia. 42, p. 429-439 11 p.

Research output: Contribution to journalArticleResearchpeer-review

62 Citations (Scopus)

Coupled precipitation and yield strength modelling for non-isothermal treatments of a 6061 aluminium alloy

Bardel, D., Perez, M., Nelias, D., Deschamps, A., Hutchinson, C. R., Maisonnette, D., Chaise, T., Gamier, J. & Bourlier, F., 2014, In : Acta Materialia. 62, p. 129 - 140 12 p.

Research output: Contribution to journalArticleResearchpeer-review

7 Citations (Scopus)

Coupled solute drag and transformation stasis during ferrite formation in Fe-C-Mn-Mo

Sun, W. W., Zurob, H. S. & Hutchinson, C. R., 15 Oct 2017, In : Acta Materialia. 139, p. 62-74 13 p.

Research output: Contribution to journalArticleResearchpeer-review

12 Citations (Scopus)

Defect-induced dynamic pattern formation in metals and alloys

Brechet, Y. & Hutchinson, C., 2006, In : Solid State Physics-Advances in Research and Applications. 60, p. 181 - 287 107 p.

Research output: Contribution to journalArticleResearchpeer-review

Designing non-isothermal heat treatments for precipitation hardening systems: An example of strength optimization in a model Fe-Cu alloy

Goune, M., Redjaimia, A. & Hutchinson, C., 2005, Solid-State Phase Transformation in Inorganic Materials (PTM 2005). Howe, J. M., Laughlin, D. E., Lee, J. K., Dahmen, U. & Soffa, W. A. (eds.). Warrendale, PA, USA: Minerals Metals & Materials Society, Vol. 1. p. 315 - 320 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Diffusion and Phase Transformations in Steels: A Tool for Experimentation and a Method for Modelling

Brechet, Y., Hutchinson, C., Purdy, G. R. & Zurob, H. S., 2006, In : Diffusion and Defect Data. Pt A Defect and Diffusion Forum. 249, p. 239 - 246 8 p.

Research output: Contribution to journalArticleResearchpeer-review

Dynamically responding microstructures: a means to simultaneously achieve high strength and high elongation in AI alloys?

Hutchinson, C., Da Costa Teixeira, J. & Bourgeois, L. N., 2008, Aluminium Alloys: Their Physical and Mechanical Properties. Hirsch, P. J., Skrotzki, P. B. & Gottstein, P. G. (eds.). Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, Vol. 2. p. 1647 - 1652 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Dynamic interactions between precipitation and plastic deformation in aluminium alloys

Deschamps, A., De Geuser, F., Hutchinson, C., Lee, S. & Horita, Z., 2014, Materials Science Forum: Aluminium Alloys 2014 - ICAA14. Marthisen, K., Holmedal, B. & Li, Y. (eds.). Stafa-Zurich Switzerland: Trans Tech Publications, Vol. 794-796. p. 1133 - 1140 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Dynamic precipitation during cyclic deformation in under aged A1-4Cu containing 0' (A12Cu) precipitates

Han, W., Vinogradov, A. & Hutchinson, C., 2010, Proceedings of the 12th International Conference on Aluminium Alloys, September 5-9, 2010, Yokohama, Japan. Kumai, S., Umezawa, O., Takayama, Y., Tsuchida, T. & Sato, T. (eds.). Japan: Japan Institute of Light Metals, p. 1015 - 1020 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

24 Citations (Scopus)

Dynamic precipitation during cyclic deformation of an underaged A1-Cu alloy

Han, W., Chen, Y., Vinogradov, A. & Hutchinson, C., 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 528, 24, p. 7410 - 7416 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Dynamic room temperature precipitation during cyclic deformation of an Al-Zn-Mg-Cu alloy

Hutchinson, C., De Geuser, F. & Deschamps, A., 2012, Proceedings of the 13th International Conference on Aluminum Alloys. Weiland, H., Rollett, A. D. & Cassada, W. A. (eds.). New Jersey USA: John Wiley & Sons, p. 1101 - 1106 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

24 Citations (Scopus)

Effect of annealing below the crystallization temperature on the corrosion behavior of Al-Ni-Y metallic glasses

Jindal, R., Raja, S., Gibson, M. A., Styles, M. J., Bastow, T. J. & Hutchinson, C., 2014, In : Corrosion Science. 84, p. 54 - 65 12 p.

Research output: Contribution to journalArticleResearchpeer-review

1 Citation (Scopus)

Effect of C and N and their absence on the kinetics of austenite-ferrite phase transformations in Fe-0.5Mn alloy

Farahani, H., Zurob, H., Hutchinson, C. R. & van der Zwaag, S., 15 May 2018, In : Acta Materialia. 150, p. 224-235 12 p.

Research output: Contribution to journalArticleResearchpeer-review

8 Citations (Scopus)

Effect of creep strain on mechanical behaviour of ultra-high strength (Grade 1200) steel subject to cooling phase of a fire

Azhari, F., Heidarpour, A., Zhao, X-L. & Hutchinson, C. R., 1 Apr 2017, In : Construction and Building Materials. 136, p. 18-30 13 p.

Research output: Contribution to journalArticleResearchpeer-review

2 Citations (Scopus)

Effect of Nb on ferrite recrystallitzation and austenite decomposition in microalloyed steels

Brechet, Y., Hutchinson, C., Zurob, H. S. & Sinclair, C. W., 2007, In : Steel Research International. 78, 3, p. 210 - 215 6 p.

Research output: Contribution to journalArticleResearchpeer-review

22 Citations (Scopus)

Effect of strain ageing on the mechanical properties of partially damaged structural mild steel

Hosseini, S. S., Heidarpour, A., Collins, F. G. & Hutchinson, C., 2015, In : Construction and Building Materials. 77, p. 83 - 93 11 p.

Research output: Contribution to journalArticleResearchpeer-review

27 Citations (Scopus)

Effect of weld on the mechanical properties of high strength and ultra-high strength steel tubes in fabricated hybrid sections

Javidan, F., Heidarpour, A., Zhao, X-L., Hutchinson, C. R. & Minkkinen, J., 1 Jul 2016, In : Engineering Structures. 118, p. 16-27 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Effects of Si and Ag on precipitation in Al-Cu-M alloys

Hutchinson, C. R., Raviprasad, K. & Ringer, S. P., 1999, Proc. International Conference on Solid-Solid Phase Transformations '99 (JIMIC-3). Tokyo Japan: The Japan Institute of Metals, p. 169 - 172 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

13 Citations (Scopus)

Enhanced recovery and recrystallization of metals due to an applied current

Fabregue, D., Mouawad, B. & Hutchinson, C., 1 Dec 2014, In : Scripta Materialia. 92, p. 3-6 4 p.

Research output: Contribution to journalArticleResearchpeer-review