If you made any changes in Pure these will be visible here soon.

Research Output 1990 2019

2019

An in-situ synchrotron study of the B2→B19′ phase transformation in a Ni-Ti alloy subjected to uniaxial monotonic tension

Bian, X., Saleh, A. A., Lynch, P. A., Davies, C. H. J., Pereloma, E. V. & Gazder, A. A., 16 Jan 2019, In : Materials Science and Engineering A. 743, p. 327-338 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Magnesium extrusion alloys: a review of developments and prospects

Zeng, Z., Stanford, N., Davies, C. H. J., Nie, J. F. & Birbilis, N., 2 Jan 2019, In : International Materials Reviews. 64, 1, p. 27-62 36 p.

Research output: Contribution to journalReview ArticleOtherpeer-review

Multiple precipitation pathways in an Al-7Si-0.6Mg alloy fabricated by selective laser melting

Rao, J. H., Zhang, Y., Zhang, K., Huang, A., Davies, C. H. J. & Wu, X., 1 Feb 2019, In : Scripta Materialia. 160, p. 66-69 4 p.

Research output: Contribution to journalArticleResearchpeer-review

The processing and heat treatment of selective laser melted Al-7Si-0.6 Mg alloy

Rao, J. H., Rometsch, P., Wu, X. & Davies, C. H. J., 18 Feb 2019, Additive Manufacturing for the Aerospace Industry. Froes, F. & Boyer, R. (eds.). Amsterdam Netherlands: Elsevier, p. 143-161 19 p.

Research output: Chapter in Book/Report/Conference proceedingChapter (Book)Researchpeer-review

2018

Achieving exceptionally high strength in Mg–3Al–1Zn-0.3Mn extrusions via suppressing intergranular deformation

Zeng, Z. R., Zhu, Y. M., Liu, R. L., Xu, S. W., Davies, C. H. J., Nie, J. F. & Birbilis, N., 1 Nov 2018, In : Acta Materialia. 160, p. 97-108 12 p.

Research output: Contribution to journalArticleResearchpeer-review

A digital image correlation study of a NiTi alloy subjected to monotonic uniaxial and cyclic loading-unloading in tension

Bian, X., Saleh, A. A., Pereloma, E. V., Davies, C. H. J. & Gazder, A. A., 30 May 2018, In : Materials Science and Engineering A. 726, p. 102-112 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Effect of heat treatment on the microstructure and anisotropy in mechanical properties of A357 alloy produced by selective laser melting

Yang, K. V., Rometsch, P., Davies, C. H. J., Huang, A. & Wu, X., 15 Sep 2018, In : Materials and Design. 154, p. 275-290 16 p.

Research output: Contribution to journalArticleResearchpeer-review

Functionalized Boron Nitride Nanosheets: A Thermally Rearranged Polymer Nanocomposite Membrane for Hydrogen Separation

Wang, Y., Low, Z-X., Kim, S., Zhang, H., Chen, X., Hou, J., Seong, J. G., Lee, Y. M., Simon, G. P., Davies, C. H. J. & Wang, H., 3 Dec 2018, In : Angewandte Chemie - International Edition. 57, 49, p. 16056-16061 6 p.

Research output: Contribution to journalArticleResearchpeer-review

Low temperature texture development in Nd2Fe14B/ α -Fe nanocomposite magnets via equal channel angular pressing

Besley, L., Garitaonandia, J. S., Molotnikov, A., Kishimoto, H., Kato, A., Davies, C. & Suzuki, K., 1 May 2018, In : AIP Advances. 8, 5, 7 p., 056219.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Porosity formation mechanisms and fatigue response in Al-Si-Mg alloys made by selective laser melting

Yang, K. V., Rometsch, P., Jarvis, T., Rao, J., Cao, S., Davies, C. & Wu, X., 17 Jan 2018, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 712, p. 166-174 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Stress corrosion cracking of an extruded magnesium alloy (ZK21) in a simulated body fluid

Jafari, S., Raman, R. K. S. & Davies, C. H. J., 1 Oct 2018, In : Engineering Fracture Mechanics. 201, p. 47-55 9 p.

Research output: Contribution to journalArticleResearchpeer-review

2017

Development of 〈1010〉 Texture During Tensile Test at Room Temperature

Zeng, Z., Bian, M., Xu, S., Davies, C. H. J., Birbilis, N. & Nie, J. F., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer, p. 521-524 4 p. (Minerals, Metals and Materials Series; vol. Part F8).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Effect of microtexture on short crack propagation in two-phase titanium alloys

Zhang, K., Wu, X. & Davies, C. H. J., 1 Nov 2017, In : International Journal of Fatigue. 104, p. 206-220 15 p.

Research output: Contribution to journalArticleResearchpeer-review

Effect of the presence of macrozones on short crack propagation in forged two-phase titanium alloys

Zhang, K., Yang, K. V., Lim, S., Wu, X. & Davies, C. H. J., 1 Nov 2017, In : International Journal of Fatigue. 104, p. 1-11 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Evolution of microstructure, mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy prepared by direct laser fabrication

Wang, R., Zhang, K., Davies, C. & Wu, X., 15 Feb 2017, In : Journal of Alloys and Compounds. 694, p. 971-981 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Experiment-based modelling of grain boundary β-phase (Mg2Al3) evolution during sensitisation of aluminium alloy AA5083

Zhang, R., Steiner, M. A., Agnew, S. R., Kairy, S. K., Davies, C. H. J. & Birbilis, N., 2017, In : Scientific Reports. 7, 1, 14 p., 2961.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Microstructure evolution and strengthening mechanisms of aluminium alloy A357 manufactured by Selective Laser Melting

Rao, H., Wu, X. & Davies, C. H. J., 2017, 17th Australian International Aerospace Congress : AIAC 2017: Melbourne, Australia, 26-28 February, 2017. Barton, ACT: Engineers Australia, p. 110-115 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearch

Stress corrosion cracking and corrosion fatigue characterisation of MgZn1Ca0.3 (ZX10) in a simulated physiological environment

Jafari, S., Raman, R. K. S., Davies, C. H. J., Hofstetter, J., Uggowitzer, P. J. & Löffler, J. F., 1 Jan 2017, In : Journal of the Mechanical Behavior of Biomedical Materials. 65, p. 634-643 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Super-formable pure magnesium at room temperature

Zeng, Z., Nie, J-F., Xu, S. W., Davies, C. H. J. & Birbilis, N., 1 Dec 2017, In : Nature Communications. 8, 1, 6 p., 1330.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

The effect of Cu-based core-sheath configurations on the processing of Nd-Fe-B-based permanent magnets via equal-channel angular pressing

Besley, L., Zhang, H., Molotnikov, A., Kishimoto, H., Kato, T. A., Davies, C. & Suzuki, K., 8 May 2017, IOP Conference Series: Materials Science and Engineering: 7th International Conference on Nanomaterials by Severe Plastic Deformation, 2–7 July 2017, Sydney, Australia. Estrin, Y. & Liao, X. (eds.). Vol. 194. 6 p. 012043. (IOP Conference Series: Materials Science and Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Open Access
File

The effect of reversion heat treatment on the degree of sensitisation for aluminium alloy AA5083

Zhang, R., Zhang, Y., Yan, Y., Thomas, S., Davies, C. H. J. & Birbilis, N., 1 Sep 2017, In : Corrosion Science. 126, p. 324-333 10 p.

Research output: Contribution to journalArticleResearchpeer-review

The origins for tensile properties of selective laser melted aluminium alloy A357

Rao, J. H., Zhang, Y., Fang, X., Chen, Y., Wu, X. & Davies, C. H. J., 1 Oct 2017, In : Additive Manufacturing. 17, p. 113-122 10 p.

Research output: Contribution to journalArticleResearchpeer-review

2016

An artificial neural network for predicting corrosion rate and hardness of magnesium alloys

Xia, X., Nie, J. F., Davies, C. H. J., Tang, W. N., Xu, S. W. & Birbilis, N., 15 Jan 2016, In : Materials & Design. 90, p. 1034-1043 10 p.

Research output: Contribution to journalArticleResearchpeer-review

A survey of sensitization in 5xxx series aluminum alloys

Zhang, R., Knight, S. P., Holtz, R. L., Goswami, R., Davies, C. H. J. & Birbilis, N., Feb 2016, In : Corrosion. 72, 2, p. 144 - 159 16 p.

Research output: Contribution to journalArticleResearchpeer-review

Corrigendum to "An artificial neural network for predicting corrosion rate and hardness of magnesium alloys" [Mater. Des. 90 (2015) 1034-1043]

Xia, X., Nie, J. F., Davies, C. H. J., Tang, W. N., Xu, S. W. & Birbilis, N., 5 Feb 2016, In : Materials & Design. 91, p. 441 1 p.

Research output: Contribution to journalComment / DebateOtherpeer-review

Effect of processing parameters on the magnetic properties and macrotexture of a Nd13.5Fe73.8Co6.7B5.6Ga0.4 alloy processed by equal channel angular pressing with back pressure

Onal, E., Lapovok, R., Kishimoto, H., Kato, A., Davies, C. H. J. & Suzuki, K., 1 Jul 2016, In : IEEE Transactions on Magnetics. 52, 7, 4 p., 2101004.

Research output: Contribution to journalArticleOtherpeer-review

Effects of dilute additions of Zn and Ca on ductility of magnesium alloy sheet

Zeng, Z. R., Bian, M. Z., Xu, S. W., Davies, C. H. J., Birbilis, N. & Nie, J. F., 30 Sep 2016, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 674, p. 459-471 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Enhanced Tensile Properties of Mg Sheets by a Unique Thermomechanical Processing Method

Bian, M., Zeng, Z., Xu, S., Tang, W., Davies, C. H. J., Birbilis, N. & Nie, J., 1 Dec 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47, 12, p. 5709-5713 5 p.

Research output: Contribution to journalArticleResearchpeer-review

Exploring the electrochemistry of 6xxx series aluminium alloys as a function of Si to Mg ratio, Cu content, ageing conditions and microstructure

Kairy, S. K., Rometsch, P. A., Diao, K., Nie, J. F., Davies, C. H. J. & Birbilis, N., 1 Feb 2016, In : Electrochimica Acta. 190, p. 92-103 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Improving Formability of Mg–Ca–Zr Sheet Alloy by Microalloying of Zn

Bian, M. Z., Zeng, Z. R., Xu, S. W., Zhu, S. M., Zhu, Y. M., Davies, C. H. J., Birbilis, N. & Nie, J. F., 1 Oct 2016, In : Advanced Engineering Materials. 18, 10, p. 1763-1769 7 p.

Research output: Contribution to journalArticleResearchpeer-review

On the feasibility of partial slip reversal and de-twinning during the cyclic loading of TWIP steel

Saleh, A. A., Clausen, B., Brown, D. W., Pereloma, E. V., Davies, C. H. J., Tomé, C. N. & Gazder, A. A., 1 Nov 2016, In : Materials Letters. 182, p. 294-297 4 p.

Research output: Contribution to journalArticleResearchpeer-review

Texture evolution during static recrystallization of cold-rolled magnesium alloys

Zeng, Z. R., Zhu, Y. M., Xu, S. W., Bian, M. Z., Davies, C. H. J., Birbilis, N. & Nie, J. F., 15 Feb 2016, In : Acta Materialia. 105, p. 479-494 16 p.

Research output: Contribution to journalArticleResearchpeer-review

The influence of grain size and grain orientation on sensitization in AA5083

Zhang, R., Gupta, R. K., Davies, C. H. J., Hodge, A. M., Tort, M., Xia, K. & Birbilis, N., 1 Feb 2016, In : Corrosion. 72, 2, p. 160-168 9 p.

Research output: Contribution to journalArticleResearchpeer-review

The influence of processing parameters on aluminium alloy A357 manufactured by selective laser melting

Rao, H., Giet, S., Yang, K., Wu, X. & Davies, C. H. J., 2016, In : Materials & Design. 109, p. 334-346 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Understanding the Origins of Intergranular Corrosion in Copper-Containing Al-Mg-Si Alloys

Kairy, S. K., Alam, T., Rometsch, P. A., Davies, C. H. J., Banerjee, R. & Birbilis, N., 1 Mar 2016, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 47, 3, p. 985-989 5 p.

Research output: Contribution to journalArticleResearchpeer-review

2015

An in-situ neutron diffraction study of a multi-phase transformation and twinning-induced plasticity steel during cyclic loading

Saleh, A. A., Brown, D. W., Pereloma, E. V., Clausen, B., Davies, C. H. J., Tome, C. N. & Gazder, A. A., 2015, In : Applied Physics Letters. 106, 17, p. 1 - 5 5 p.

Research output: Contribution to journalArticleResearchpeer-review

Annealing strengthening in a dilute Mg-Zn-Ca sheet alloy

Zeng, Z. R., Zhu, Y. M., Bian, M. Z., Xu, S. W., Davies, C. H. J., Birbilis, N. & Nie, J. F., 2015, In : Scripta Materialia. 107, p. 127 - 130 4 p.

Research output: Contribution to journalArticleResearchpeer-review

Carbon nanotube/alumina/polyethersulfone hybrid hollow fiber membranes with enhanced mechanical and anti-fouling properties

Feng, Y., Wang, K., Davies, C. H. J. & Wang, H., 2015, In : Nanomaterials. 5, 3, p. 1366 - 1378 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Corrosion fatigue of a magnesium alloy in modified simulated body fluid

Jafari, S., Singh Raman, R. K. & Davies, C. H. J., 2015, In : Engineering Fracture Mechanics. 137, p. 2 - 11 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Corrosion of magnesium alloys: the role of alloying

Gusieva, K., Davies, C. H. J., Scully, J. R. & Birbilis, N., 2015, In : International Materials Reviews. 60, 3, p. 169 - 194 26 p.

Research output: Contribution to journalArticleResearchpeer-review

Fatigue crack initiation in as forged Ti-6Al-4V bars with macrozones present

Zhang, K., Yang, K., Huang, A., Wu, X. & Davies, C. H. J., 2015, In : International Journal of Fatigue. 80, p. 288 - 297 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Influence of composition and processing on the corrosion of magnesium alloys containing binary and ternary additions of zinc and strontium

Xia, X., Davies, C. H. J., Nie, J. F. & Birbilis, N., 2015, In : Corrosion. 71, 1, p. 38 - 49 12 p.

Research output: Contribution to journalArticleResearchpeer-review

Inorganic particle enhanced polymer hollow fiber membranes with high mechanical properties

Feng, Y., Shamsaei, E., Davies, C. H. J. & Wang, H., 2015, In : Materials Chemistry and Physics. 167, p. 209 - 218 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Microstructural and magnetic properties of Nd-Fe-B alloys processed by equal-channel angular pressing

Onal, E., Lapovok, R., Kishimoto, H., Kato, A., Davies, C. H. J. & Suzuki, K., 2015, In : Journal of Applied Physics. 117, 17, p. 1 - 4 4 p.

Research output: Contribution to journalArticleResearchpeer-review

Texture evolution during cold rolling of dilute Mg alloys

Zeng, Z. R., Bian, M. Z., Xu, S. W., Davies, C. H. J., Birbilis, N. & Nie, J. F., 2015, In : Scripta Materialia. 108, p. 6 - 10 5 p.

Research output: Contribution to journalArticleResearchpeer-review

The effect of simulated thermomechanical processing on the transformation behavior and microstructure of a low-carbon Mo-Nb linepipe steel

Cizek, P., Wynne, B. P., Davies, C. H. J. & Hodgson, P. D., Jan 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 46, 1, p. 407 - 425 19 p.

Research output: Contribution to journalArticleResearchpeer-review

The influence of copper additions and aging on the microstructure and metastable pitting of Al-Mg-Si alloys

Kairy, S. K., Rometsch, P. A., Davies, C. H. J. & Birbilis, N., 2015, In : Corrosion. 71, 11, p. 1304 - 1307 4 p.

Research output: Contribution to journalArticleResearchpeer-review

The influence of low levels of zinc, calcium, gadolinium, strontium, and zirconium on the corrosion of magnesium for wrought applications

Xia, X., Nie, J. F., Davies, C. H. J., Tang, W. N., Xu, S. W. & Birbilis, N., 2015, In : Corrosion. 71, 11, p. 1370 - 1386 17 p.

Research output: Contribution to journalArticleResearchpeer-review