If you made any changes in Pure these will be visible here soon.

Research Output 1990 2020

17 Citations (Scopus)

Achieving exceptionally high strength in Mg–3Al–1Zn-0.3Mn extrusions via suppressing intergranular deformation

Zeng, Z. R., Zhu, Y. M., Liu, R. L., Xu, S. W., Davies, C. H. J., Nie, J. F. & Birbilis, N., 1 Nov 2018, In : Acta Materialia. 160, p. 97-108 12 p.

Research output: Contribution to journalArticleResearchpeer-review

A comparison of the mechanical properties of equal channel angular extruded cu measured by tensile, compression and small shear-punch tests

Dalla Torre, F., Davies, C. H. J., Sandlin, J., Lapovok, R., Thomson, P. F. & Pereloma, E. V., 5 Sep 2005, In : Materials Forum. 29, p. 60-64 5 p.

Research output: Contribution to journalArticleResearchpeer-review

A Comparison of the Mechanical Properties of Equal Channel Angular Extruded Cu Measured by Tensile, Compression anmd Small Shear-Punch Tests

Dalla Torre, F. H., Davies, C. H. J., Sandlin, J. D., Lapovok, R. Y., Thomson, P. F. & Pereloma, E. V., 2005, Materials Forum: Advanced Materials Processing. Nie, J. F. & Barnett, M. (eds.). Melbourne Vic Australia: The Institute of Materials Engineering Australasia, Vol. 29. p. 60 - 65 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

4 Citations (Scopus)

A digital image correlation study of a NiTi alloy subjected to monotonic uniaxial and cyclic loading-unloading in tension

Bian, X., Saleh, A. A., Pereloma, E. V., Davies, C. H. J. & Gazder, A. A., 30 May 2018, In : Materials Science and Engineering A. 726, p. 102-112 11 p.

Research output: Contribution to journalArticleResearchpeer-review

A flexible learning studio for materials science and engineering education

Davies, C. H. J., Finlayson, T. R. & Hines, P. J., 2001, Journal of Materials Education. Baglin, J. E. (ed.). University of North Texas USA: Materials Research Council, Vol. 23. p. 41 - 50 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

17 Citations (Scopus)

Ageing kinetics of a silicon carbide reinforced AlZnMgCu alloy

Davies, C. H. J., Raghunathan, N. & Sheppard, T., 1 Jan 1994, In : Acta Metallurgica Et Materialia. 42, 1, p. 309-318 10 p.

Research output: Contribution to journalArticleResearchpeer-review

60 Citations (Scopus)

A Mechanical Approach to Quantify Dynamic Recrystallization in Polycrystalline Metals

Zahiri, S. H., Davies, C. H. J. & Hodgson, P., 2005, In : Scripta Materialia. 52, 4, p. 299 - 304 6 p.

Research output: Contribution to journalArticleResearchpeer-review

80 Citations (Scopus)

An Analytical Constitutive Law for Twinning Dominated Flow in Magnesium

Barnett, M. R., Davies, C. H. J. & Ma, X., 2005, In : Scripta Materialia. 52, 7, p. 627 - 632 6 p.

Research output: Contribution to journalArticleResearchpeer-review

19 Citations (Scopus)

An artificial neural network for predicting corrosion rate and hardness of magnesium alloys

Xia, X., Nie, J. F., Davies, C. H. J., Tang, W. N., Xu, S. W. & Birbilis, N., 15 Jan 2016, In : Materials & Design. 90, p. 1034-1043 10 p.

Research output: Contribution to journalArticleResearchpeer-review

9 Citations (Scopus)

An Assessment of the Interface Friction Factor using the Geometry of Upset Specimens

Sivaprasad, P. & Davies, C. H. J., 2005, In : Modelling and Simulation in Materials Science and Engineering. 13, 3, p. 355 - 360 6 p.

Research output: Contribution to journalArticleResearchpeer-review

69 Citations (Scopus)

An EBSD investigation of interstitial-free steel subjected to equal channel angular extrusion

Gazder, A., Cao, W., Davies, C. H. J. & Pereloma, E., 2008, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 497, p. 341 - 352 12 p.

Research output: Contribution to journalArticleResearchpeer-review

A New Metaphor for Deterministic Flow Stress

Davies, C. H. & Wynne, B. P., 1997, p. 883 - 889. 7 p.

Research output: Contribution to conferenceOtherOther

9 Citations (Scopus)

An in-situ neutron diffraction study of a multi-phase transformation and twinning-induced plasticity steel during cyclic loading

Saleh, A. A., Brown, D. W., Pereloma, E. V., Clausen, B., Davies, C. H. J., Tome, C. N. & Gazder, A. A., 2015, In : Applied Physics Letters. 106, 17, p. 1 - 5 5 p.

Research output: Contribution to journalArticleResearchpeer-review

An in-situ synchrotron study of the B2→B19′ phase transformation in a Ni-Ti alloy subjected to uniaxial monotonic tension

Bian, X., Saleh, A. A., Lynch, P. A., Davies, C. H. J., Pereloma, E. V. & Gazder, A. A., 16 Jan 2019, In : Materials Science and Engineering A. 743, p. 327-338 12 p.

Research output: Contribution to journalArticleResearchpeer-review

8 Citations (Scopus)

Anisotropy of tensile properties of extruded magnesium alloy AZ31

Xiong, F. & Davies, C. H. J., 18 Jul 2003, In : Materials Science Forum. 426-432, 4, p. 3605-3610 6 p.

Research output: Contribution to journalConference articleOther

Anistropy of tensile properties of extruded magnesium alloy AZ31

Xiong, F. J. & Davies, C. H. J., 2003, Materials Science Forum. Chandra, T., Torralba, J. M. & Sakai, T. (eds.). Switzerland: Trans Tech Publications, Vol. 426-432. p. 3605 - 3610 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

25 Citations (Scopus)

Annealing strengthening in a dilute Mg-Zn-Ca sheet alloy

Zeng, Z. R., Zhu, Y. M., Bian, M. Z., Xu, S. W., Davies, C. H. J., Birbilis, N. & Nie, J. F., 2015, In : Scripta Materialia. 107, p. 127 - 130 4 p.

Research output: Contribution to journalArticleResearchpeer-review

8 Citations (Scopus)

Application of Bainite Transformation Model to Estimation of Processing Window Boundaries for Mn-Mo-Cu Austempered Ductile Iron

Zahiri, S. H., Pereloma, E. V. & Davies, C. H. J., 2001, In : Materials Science and Technology. 17, p. 1563 - 1568 6 p.

Research output: Contribution to journalArticleResearchpeer-review

1 Citation (Scopus)

Application of the renormalization group method to the failure of fibre bundles

Davies, C. H. J., 1 Jan 1995, In : Journal of Materials Science Letters. 14, 24, p. 1813-1814 2 p.

Research output: Contribution to journalArticleResearchpeer-review

36 Citations (Scopus)

A survey of sensitization in 5xxx series aluminum alloys

Zhang, R., Knight, S. P., Holtz, R. L., Goswami, R., Davies, C. H. J. & Birbilis, N., Feb 2016, In : Corrosion. 72, 2, p. 144 - 159 16 p.

Research output: Contribution to journalArticleResearchpeer-review

Calibrating Simulations: The uses and limitations of EBSD Experiments

Hong, L., Sivaprasad, P. & Davies, C. H. J., 2001, Engineering Materials 2001. Pereloma, E. V. & Krishnamurthy, R. (eds.). Melbourne Vic Australia: The Institute of Materials Engineering Australasia, p. ii/51 - ii/56 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

18 Citations (Scopus)

Carbon nanotube/alumina/polyethersulfone hybrid hollow fiber membranes with enhanced mechanical and anti-fouling properties

Feng, Y., Wang, K., Davies, C. H. J. & Wang, H., 2015, In : Nanomaterials. 5, 3, p. 1366 - 1378 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
41 Citations (Scopus)

Cellular automation simulation of static recrystallization in cold-rolled AA1050

Davies, C. H. J. & Hong, L., 23 Apr 1999, In : Scripta Materialia. 40, 10, p. 1145-1150 6 p.

Research output: Contribution to journalArticleResearchpeer-review

6 Citations (Scopus)

Cellular automaton modelling of precipitate coarsening

Young, M. & Davies, C. H. J., 1999, In : Scripta Materialia. p. 697 - 701 5 p.

Research output: Contribution to journalArticleResearchpeer-review

Cellular automaton models of recrystallization

Davies, C. H. J., 2009, ASM Handbook, volume 22A: Fundamentals of modeling for metals processing. Furrer, D. U. & Semiatin, S. L. (eds.). USA: ASM International, p. 260 - 266 7 p.

Research output: Chapter in Book/Report/Conference proceedingChapter (Book)Researchpeer-review

24 Citations (Scopus)

Comparison of the Deformation Characteristics of a Ni-30wt% Fe Alloy and Plain Carbon Steel

Hurley, P. J., Muddle, B. C., Hodgson, P. D., Davies, C. H. J., Wynne, B. P., Cizek, P. & Hickson, M. R., 1998, p. 159 - 166. 8 p.

Research output: Contribution to conferenceOtherOther

Composite modelling of a two-phase titanium alloy

Zhong, J., Dargusch, M. S. & Davies, C., 2012, Proceedings of the 12th World Conference on Titanium (TI-2011): 19-24 June, 2011; Beijing China. Zhou, LI., Chang, H., Lu, Y. & Xu, D. (eds.). Beijing China: Science Press, Vol. 2. p. 867-869 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)

Composition effects on the corrosion of aluminium-free magnesium alloys

Xia, X., Birbilis, N., Davies, C. H. J. & Nie, J. F., 2012, Annual Conference of the Australasian Corrosion Association 2012: Melbourne, Victoria, Australia; 11-14 November 2012. Kerrimuir VIC Australia: Australasian Corrosion Association, p. 770-778 9 p. 142

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

8 Citations (Scopus)

Constitutive Behaviour of Composites of AA6061 and Alumina

Davies, C. H., Hawbolt, E. B., Samarasekera, I. V. & Brimacombe, J. K., 1997, In : Journal of Materials Processing Technology. p. 244 - 251 8 p.

Research output: Contribution to journalArticleResearchpeer-review

90 Citations (Scopus)

Construction of extrusion limit diagram for AZ31 magnesium alloy by FE simulation

Lapovok, R. Y., Barnett, M. & Davies, C. H. J., 2004, In : Journal of Materials Processing Technology. 146, 3, p. 408 - 414 7 p.

Research output: Contribution to journalArticleResearchpeer-review

1 Citation (Scopus)

Corrigendum to "An artificial neural network for predicting corrosion rate and hardness of magnesium alloys" [Mater. Des. 90 (2015) 1034-1043]

Xia, X., Nie, J. F., Davies, C. H. J., Tang, W. N., Xu, S. W. & Birbilis, N., 5 Feb 2016, In : Materials & Design. 91, p. 441 1 p.

Research output: Contribution to journalComment / DebateOtherpeer-review

40 Citations (Scopus)

Corrosion fatigue of a magnesium alloy in modified simulated body fluid

Jafari, S., Singh Raman, R. K. & Davies, C. H. J., 2015, In : Engineering Fracture Mechanics. 137, p. 2 - 11 10 p.

Research output: Contribution to journalArticleResearchpeer-review

144 Citations (Scopus)

Corrosion of magnesium alloys: the role of alloying

Gusieva, K., Davies, C. H. J., Scully, J. R. & Birbilis, N., 2015, In : International Materials Reviews. 60, 3, p. 169 - 194 26 p.

Research output: Contribution to journalArticleResearchpeer-review

27 Citations (Scopus)

Critical issues in the extrusion of particle reinforced metal matrix composites

Davies, C. H. J., 1 Jan 1995, In : Key Engineering Materials. 104-107, Pt 1, p. 447-458 12 p.

Research output: Contribution to journalArticleResearchpeer-review

32 Citations (Scopus)

Deep drawing behaviour of ultrafine grained copper: Modelling and experiment

Ma, X., Lapovok, R. Y., Gu, C., Molotnikov, A., Estrin, Y., Pereloma, E., Davies, C. H. J. & Hodgson, P. D., 2009, In : Journal of Materials Science. 44, 14, p. 3807 - 3812 6 p.

Research output: Contribution to journalArticleResearchpeer-review

254 Citations (Scopus)

Deformation and texture evolution in AZ31 magnesium alloy during uniaxial loading

Yi, S. M., Davies, C. H. J., Brokmeier, H-G., Bolmaro, R., Kainer, K. U. & Homeyer, J., 2006, In : Acta Materialia. 54, p. 549 - 562 14 p.

Research output: Contribution to journalArticleResearchpeer-review

Development of 〈1010〉 Texture During Tensile Test at Room Temperature

Zeng, Z., Bian, M., Xu, S., Davies, C. H. J., Birbilis, N. & Nie, J. F., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer, p. 521-524 4 p. (Minerals, Metals and Materials Series; vol. Part F8).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

67 Citations (Scopus)
9 Citations (Scopus)

Dynamics of the evolution of dislocation populations

Davies, C. H. J., 1 Feb 1994, In : Scripta Metallurgica et Materiala. 30, 3, p. 349-353 5 p.

Research output: Contribution to journalArticleResearchpeer-review

Effect of Carbon Content on the Hot Flow Stress and Dynamic Recrystallisation Behaviour of Plain Carbon Steels

Jaipal, J., Davies, C. H., Wynne, B. P., Collinson, D. C., Browning, A. & Hodgson, P. D., 1997, p. 539 - 545. 7 p.

Research output: Contribution to conferenceOtherOther

110 Citations (Scopus)
3 Citations (Scopus)

Effect of Composition and Prior Austenite Deformation on the Transformation Characteristics of Ultralow Carbon Microalloyed Steels

Cizek, P., Wynne, B. P., Davies, C. H. J., Muddle, B. C., Hodgson, P. D. & Brownrigg, A., 1998, p. 177 - 184. 8 p.

Research output: Contribution to conferenceOtherOther

53 Citations (Scopus)

Effect of grain refinement by severe plastic deformation on the next-neighbor misorientation distribution

Toth, L., Beausir, B., Gu, C., Estrin, Y., Scheerbaum, N. & Davies, C., 2010, In : Acta Materialia. 58, 20, p. 6706 - 6716 11 p.

Research output: Contribution to journalArticleResearchpeer-review

20 Citations (Scopus)

Effect of heat treatment on the microstructure and anisotropy in mechanical properties of A357 alloy produced by selective laser melting

Yang, K. V., Rometsch, P., Davies, C. H. J., Huang, A. & Wu, X., 15 Sep 2018, In : Materials and Design. 154, p. 275-290 16 p.

Research output: Contribution to journalArticleResearchpeer-review

238 Citations (Scopus)

Effect of microalloying with rare-earth elements on the texture of extruded magnesium-based alloys

Stanford, N., Atwell, D., Beer, A., Davies, C. H. J. & Barnett, M., 2008, In : Scripta Materialia. 59, 7, p. 772 - 775 4 p.

Research output: Contribution to journalArticleResearchpeer-review

8 Citations (Scopus)

Effect of microtexture on short crack propagation in two-phase titanium alloys

Zhang, K., Wu, X. & Davies, C. H. J., 1 Nov 2017, In : International Journal of Fatigue. 104, p. 206-220 15 p.

Research output: Contribution to journalArticleResearchpeer-review

12 Citations (Scopus)

Effect of nitrogen on formation of martensite-austenite constituent in low carbon steels

Staiger, M., Jessop, B., Hodgson, P. D., Brownrigg, A. & Davies, C. H. J., 1999, In : ISIJ International. p. 183 - 190 8 p.

Research output: Contribution to journalArticleResearchpeer-review

3 Citations (Scopus)

Effect of orientation and temperature on the mechanical properties of commercially pure titanium

Battaini, M., Pereloma, E. V. & Davies, C. H. J., 1 Jan 2007, In : Advanced Materials Research. 15-17, p. 941-946 6 p.

Research output: Contribution to journalConference articleOther

Effect of orientation and temperature on the mechanical properties of commercialy pure titantium

Battaini, M. J., Pereloma, E. & Davies, C. H. J., 2007, Thermec 06, Advanced Materials Research. Chandra, T., Tsuzaki, K., Militzer, M. & Ravindran, C. (eds.). Switzerland: Trans Tech Publications, Vol. 15-17. p. 941 - 946 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

111 Citations (Scopus)

Effect of plate-shaped particle distributions on the deformation behaviour of magnesium alloy AZ91 in tension and compression

Stanford, N., Geng, J., Chun, Y. B., Davies, C. H. J., Nie, J. F. & Barnett, M. R., 2012, In : Acta Materialia. 60, 1, p. 218 - 228 11 p.

Research output: Contribution to journalArticleResearchpeer-review