20032019
If you made any changes in Pure these will be visible here soon.

Research Output 2003 2019

Filter
Conference Paper
2018

The influence of surface roughness on the fatigue performance of selective laser melted aluminium alloy A357

Rao, J. H., Zhang, K., Rometsch, P., Huang, A. & Wu, X., 2018, Proceedings of the 16th International Aluminum Alloys Conference (ICAA16) 2018. Canadian Institute of Mining, Metallurgy and Petroleum

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

2014

Deformation of PST crystals of Ti46A18Nb and Ti46A18Ta

Guo, Y., Liu, R., Jin, H., Yang, R., Huang, A. & Loretto, M., 1 Jan 2014, Gamma Titanium Aluminide Alloys 2014. Kim, Y-W., Smarsly, W., Appel, F., Dimiduk, D. M. & Lin, J. (eds.). Minerals Metals and Materials Society, p. 135-142 8 p. (TMS Annual Meeting; vol. 2014-February).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Sensitivity analysis of process parameters for developing an improved open die forging process

Cheng, Y., Yang, X., Lu, Q., Lim, C. V. S. & Huang, A., 2014, 15th International Conference on Metal Forming 2014: Palermo, Italy; 21-24 September 2014. Micari, F. & Fratini, L. (eds.). Switzerland: Trans Tech Publications, p. 231-238 8 p. (Key Engineering Materials; vol. 622-623).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2012

The influence of cooling rate and alloy composition on the formation of borides during solidification of boron-containing TiAl alloys

Yang, C., Hu, D., Wu, X., Huang, A. & Dixon, M., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Science Press, Vol. 2. p. 1416-1420 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

The Influence of loading directions on the failure of the bicrystal in a-ti with grain-boundary penetrating dislocations

Wang, H., Xu, D. S., Yang, R., Rugg, D. & Huang, A. J., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 2. p. 1219-1222 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Three-dimensional investigation of the microtexture near tensile crack tip in Ti-6Al-4V

Xu, X., Tse, Y. Y., West, G. D. & Huang, A., 1 Jan 2012, Materials Processing and Interfaces. Minerals Metals and Materials Society, p. 911-917 7 p. (TMS Annual Meeting; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

2007

Ageing of C-containing and C-free Ti-15Cr and Ti-15-3

Wu, X., Del Prado, J., Hu, D., Huang, A., Chu, M. Q. & Loretto, M. H., 2007, Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 4 ed. Vol. 539-543. p. 3595-3600 6 p. (Materials Science Forum; vol. 539-543, no. PART 4).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2006

The role of Jominy tests in understanding transformations in TiAl-based alloys

Hu, D., Loretto, M. H., Huang, A. & Wu, X., 2006, Titanium Alloys for High Temperature Applications: A Symposium Dedicated to the Memory of Dr. Martin Blackburn - Proceedings of Symp. sponsored by the Titanium Committee of the Structural Materials. Vol. 2006. p. 25-33 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review