If you made any changes in Pure these will be visible here soon.

Research Output 1990 2019

Filter
Conference Paper
1994
3 Citations (Scopus)

Extrusion of metal matrix composites-modelling and experiments

Davies, C. H. J., Chen, W. C., Samarasekera, I. V., Hawbolt, E. B. & Brimacombe, J. K., 1 Jan 1994, Proceedings of the Symposium on High Performance Metal and Ceramic Matrix Composites. Upadhya, K. (ed.). The Minerals, Metals & Materials Society, p. 195-202 8 p. (Proceedings of the Symposium on High Performance Metal and Ceramic Matrix Composites).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

1997

Microstructural Changes in 0.5Cr-0.5Mo-0.25V Steel During Ageing

Zheng, R. Q., Davies, C. H., Mann, S. D. & Muddle, B. C., 1997, Materials Research Forum 1997: Materials Conservation. Melbourne Vic Australia: Institute of Metals and Materials Australasia Ltd, p. 127 - 130 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1999

Evolution of microstructure and mechanical properties in a heavy section size Mn-Mo-Cu austempered ductile iron

Zahiri, S. H., Pereloma, E. V. & Davies, C. H. J., 1999, Materials Research Forum '99: Materials Processing. Melbourne Vic Australia: The Institute of Materials Engineering Australasia, p. 41 - 46 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2000
2 Citations (Scopus)

The cellular automaton simulation of microstructural evolution during deformation processing of metals

Davies, C. H. J., 2000, Multiscale Phenomena in Materials - Experiments and Modeling. Warrendale PA USA: Materials Research Socity, p. 457 - 468 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2001

A flexible learning studio for materials science and engineering education

Davies, C. H. J., Finlayson, T. R. & Hines, P. J., 2001, Journal of Materials Education. Baglin, J. E. (ed.). University of North Texas USA: Materials Research Council, Vol. 23. p. 41 - 50 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Calibrating Simulations: The uses and limitations of EBSD Experiments

Hong, L., Sivaprasad, P. & Davies, C. H. J., 2001, Engineering Materials 2001. Pereloma, E. V. & Krishnamurthy, R. (eds.). Melbourne Vic Australia: The Institute of Materials Engineering Australasia, p. ii/51 - ii/56 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Examination of a Model for Prediction of the Processing Window for a Mn, Mo, Cu Austempered Ductile Iron

Zahiri, H., Pereloma, E. V. & Davies, C. H. J., 2001, Engineering Materials 2001. Pereloma, E. V. & Raviprasad, K. (eds.). Melbourne Vic Australia: The Institute of Materials Engineering Australasia, p. 171 - 176 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Microstructure Driven Modelling of Hot Extrusion

Sivaprasad, P., Davies, C. H. J., Venugopal, S. & Mannan, S. L., 2001, Engineering Materials 2001. Pereloma, E. V. & Krishnamurthy, R. (eds.). Melbourne Vic Australia: The Institute of Materials Engineering Australasia, p. i-32 - i-37 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

On Assessment of Interface Friction Factor Using the Contour of the bulge of Upset Specimens and the Finite Element Calibration Curves

Sivaprasad, P. & Davies, C. H. J., 2001, Engineering Materials 2001. Pereloma, E. V. & Krishnamurthy, R. (eds.). Melbourne Vic Australia: The Institute of Materials Engineering Australasia, p. ii/105 - ii/110 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2003

Anistropy of tensile properties of extruded magnesium alloy AZ31

Xiong, F. J. & Davies, C. H. J., 2003, Materials Science Forum. Chandra, T., Torralba, J. M. & Sakai, T. (eds.). Switzerland: Trans Tech Publications, Vol. 426-432. p. 3605 - 3610 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Extrusion limits for AZ alloys with Al contents

Barnett, M., Yao, J. Y. & Davies, C. H. J., 2003, Proc. First International Light Metals Technology Conference 2003. Dahle, A. (ed.). Brisbane Qld Australia: Cast Centre Pty.Ltd., p. 333 - 338 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

12 Citations (Scopus)

Microstructural evolution during the hot deformation of magnesium alloy AZ31

Grosvenor, A. R. & Davies, C. H. J., 2003, Materials Science Forum. Chandra, T., Torralba, J. M. & Sakai, T. (eds.). Switzerland: Trans Tech Publications, Vol. 426-432. p. 4567 - 4572 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Modelling flow stress and microstructure during hot deformation

Davies, C. H. J., 2003, Proc. International Conference on Thermomechanical Processing: Mechanics, Microstructure & Control. palmiere, E. J., Mahfouf, M. & Pinna, C. (eds.). Sheffield UK: Dept. of Engineering Materials, Sheffield University, p. 40 - 44 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2004
2 Citations (Scopus)

Microstructural development in interstitial free steel processed by equal channel angular extrusion

Gazder, A. A., Davies, C. H. J. & Pereloma, E. V., 15 Jul 2004, Ultrafine Grained Materials III. Zhu, Y. T., Langdon, T. G., Valiev, R. Z. & Lee Semiatin, S. (eds.). p. 321-326 6 p. (Ultrafine Grained Materials III).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

1 Citation (Scopus)

On the influence of the misorientation of grains, grain size and boundary volume on the strength and ductility of ultrafine grained Cu

Dalla Torre, F. H., Lapovok, R. Y., Thomson, P. F., Sandlin, J. D., Davies, C. H. J. & Pereloma, E. V., 2004, Nanoscale materials and modelling-relations among processing, microstructure and mechanical properties. Anderson, P. M., Foecke, T., Misra, A. & Rudd, R. E. (eds.). Warrendale PA USA: Materials Research Society, Vol. 821. p. p9.10.1 - p.9.10.6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2005

A Comparison of the Mechanical Properties of Equal Channel Angular Extruded Cu Measured by Tensile, Compression anmd Small Shear-Punch Tests

Dalla Torre, F. H., Davies, C. H. J., Sandlin, J. D., Lapovok, R. Y., Thomson, P. F. & Pereloma, E. V., 2005, Materials Forum: Advanced Materials Processing. Nie, J. F. & Barnett, M. (eds.). Melbourne Vic Australia: The Institute of Materials Engineering Australasia, Vol. 29. p. 60 - 65 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Effect of Strain Path on Texture Evolution in Interstitial Free Steel Subjected to Equal Channel Angular Extrusion

Gazder, A. A., Davies, C. H. J. & Pereloma, E. V., 2005, Materials Forum: Advanced Materials Processing. Nie, J. F. & Barnett, M. (eds.). Melbourne Vic Australia: The Institute of Materials Engineering Australasia, Vol. 29. p. 210 - 215 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

7 Citations (Scopus)

Strain Path and Temperature Effects on Texture and Microstructure Evolution of AZ31

Xiong, F. J. & Davies, C. H. J., 2005, Magnesium Technology 2005. Neelameggham, N. R., Kaplan, H. I. & Powell, B. R. (eds.). Warrendale PA USA: TMS, p. 217 - 222 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

25 Citations (Scopus)

Synchrotron Radiation Investigation of Twinning in Extruded Magnesium Alloy AZ31

Davies, C. H. J., Yi, S. M., Bohlen, J., Kainer, K. U. & Brokmeier, H-G., 2005, Materials Science Forum. Houtte, P. V. & Kestens, L. (eds.). Zurich Switzerland: Trans Tech Publications, Vol. 495-497. p. 1633 - 1638 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Texture Development in Interstitial Free (F) Steel Subjected to Two Cycles of Equal Channel Angular Extrusion

Pereloma, E. V., Gazder, A. A. & Davies, C. H. J., 2005, Materials Science Forum. Houtte, P. V. & Kestens, L. (eds.). Zurich Switzerland: Trans Tech Publications, Vol. 495-497. p. 809 - 814 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2 Citations (Scopus)

Texture development in interstitial free (IF) steel subjected to two cycles of equal channel angular extrusion

Pereloma, E. V., Gazder, A. A. & Davies, C. H. J., 1 Dec 2005, Textures of Materials, ICOTOM 14 - Proceedings of the 14th International Conference on Textures of Materials. PART 1 ed. p. 809-814 6 p. (Materials Science Forum; vol. 495-497, no. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Texture Evolution in Commercially Pure Titanium During Plane Strain Compression

Battaini, M. J., Pereloma, E. V. & Davies, C. H. J., 2005, Materials Forum: Advanced Materials Processing. Nie, J. F. & Barnett, M. R. (eds.). Melbourne Vic Australia: The Institute of Materials Engineering Australasia, Vol. 29. p. 515 - 520 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)

Thermal Stability of Copper Produced by Severe Plastic Deformation

Gu, C., Dalla Torre, F. H., Sandlin, J. D., Pereloma, E. V. & Davies, C. H. J., 2005, Materials Forum: Advanced Materials Processing. Nie, J. F. & Barnett, M. R. (eds.). Melbourne Vic Australia: The Institute of Materials Engineering Australasia, Vol. 29. p. 551 - 555 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2007

Effect of orientation and temperature on the mechanical properties of commercialy pure titantium

Battaini, M. J., Pereloma, E. & Davies, C. H. J., 2007, Thermec 06, Advanced Materials Research. Chandra, T., Tsuzaki, K., Militzer, M. & Ravindran, C. (eds.). Switzerland: Trans Tech Publications, Vol. 15-17. p. 941 - 946 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Effect of solidification grain refinement on the development of wrough Mg alloys

Easton, M. A., Davies, C. H. J., Barnett, M. & Pravdic, F., 2007, Materials Science Forum. Chandra, T., Tsuzaki, K., Militzer, M. & Ravindran, C. (eds.). Switzerland: Trans Tech Publications, Vol. 539-543. p. 1729 - 1732 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

5 Citations (Scopus)

Effect of solidification grain refinement on the development of wrought Mg alloys

Easton, M. A., Davies, C. H. J., Barnett, M. R. & Pravdic, F., 1 Dec 2007, Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 2 ed. p. 1729-1734 6 p. (Materials Science Forum; vol. 539-543, no. PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

4 Citations (Scopus)

Texture and Boundary Characteristics of Severely Deformed and Recrystallized Copper

Davies, C. H. J., Cao, W., Gu, C., Lapovok, R. Y. & Pereloma, E., 2007, Recrystallization and Grain Growth III, Materials Science Forum. Kang, S. J. L., Huh, M. Y., Hwang, N. M., Homma, H., Ushioda, K. & Ikuhara, Y. (eds.). Switzerland: Trans Tech Publications, Vol. 558-559. p. 177 - 182 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2 Citations (Scopus)

Texture evolution during annealing of warm rolled cr-containing low carbon steels

Pereloma, E., Gazder, A., Jonas, J. J. & Davies, C. H. J., 2007, Recrystallization and Grain Grow III, Materials Science Forum. Kang, S. J. L., Huh, M. Y., Hwang, N. M., Homma, H., Ushioda, K. & Ikuhara, Y. (eds.). Switzerland: Trans Tech Publications, Vol. 558-559. p. 295 - 300 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

11 Citations (Scopus)

The effect of twinning on strain rate sensitivity during the compression of extruded magnesium alloy AZ31

Davies, C. H. J., 2007, Thermec 06, Materials Science Forum. Chandra, T., Tsuzaki, K., Militzer, M. & Ravindran, C. (eds.). Switzerland: Trans Tech Publications, Vol. 539-543. p. 1723 - 1728 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2010
4 Citations (Scopus)

Exploiting low levels of rare earth addition in Mg extrusion alloys

Barnett, M. R., Beer, A., Atwell, D., Davies, C. H. J. & Abbott, T., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. p. 353-357 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2 Citations (Scopus)

Grain fragmentation in equal channel angular pressed copper

Gu, C., Toth, L. S., Beausir, B., Williams, T. & Davies, C., 2010, PRICM 7: Part 1. Nie, J-F. & Morton, A. (eds.). Pfaffikon Switzerland: Trans Tech Publications, p. 1570-1573 4 p. (Materials Science Forum; vol. 654-656).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

3 Citations (Scopus)

Mechanical, microstructure and texture properties of interstitial-free steel and copper subjected to equal channel angular extrusion and cold-rolling

Gazder, A., Hazra, S., Gu, C., Cao, W., Davies, C. & Pereloma, E., 2010, Journal of Physics: Conference Series [P]. Skrotzki, W., Oertel, C-G., Biermann, H. & Heilmaier, M. (eds.). United Kingdom: Institute of Physics Publishing (IOP Publishing), p. 1 - 4 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)

Modelling the high temperature deformation of Ti-6AI-4V

Zhong, J., Dargusch, M. & Davies, C., 2010, Materials Science Forum. Nie, J-F. & Morton, A. (eds.). Switzerland: Trans Tech Publications, Vol. 654-656. p. 879 - 882 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)

Twinning-induced negative strain rate sensitivity in wrought magnesium alloy AZ31

Chun, Y. & Davies, C., 2010, Materials Science Forum. Nie, J-F. & Morton, A. (eds.). Switzerland: Trans Tech Publications, Vol. 654-656. p. 707 - 710 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2012

Composite modelling of a two-phase titanium alloy

Zhong, J., Dargusch, M. S. & Davies, C., 2012, Proceedings of the 12th World Conference on Titanium (TI-2011): 19-24 June, 2011; Beijing China. Zhou, LI., Chang, H., Lu, Y. & Xu, D. (eds.). Beijing China: Science Press, Vol. 2. p. 867-869 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)

Composition effects on the corrosion of aluminium-free magnesium alloys

Xia, X., Birbilis, N., Davies, C. H. J. & Nie, J. F., 2012, Annual Conference of the Australasian Corrosion Association 2012: Melbourne, Victoria, Australia; 11-14 November 2012. Kerrimuir VIC Australia: Australasian Corrosion Association, p. 770-778 9 p. 142

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Microstructure and texture inhomogeneity in Ti-10V-2Fe-3Al

Zhao, J., Dargusch, M. & Davies, C. H. J., 2012, Proceedings of the 12th World Conference on Titanium (TI-2011): 19-24 June, 2011; Beijing China. Zhou, L., Chang, H., Lu, Y. & Xu, D. (eds.). Beijing China: Science Press, Vol. 1. p. 763-766 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

The application of magnesium alloys to the lightweighting of automotive structures

Easton, M. A., Gibson, M. A., Beer, A. G., Barnett, M. R., Davies, C. H. J., Durandet, Y., Blackett, S., Chen, X., Birbilis, N. & Abbott, T., 2012, Sustainable Automotive Technologies 2012 - Proceedings of the 4th International Conference. Subic, A., Wellnitz, J., Leary, M. & Koopmans, L. (eds.). Germany: Springer, p. 17 - 23 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Utilisation of atom probe data to model precipitation and strengthening in an Al-Mg-Si-Cu alloy during natural ageing and early-stage artificial ageing

Tomus, D., Rometsch, P., Cao, L., Couper, M. J. & Davies, C. H. J., 2012, ICAA13:13th International Conference on Aluminum Alloys. Weiland, H., Rollet, A. D. & Cassada, W. A. (eds.). Warrandale PA USA: The Minerals, Metals & Materials Society, p. 267 - 272 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2013

Effects of zinc and strontium on the corrosion of aluminium-free magnesium alloys

Xia, X., Birbilis, N., Davies, C. H. J. & Nie, J. F., 2013, Annual Conference of the Australasian Corrosion Association 2013: Corrosion and Prevention 2013: Brisbane, Australia; 10-13 November 2013. Kerrimuir VIC Australia: Australasian Corrosion Association (ACA), p. 697-705 9 p. 121

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Investigation of corrosion fatigue of Magnesium alloys for biodegradable implant applications

Jafari, S., Singh, R. R. K. & Davies, C. H. J., 2013, Corrosion & Prevention 2013. Carroll, F. (ed.). Australia: Australasian Corrosion Association, p. 497-502 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOtherpeer-review

2017

Development of 〈1010〉 Texture During Tensile Test at Room Temperature

Zeng, Z., Bian, M., Xu, S., Davies, C. H. J., Birbilis, N. & Nie, J. F., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer, p. 521-524 4 p. (Minerals, Metals and Materials Series; vol. Part F8).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Microstructure evolution and strengthening mechanisms of aluminium alloy A357 manufactured by Selective Laser Melting

Rao, H., Wu, X. & Davies, C. H. J., 2017, 17th Australian International Aerospace Congress : AIAC 2017: Melbourne, Australia, 26-28 February, 2017. Barton, ACT: Engineers Australia, p. 110-115 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearch

1 Citation (Scopus)

The effect of Cu-based core-sheath configurations on the processing of Nd-Fe-B-based permanent magnets via equal-channel angular pressing

Besley, L., Zhang, H., Molotnikov, A., Kishimoto, H., Kato, T. A., Davies, C. & Suzuki, K., 8 May 2017, IOP Conference Series: Materials Science and Engineering: 7th International Conference on Nanomaterials by Severe Plastic Deformation, 2–7 July 2017, Sydney, Australia. Estrin, Y. & Liao, X. (eds.). Vol. 194. 6 p. 012043. (IOP Conference Series: Materials Science and Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Open Access
File