If you made any changes in Pure these will be visible here soon.

Research Output 1990 2020

2015
11 Citations (Scopus)

Inorganic particle enhanced polymer hollow fiber membranes with high mechanical properties

Feng, Y., Shamsaei, E., Davies, C. H. J. & Wang, H., 2015, In : Materials Chemistry and Physics. 167, p. 209 - 218 10 p.

Research output: Contribution to journalArticleResearchpeer-review

3 Citations (Scopus)

Microstructural and magnetic properties of Nd-Fe-B alloys processed by equal-channel angular pressing

Onal, E., Lapovok, R., Kishimoto, H., Kato, A., Davies, C. H. J. & Suzuki, K., 2015, In : Journal of Applied Physics. 117, 17, p. 1 - 4 4 p.

Research output: Contribution to journalArticleResearchpeer-review

Microstructure and texture evolution in double-cone samples of Ti6Al4V alloy with colony preform microstructure

Yang, K. V., Lim, C. V. S., Zhang, K., Sun, J., Yang, X., Huang, A., Wu, X. & Davies, C. H., Dec 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 46A, 12, p. 5989-6002 14 p.

Research output: Contribution to journalArticleResearchpeer-review

40 Citations (Scopus)

Texture evolution during cold rolling of dilute Mg alloys

Zeng, Z. R., Bian, M. Z., Xu, S. W., Davies, C. H. J., Birbilis, N. & Nie, J. F., 2015, In : Scripta Materialia. 108, p. 6 - 10 5 p.

Research output: Contribution to journalArticleResearchpeer-review

24 Citations (Scopus)

The effect of simulated thermomechanical processing on the transformation behavior and microstructure of a low-carbon Mo-Nb linepipe steel

Cizek, P., Wynne, B. P., Davies, C. H. J. & Hodgson, P. D., Jan 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 46A, 1, p. 407-425 19 p.

Research output: Contribution to journalArticleResearchpeer-review

6 Citations (Scopus)

The influence of copper additions and aging on the microstructure and metastable pitting of Al-Mg-Si alloys

Kairy, S. K., Rometsch, P. A., Davies, C. H. J. & Birbilis, N., 2015, In : Corrosion. 71, 11, p. 1304 - 1307 4 p.

Research output: Contribution to journalArticleResearchpeer-review

5 Citations (Scopus)

The influence of low levels of zinc, calcium, gadolinium, strontium, and zirconium on the corrosion of magnesium for wrought applications

Xia, X., Nie, J. F., Davies, C. H. J., Tang, W. N., Xu, S. W. & Birbilis, N., 2015, In : Corrosion. 71, 11, p. 1370 - 1386 17 p.

Research output: Contribution to journalArticleResearchpeer-review

2014
16 Citations (Scopus)

Recrystallisation in a cold drawn low cost beta titanium alloy during rapid resistance heating

Gazder, A. A., Vu, V. Q., Saleh, A. A., Markovsky, P. E., Ivasishin, O., Davies, C. H. J. & Pereloma, E. V., 2014, In : Journal of Alloys and Compounds. 585, p. 245 - 259 15 p.

Research output: Contribution to journalArticleResearchpeer-review

1 Citation (Scopus)

The evolution of in-grain misorientation axes (IGMA) during deformation of wrought magnesium alloy AZ31

Chun, Y. B. & Davies, C. H. J., 3 Mar 2014, Essential Readings in Magnesium Technology. Mathaudhu, S. N., Luo, A. A., Neelameggham, N. R., Nyberg, E. A. & Sillekens, W. H. (eds.). Hoboken NJ USA: John Wiley & Sons, p. 345-349 5 p.

Research output: Chapter in Book/Report/Conference proceedingChapter (Book)Otherpeer-review

24 Citations (Scopus)

Theoretical study of the influence of microalloying on sensitization of AA5083 and moderation of sensitization of a model Al-Mg-Mn alloy via Sr additions

Gupta, R. K., Zhang, R., Davies, C. H. J. & Birbilis, N., 2014, In : Corrosion. 70, 4, p. 402 - 413 12 p.

Research output: Contribution to journalArticleResearchpeer-review

2013

Effects of zinc and strontium on the corrosion of aluminium-free magnesium alloys

Xia, X., Birbilis, N., Davies, C. H. J. & Nie, J. F., 2013, Annual Conference of the Australasian Corrosion Association 2013: Corrosion and Prevention 2013: Brisbane, Australia; 10-13 November 2013. Kerrimuir VIC Australia: Australasian Corrosion Association (ACA), p. 697-705 9 p. 121

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

20 Citations (Scopus)

Imparting sensitization resistance to an Al-5Mg alloy via neodymium additions

Gupta, R. K., Wang, Y., Zhang, R., Sukiman, N., Davies, C. H. J. & Birbilis, N., 2013, In : Corrosion. 69, 1, p. 4 - 8 5 p.

Research output: Contribution to journalArticleResearchpeer-review

30 Citations (Scopus)

Influence of alloyed Nd content on the corrosion of an Al-5Mg alloy

Wang, Y., Gupta, R. K., Sukiman, N., Zhang, R., Davies, C. H. J. & Birbilis, N., 2013, In : Corrosion Science. 73, p. 181 - 187 7 p.

Research output: Contribution to journalArticleResearchpeer-review

31 Citations (Scopus)

Influence of Mg content on the sensitization and corrosion of Al-xMg(-Mn) alloys

Gupta, R. K., Zhang, R., Davies, C. H. J. & Birbilis, N., 2013, In : Corrosion. 69, 11, p. 1081 - 1087 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Investigation of corrosion fatigue of Magnesium alloys for biodegradable implant applications

Jafari, S., Singh, R. R. K. & Davies, C. H. J., 2013, Corrosion & Prevention 2013. Carroll, F. (ed.). Australia: Australasian Corrosion Association, p. 497-502 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOtherpeer-review

40 Citations (Scopus)

Quantification of sensitization in AA5083-H131 via imaging ga-embrittled fracture surfaces

Birbilis, N., Zhang, R., Lim, M. L. C., Gupta, R. K., Davies, C. H. J., Lynch, S. P., Kelly, R. G. & Scully, J. R., 2013, In : Corrosion. 69, 4, p. 396 - 402 7 p.

Research output: Contribution to journalArticleResearchpeer-review

2012

Composite modelling of a two-phase titanium alloy

Zhong, J., Dargusch, M. S. & Davies, C., 2012, Proceedings of the 12th World Conference on Titanium (TI-2011): 19-24 June, 2011; Beijing China. Zhou, LI., Chang, H., Lu, Y. & Xu, D. (eds.). Beijing China: Science Press, Vol. 2. p. 867-869 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)

Composition effects on the corrosion of aluminium-free magnesium alloys

Xia, X., Birbilis, N., Davies, C. H. J. & Nie, J. F., 2012, Annual Conference of the Australasian Corrosion Association 2012: Melbourne, Victoria, Australia; 11-14 November 2012. Kerrimuir VIC Australia: Australasian Corrosion Association, p. 770-778 9 p. 142

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

111 Citations (Scopus)

Effect of plate-shaped particle distributions on the deformation behaviour of magnesium alloy AZ91 in tension and compression

Stanford, N., Geng, J., Chun, Y. B., Davies, C. H. J., Nie, J. F. & Barnett, M. R., 2012, In : Acta Materialia. 60, 1, p. 218 - 228 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Microstructure and texture inhomogeneity in Ti-10V-2Fe-3Al

Zhao, J., Dargusch, M. & Davies, C. H. J., 2012, Proceedings of the 12th World Conference on Titanium (TI-2011): 19-24 June, 2011; Beijing China. Zhou, L., Chang, H., Lu, Y. & Xu, D. (eds.). Beijing China: Science Press, Vol. 1. p. 763-766 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

39 Citations (Scopus)

Size effects in micro cup drawing

Molotnikov, A., Lapovok, R. Y., Gu, C., Davies, C. H. J. & Estrin, Y., 2012, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 550, p. 312 - 319 8 p.

Research output: Contribution to journalArticleResearchpeer-review

31 Citations (Scopus)

Texture effects on development of shear bands in rolled AZ31 alloy

Chun, Y. B. & Davies, C. H. J., 2012, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 556, p. 253 - 259 7 p.

Research output: Contribution to journalArticleResearchpeer-review

The application of magnesium alloys to the lightweighting of automotive structures

Easton, M. A., Gibson, M. A., Beer, A. G., Barnett, M. R., Davies, C. H. J., Durandet, Y., Blackett, S., Chen, X., Birbilis, N. & Abbott, T., 2012, Sustainable Automotive Technologies 2012 - Proceedings of the 4th International Conference. Subic, A., Wellnitz, J., Leary, M. & Koopmans, L. (eds.). Germany: Springer, p. 17 - 23 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Utilisation of atom probe data to model precipitation and strengthening in an Al-Mg-Si-Cu alloy during natural ageing and early-stage artificial ageing

Tomus, D., Rometsch, P., Cao, L., Couper, M. J. & Davies, C. H. J., 2012, ICAA13:13th International Conference on Aluminum Alloys. Weiland, H., Rollet, A. D. & Cassada, W. A. (eds.). Warrandale PA USA: The Minerals, Metals & Materials Society, p. 267 - 272 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2011
23 Citations (Scopus)

Effect of strain path on grain refinement in severely plastically deformed copper

Gu, C., Toth, L., Arzaghi, M. & Davies, C., 2011, In : Scripta Materialia. 64, 3, p. 284 - 287 4 p.

Research output: Contribution to journalArticleResearchpeer-review

15 Citations (Scopus)

Effect of strain reversal on texture and grain refinement in route C equal channel angular pressed copper

Gu, C., Toth, L. & Davies, C., 2011, In : Scripta Materialia. 65, 2, p. 167 - 170 4 p.

Research output: Contribution to journalArticleResearchpeer-review

44 Citations (Scopus)

Investigation of prism 〈a〉 slip in warm-rolled AZ31 alloy

Chun, Y. B. & Davies, C. H. J., Dec 2011, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 42, 13, p. 4113-4125 13 p.

Research output: Contribution to journalArticleResearchpeer-review

21 Citations (Scopus)

Negative lateral strain ratio induced by deformation twinning in magnesium alloy AZ31

Davies, C. & Chun, Y., 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 528, 15, p. 4941 - 4946 6 p.

Research output: Contribution to journalArticleResearchpeer-review

59 Citations (Scopus)

Performance-driven design of biocompatible Mg alloys

Kirkland, N. T., Staiger, M. P., Nisbet, D., Davies, C. H. J. & Birbilis, N., Jun 2011, In : JOM. 63, 6, p. 28-34 7 p.

Research output: Contribution to journalReview ArticleResearchpeer-review

25 Citations (Scopus)

Processing and properties of Mg-6Gd-1Zn-0.6Zr: Part 1 - recrystallisation and texture development

Chun, Y., Geng, J., Stanford, N., Davies, C., Nie, J. & Barnett, M., 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 528, 10-11, p. 3653 - 3658 6 p.

Research output: Contribution to journalArticleResearchpeer-review

34 Citations (Scopus)

Processing and properties of Mg-6Gd-1Zn-0.6Zr Part 2. Mechanical properties and particle twin interactions

Geng, J., Chun, Y., Stanford, N., Davies, C., Nie, J. & Barnett, M., 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 528, 10-11, p. 3659 - 3665 7 p.

Research output: Contribution to journalArticleResearchpeer-review

31 Citations (Scopus)

Texture effect on microyielding of wrought magnesium alloy AZ31

Chun, Y. & Davies, C., 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 528, 9, p. 3489 - 3495 7 p.

Research output: Contribution to journalArticleResearchpeer-review

8 Citations (Scopus)

Texture evolution and grain refinement of ultrafine-grained copper during micro-extrusion

Gu, C., Toth, L., Lapovok, R. & Davies, C., 2011, In : Philosophical Magazine. 91, 2, p. 273 - 290 18 p.

Research output: Contribution to journalArticleResearchpeer-review

11 Citations (Scopus)

Twinning-induced anomaly in the yield surface of highly textured Mg-3A1-1Zn plate

Chun, Y. & Davies, C., 2011, In : Scripta Materialia. 64, 10, p. 958 - 961 4 p.

Research output: Contribution to journalArticleResearchpeer-review

51 Citations (Scopus)

Twinning-induced negative strain rate sensitivity in wrought Mg alloy AZ31

Chun, Y. B. & Davies, C. H. J., 15 Jul 2011, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 528, 18, p. 5713-5722 10 p.

Research output: Contribution to journalArticleResearchpeer-review

2010
67 Citations (Scopus)
53 Citations (Scopus)

Effect of grain refinement by severe plastic deformation on the next-neighbor misorientation distribution

Toth, L., Beausir, B., Gu, C., Estrin, Y., Scheerbaum, N. & Davies, C., 2010, In : Acta Materialia. 58, 20, p. 6706 - 6716 11 p.

Research output: Contribution to journalArticleResearchpeer-review

4 Citations (Scopus)

Exploiting low levels of rare earth addition in Mg extrusion alloys

Barnett, M. R., Beer, A., Atwell, D., Davies, C. H. J. & Abbott, T., 2010, Magnesium Technology 2010 - Held During TMS 2010 Annual Meeting and Exhibition. p. 353-357 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

105 Citations (Scopus)

Grain character influences on corrosion of ECAPed pure magnesium

Birbilis, N., Ralston, K., Virtanen, S., Fraser, H. & Davies, C., 2010, In : Corrosion Engineering Science and Technology. 45, 3, p. 224 - 230 7 p.

Research output: Contribution to journalArticleResearchpeer-review

2 Citations (Scopus)

Grain fragmentation in equal channel angular pressed copper

Gu, C., Toth, L. S., Beausir, B., Williams, T. & Davies, C., 2010, PRICM 7: Part 1. Nie, J-F. & Morton, A. (eds.). Pfaffikon Switzerland: Trans Tech Publications, p. 1570-1573 4 p. (Materials Science Forum; vol. 654-656).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

3 Citations (Scopus)

Mechanical, microstructure and texture properties of interstitial-free steel and copper subjected to equal channel angular extrusion and cold-rolling

Gazder, A., Hazra, S., Gu, C., Cao, W., Davies, C. & Pereloma, E., 2010, Journal of Physics: Conference Series [P]. Skrotzki, W., Oertel, C-G., Biermann, H. & Heilmaier, M. (eds.). United Kingdom: IOP Publishing, p. 1 - 4 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)

Modelling the high temperature deformation of Ti-6AI-4V

Zhong, J., Dargusch, M. & Davies, C., 2010, Materials Science Forum. Nie, J-F. & Morton, A. (eds.). Switzerland: Trans Tech Publications, Vol. 654-656. p. 879 - 882 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

302 Citations (Scopus)

Revealing the relationship between grain size and corrosion rate of metals

Ralston, K., Birbilis, N. & Davies, C., 2010, In : Scripta Materialia. 63, 12, p. 1201 - 1204 4 p.

Research output: Contribution to journalArticleResearchpeer-review

6 Citations (Scopus)

Texture evolution during micro-drawing of ultrafine grained copper

Toth, L., Lapovok, R., Molotnikov, A., Gu, C., Fundenberger, J. J. & Davies, C., 2010, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 527, 18-19, p. 4633 - 4640 8 p.

Research output: Contribution to journalArticleResearchpeer-review

The evolution of in-grain misorientation axes (IGMA) during deformation of wrought magnesium alloy AZ31

Chun, Y., Agnew, S. R. (ed.), Davies, C., Neelameggham, N. R. (ed.), Nyberg, E. A. (ed.) & Sillekens, W. H. (ed.), 2010, p. 433 - 437. 5 p.

Research output: Contribution to conferenceOtherOther

13 Citations (Scopus)

Thermal stability of ultrafine-grained copper during high speed micro-extrusion

Gu, C. & Davies, C. H. J., 2010, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 527, 7-8, p. 1791 - 1799 9 p.

Research output: Contribution to journalArticleResearchpeer-review

1 Citation (Scopus)

Twinning-induced negative strain rate sensitivity in wrought magnesium alloy AZ31

Chun, Y. & Davies, C., 2010, Materials Science Forum. Nie, J-F. & Morton, A. (eds.). Switzerland: Trans Tech Publications, Vol. 654-656. p. 707 - 710 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2009

Cellular automaton models of recrystallization

Davies, C. H. J., 2009, ASM Handbook, volume 22A: Fundamentals of modeling for metals processing. Furrer, D. U. & Semiatin, S. L. (eds.). USA: ASM International, p. 260 - 266 7 p.

Research output: Chapter in Book/Report/Conference proceedingChapter (Book)Researchpeer-review

32 Citations (Scopus)

Deep drawing behaviour of ultrafine grained copper: Modelling and experiment

Ma, X., Lapovok, R. Y., Gu, C., Molotnikov, A., Estrin, Y., Pereloma, E., Davies, C. H. J. & Hodgson, P. D., 2009, In : Journal of Materials Science. 44, 14, p. 3807 - 3812 6 p.

Research output: Contribution to journalArticleResearchpeer-review

4 Citations (Scopus)

Microstructure evolution modeling during and after deformation in 304 austenitic stainless steel through cellular automaton approach

Yazdipour, N., Hodgson, P. D. & Davies, C. H. J., 2009, In : International Journal for Multiscale Computational Engineering. 7, 5, p. 381 - 393 13 p.

Research output: Contribution to journalArticleResearchpeer-review