If you made any changes in Pure these will be visible here soon.

Research Output 1990 2020

Article
17 Citations (Scopus)

Achieving exceptionally high strength in Mg–3Al–1Zn-0.3Mn extrusions via suppressing intergranular deformation

Zeng, Z. R., Zhu, Y. M., Liu, R. L., Xu, S. W., Davies, C. H. J., Nie, J. F. & Birbilis, N., 1 Nov 2018, In : Acta Materialia. 160, p. 97-108 12 p.

Research output: Contribution to journalArticleResearchpeer-review

A comparison of the mechanical properties of equal channel angular extruded cu measured by tensile, compression and small shear-punch tests

Dalla Torre, F., Davies, C. H. J., Sandlin, J., Lapovok, R., Thomson, P. F. & Pereloma, E. V., 5 Sep 2005, In : Materials Forum. 29, p. 60-64 5 p.

Research output: Contribution to journalArticleResearchpeer-review

4 Citations (Scopus)

A digital image correlation study of a NiTi alloy subjected to monotonic uniaxial and cyclic loading-unloading in tension

Bian, X., Saleh, A. A., Pereloma, E. V., Davies, C. H. J. & Gazder, A. A., 30 May 2018, In : Materials Science and Engineering A. 726, p. 102-112 11 p.

Research output: Contribution to journalArticleResearchpeer-review

17 Citations (Scopus)

Ageing kinetics of a silicon carbide reinforced AlZnMgCu alloy

Davies, C. H. J., Raghunathan, N. & Sheppard, T., 1 Jan 1994, In : Acta Metallurgica Et Materialia. 42, 1, p. 309-318 10 p.

Research output: Contribution to journalArticleResearchpeer-review

60 Citations (Scopus)

A Mechanical Approach to Quantify Dynamic Recrystallization in Polycrystalline Metals

Zahiri, S. H., Davies, C. H. J. & Hodgson, P., 2005, In : Scripta Materialia. 52, 4, p. 299 - 304 6 p.

Research output: Contribution to journalArticleResearchpeer-review

80 Citations (Scopus)

An Analytical Constitutive Law for Twinning Dominated Flow in Magnesium

Barnett, M. R., Davies, C. H. J. & Ma, X., 2005, In : Scripta Materialia. 52, 7, p. 627 - 632 6 p.

Research output: Contribution to journalArticleResearchpeer-review

19 Citations (Scopus)

An artificial neural network for predicting corrosion rate and hardness of magnesium alloys

Xia, X., Nie, J. F., Davies, C. H. J., Tang, W. N., Xu, S. W. & Birbilis, N., 15 Jan 2016, In : Materials & Design. 90, p. 1034-1043 10 p.

Research output: Contribution to journalArticleResearchpeer-review

9 Citations (Scopus)

An Assessment of the Interface Friction Factor using the Geometry of Upset Specimens

Sivaprasad, P. & Davies, C. H. J., 2005, In : Modelling and Simulation in Materials Science and Engineering. 13, 3, p. 355 - 360 6 p.

Research output: Contribution to journalArticleResearchpeer-review

69 Citations (Scopus)

An EBSD investigation of interstitial-free steel subjected to equal channel angular extrusion

Gazder, A., Cao, W., Davies, C. H. J. & Pereloma, E., 2008, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 497, p. 341 - 352 12 p.

Research output: Contribution to journalArticleResearchpeer-review

9 Citations (Scopus)

An in-situ neutron diffraction study of a multi-phase transformation and twinning-induced plasticity steel during cyclic loading

Saleh, A. A., Brown, D. W., Pereloma, E. V., Clausen, B., Davies, C. H. J., Tome, C. N. & Gazder, A. A., 2015, In : Applied Physics Letters. 106, 17, p. 1 - 5 5 p.

Research output: Contribution to journalArticleResearchpeer-review

An in-situ synchrotron study of the B2→B19′ phase transformation in a Ni-Ti alloy subjected to uniaxial monotonic tension

Bian, X., Saleh, A. A., Lynch, P. A., Davies, C. H. J., Pereloma, E. V. & Gazder, A. A., 16 Jan 2019, In : Materials Science and Engineering A. 743, p. 327-338 12 p.

Research output: Contribution to journalArticleResearchpeer-review

25 Citations (Scopus)

Annealing strengthening in a dilute Mg-Zn-Ca sheet alloy

Zeng, Z. R., Zhu, Y. M., Bian, M. Z., Xu, S. W., Davies, C. H. J., Birbilis, N. & Nie, J. F., 2015, In : Scripta Materialia. 107, p. 127 - 130 4 p.

Research output: Contribution to journalArticleResearchpeer-review

8 Citations (Scopus)

Application of Bainite Transformation Model to Estimation of Processing Window Boundaries for Mn-Mo-Cu Austempered Ductile Iron

Zahiri, S. H., Pereloma, E. V. & Davies, C. H. J., 2001, In : Materials Science and Technology. 17, p. 1563 - 1568 6 p.

Research output: Contribution to journalArticleResearchpeer-review

1 Citation (Scopus)

Application of the renormalization group method to the failure of fibre bundles

Davies, C. H. J., 1 Jan 1995, In : Journal of Materials Science Letters. 14, 24, p. 1813-1814 2 p.

Research output: Contribution to journalArticleResearchpeer-review

37 Citations (Scopus)

A survey of sensitization in 5xxx series aluminum alloys

Zhang, R., Knight, S. P., Holtz, R. L., Goswami, R., Davies, C. H. J. & Birbilis, N., Feb 2016, In : Corrosion. 72, 2, p. 144 - 159 16 p.

Research output: Contribution to journalArticleResearchpeer-review

18 Citations (Scopus)

Carbon nanotube/alumina/polyethersulfone hybrid hollow fiber membranes with enhanced mechanical and anti-fouling properties

Feng, Y., Wang, K., Davies, C. H. J. & Wang, H., 2015, In : Nanomaterials. 5, 3, p. 1366 - 1378 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
41 Citations (Scopus)

Cellular automation simulation of static recrystallization in cold-rolled AA1050

Davies, C. H. J. & Hong, L., 23 Apr 1999, In : Scripta Materialia. 40, 10, p. 1145-1150 6 p.

Research output: Contribution to journalArticleResearchpeer-review

6 Citations (Scopus)

Cellular automaton modelling of precipitate coarsening

Young, M. & Davies, C. H. J., 1999, In : Scripta Materialia. p. 697 - 701 5 p.

Research output: Contribution to journalArticleResearchpeer-review

8 Citations (Scopus)

Constitutive Behaviour of Composites of AA6061 and Alumina

Davies, C. H., Hawbolt, E. B., Samarasekera, I. V. & Brimacombe, J. K., 1997, In : Journal of Materials Processing Technology. p. 244 - 251 8 p.

Research output: Contribution to journalArticleResearchpeer-review

90 Citations (Scopus)

Construction of extrusion limit diagram for AZ31 magnesium alloy by FE simulation

Lapovok, R. Y., Barnett, M. & Davies, C. H. J., 2004, In : Journal of Materials Processing Technology. 146, 3, p. 408 - 414 7 p.

Research output: Contribution to journalArticleResearchpeer-review

41 Citations (Scopus)

Corrosion fatigue of a magnesium alloy in modified simulated body fluid

Jafari, S., Singh Raman, R. K. & Davies, C. H. J., 2015, In : Engineering Fracture Mechanics. 137, p. 2 - 11 10 p.

Research output: Contribution to journalArticleResearchpeer-review

146 Citations (Scopus)

Corrosion of magnesium alloys: the role of alloying

Gusieva, K., Davies, C. H. J., Scully, J. R. & Birbilis, N., 2015, In : International Materials Reviews. 60, 3, p. 169 - 194 26 p.

Research output: Contribution to journalArticleResearchpeer-review

27 Citations (Scopus)

Critical issues in the extrusion of particle reinforced metal matrix composites

Davies, C. H. J., 1 Jan 1995, In : Key Engineering Materials. 104-107, Pt 1, p. 447-458 12 p.

Research output: Contribution to journalArticleResearchpeer-review

32 Citations (Scopus)

Deep drawing behaviour of ultrafine grained copper: Modelling and experiment

Ma, X., Lapovok, R. Y., Gu, C., Molotnikov, A., Estrin, Y., Pereloma, E., Davies, C. H. J. & Hodgson, P. D., 2009, In : Journal of Materials Science. 44, 14, p. 3807 - 3812 6 p.

Research output: Contribution to journalArticleResearchpeer-review

255 Citations (Scopus)

Deformation and texture evolution in AZ31 magnesium alloy during uniaxial loading

Yi, S. M., Davies, C. H. J., Brokmeier, H-G., Bolmaro, R., Kainer, K. U. & Homeyer, J., 2006, In : Acta Materialia. 54, p. 549 - 562 14 p.

Research output: Contribution to journalArticleResearchpeer-review

67 Citations (Scopus)
9 Citations (Scopus)

Dynamics of the evolution of dislocation populations

Davies, C. H. J., 1 Feb 1994, In : Scripta Metallurgica et Materiala. 30, 3, p. 349-353 5 p.

Research output: Contribution to journalArticleResearchpeer-review

110 Citations (Scopus)
53 Citations (Scopus)

Effect of grain refinement by severe plastic deformation on the next-neighbor misorientation distribution

Toth, L., Beausir, B., Gu, C., Estrin, Y., Scheerbaum, N. & Davies, C., 2010, In : Acta Materialia. 58, 20, p. 6706 - 6716 11 p.

Research output: Contribution to journalArticleResearchpeer-review

21 Citations (Scopus)

Effect of heat treatment on the microstructure and anisotropy in mechanical properties of A357 alloy produced by selective laser melting

Yang, K. V., Rometsch, P., Davies, C. H. J., Huang, A. & Wu, X., 15 Sep 2018, In : Materials and Design. 154, p. 275-290 16 p.

Research output: Contribution to journalArticleResearchpeer-review

240 Citations (Scopus)

Effect of microalloying with rare-earth elements on the texture of extruded magnesium-based alloys

Stanford, N., Atwell, D., Beer, A., Davies, C. H. J. & Barnett, M., 2008, In : Scripta Materialia. 59, 7, p. 772 - 775 4 p.

Research output: Contribution to journalArticleResearchpeer-review

8 Citations (Scopus)

Effect of microtexture on short crack propagation in two-phase titanium alloys

Zhang, K., Wu, X. & Davies, C. H. J., 1 Nov 2017, In : International Journal of Fatigue. 104, p. 206-220 15 p.

Research output: Contribution to journalArticleResearchpeer-review

12 Citations (Scopus)

Effect of nitrogen on formation of martensite-austenite constituent in low carbon steels

Staiger, M., Jessop, B., Hodgson, P. D., Brownrigg, A. & Davies, C. H. J., 1999, In : ISIJ International. p. 183 - 190 8 p.

Research output: Contribution to journalArticleResearchpeer-review

111 Citations (Scopus)

Effect of plate-shaped particle distributions on the deformation behaviour of magnesium alloy AZ91 in tension and compression

Stanford, N., Geng, J., Chun, Y. B., Davies, C. H. J., Nie, J. F. & Barnett, M. R., 2012, In : Acta Materialia. 60, 1, p. 218 - 228 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Effect of processing parameters on the magnetic properties and macrotexture of a Nd13.5Fe73.8Co6.7B5.6Ga0.4 alloy processed by equal channel angular pressing with back pressure

Onal, E., Lapovok, R., Kishimoto, H., Kato, A., Davies, C. H. J. & Suzuki, K., 1 Jul 2016, In : IEEE Transactions on Magnetics. 52, 7, 4 p., 2101004.

Research output: Contribution to journalArticleOtherpeer-review

82 Citations (Scopus)

Effect of processing route on microstructure and texture development in equal channel angular extrusion of interstitial-free steel

Li, S., Gazder, A., Beyerlein, I., Pereloma, E. & Davies, C. H. J., 2006, In : Acta Materialia. 54, 4, p. 1087 - 1100 14 p.

Research output: Contribution to journalArticleResearchpeer-review

4 Citations (Scopus)

Effect of processing schedule on the microstructure and texture of 0.78 wt% Cr extra-low-carbon steel

Pereloma, E., Gazder, A., Jonas, J. J., Miller, M. K. & Davies, C. H. J., 2008, In : ISIJ International. 48, 10, p. 1443 - 1450 8 p.

Research output: Contribution to journalArticleResearchpeer-review

23 Citations (Scopus)

Effect of strain path on grain refinement in severely plastically deformed copper

Gu, C., Toth, L., Arzaghi, M. & Davies, C., 2011, In : Scripta Materialia. 64, 3, p. 284 - 287 4 p.

Research output: Contribution to journalArticleResearchpeer-review

15 Citations (Scopus)

Effect of strain reversal on texture and grain refinement in route C equal channel angular pressed copper

Gu, C., Toth, L. & Davies, C., 2011, In : Scripta Materialia. 65, 2, p. 167 - 170 4 p.

Research output: Contribution to journalArticleResearchpeer-review

8 Citations (Scopus)

Effect of the presence of macrozones on short crack propagation in forged two-phase titanium alloys

Zhang, K., Yang, K. V., Lim, S., Wu, X. & Davies, C. H. J., 1 Nov 2017, In : International Journal of Fatigue. 104, p. 1-11 11 p.

Research output: Contribution to journalArticleResearchpeer-review

1 Citation (Scopus)

Effects of calcium on strength and microstructural evolution of extruded alloys based on Mg-3Al-1Zn-0.3Mn

Zeng, Z. R., Zhu, Y. M., Nie, J. F., Xu, S. W., Davies, C. H. J. & Birbilis, N., Sep 2019, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50A, 9, p. 4344–4363 20 p.

Research output: Contribution to journalArticleResearchpeer-review

26 Citations (Scopus)

Effects of dilute additions of Zn and Ca on ductility of magnesium alloy sheet

Zeng, Z. R., Bian, M. Z., Xu, S. W., Davies, C. H. J., Birbilis, N. & Nie, J. F., 30 Sep 2016, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 674, p. 459-471 13 p.

Research output: Contribution to journalArticleResearchpeer-review

2 Citations (Scopus)

Enhanced Tensile Properties of Mg Sheets by a Unique Thermomechanical Processing Method

Bian, M., Zeng, Z., Xu, S., Tang, W., Davies, C. H. J., Birbilis, N. & Nie, J., 1 Dec 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47A, 12, p. 5709-5713 5 p.

Research output: Contribution to journalArticleResearchpeer-review

Evolution of anelastic behaviour and twinning in cyclic loading of extruded magnesium alloy ZM21

Fallahi, H., Tabarroki, M. & Davies, C., 7 Jan 2020, In : Materials Science and Engineering A. 770, 11 p., 138520.

Research output: Contribution to journalArticleResearchpeer-review

45 Citations (Scopus)

Evolution of microstructure, mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy prepared by direct laser fabrication

Wang, R., Zhang, K., Davies, C. & Wu, X., 15 Feb 2017, In : Journal of Alloys and Compounds. 694, p. 971-981 11 p.

Research output: Contribution to journalArticleResearchpeer-review

43 Citations (Scopus)

Expanding the extrusion limits of wrought magnesium alloys

Davies, C. H. J. & Barnett, M., 2004, In : JOM. 56, 5, p. 22 - 24 3 p.

Research output: Contribution to journalArticleResearchpeer-review

12 Citations (Scopus)

Experiment-based modelling of grain boundary β-phase (Mg2Al3) evolution during sensitisation of aluminium alloy AA5083

Zhang, R., Steiner, M. A., Agnew, S. R., Kairy, S. K., Davies, C. H. J. & Birbilis, N., 2017, In : Scientific Reports. 7, 1, 14 p., 2961.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
31 Citations (Scopus)

Exploring the electrochemistry of 6xxx series aluminium alloys as a function of Si to Mg ratio, Cu content, ageing conditions and microstructure

Kairy, S. K., Rometsch, P. A., Diao, K., Nie, J. F., Davies, C. H. J. & Birbilis, N., 1 Feb 2016, In : Electrochimica Acta. 190, p. 92-103 12 p.

Research output: Contribution to journalArticleResearchpeer-review

4 Citations (Scopus)

Fabrication and properties of rapidly solidified powder-based high-temperature application light-alloy composites

Raghunathan, N., Mcshane, H. B., Davies, C. & Sheppard, T., 1 Nov 1990, In : Journal of Materials Science. 25, 11, p. 4906-4913 8 p.

Research output: Contribution to journalArticleResearchpeer-review

20 Citations (Scopus)

Fatigue crack initiation in as forged Ti-6Al-4V bars with macrozones present

Zhang, K., Yang, K., Huang, A., Wu, X. & Davies, C. H. J., 2015, In : International Journal of Fatigue. 80, p. 288 - 297 10 p.

Research output: Contribution to journalArticleResearchpeer-review