Aijun Huang

Assoc Professor

Accepting PhD Students

20032019
If you made any changes in Pure these will be visible here soon.

Research Output 2003 2019

Filter
Conference Paper

Ageing of C-containing and C-free Ti-15Cr and Ti-15-3

Wu, X., Del Prado, J., Hu, D., Huang, A., Chu, M. Q. & Loretto, M. H., 2007, Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 4 ed. Vol. 539-543. p. 3595-3600 6 p. (Materials Science Forum; vol. 539-543, no. PART 4).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Deformation of PST crystals of Ti46A18Nb and Ti46A18Ta

Guo, Y., Liu, R., Jin, H., Yang, R., Huang, A. & Loretto, M., 1 Jan 2014, Gamma Titanium Aluminide Alloys 2014. Kim, Y-W., Smarsly, W., Appel, F., Dimiduk, D. M. & Lin, J. (eds.). Minerals Metals and Materials Society, p. 135-142 8 p. (TMS Annual Meeting; vol. 2014-February).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

1 Citation (Scopus)

Sensitivity analysis of process parameters for developing an improved open die forging process

Cheng, Y., Yang, X., Lu, Q., Lim, C. V. S. & Huang, A., 2014, 15th International Conference on Metal Forming 2014: Palermo, Italy; 21-24 September 2014. Micari, F. & Fratini, L. (eds.). Switzerland: Trans Tech Publications, p. 231-238 8 p. (Key Engineering Materials; vol. 622-623).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2 Citations (Scopus)

The influence of cooling rate and alloy composition on the formation of borides during solidification of boron-containing TiAl alloys

Yang, C., Hu, D., Wu, X., Huang, A. & Dixon, M., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Science Press, Vol. 2. p. 1416-1420 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2 Citations (Scopus)

The Influence of loading directions on the failure of the bicrystal in a-ti with grain-boundary penetrating dislocations

Wang, H., Xu, D. S., Yang, R., Rugg, D. & Huang, A. J., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 2. p. 1219-1222 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

The influence of surface roughness on the fatigue performance of selective laser melted aluminium alloy A357

Rao, J. H., Zhang, K., Rometsch, P., Huang, A. & Wu, X., 2018, Proceedings of the 16th International Aluminum Alloys Conference (ICAA16) 2018. Canadian Institute of Mining, Metallurgy and Petroleum

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

The role of Jominy tests in understanding transformations in TiAl-based alloys

Hu, D., Loretto, M. H., Huang, A. & Wu, X., 2006, Titanium Alloys for High Temperature Applications: A Symposium Dedicated to the Memory of Dr. Martin Blackburn - Proceedings of Symp. sponsored by the Titanium Committee of the Structural Materials. Vol. 2006. p. 25-33 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Three-dimensional investigation of the microtexture near tensile crack tip in Ti-6Al-4V

Xu, X., Tse, Y. Y., West, G. D. & Huang, A., 1 Jan 2012, Materials Processing and Interfaces. Minerals Metals and Materials Society, p. 911-917 7 p. (TMS Annual Meeting; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther