Aijun Huang

Assoc Professor

Accepting PhD Students

20032019
If you made any changes in Pure these will be visible here soon.

Research Output 2003 2019

2019
1 Citation (Scopus)

Effects of boron addition on microstructures and mechanical properties of Ti-6Al-4V manufactured by direct laser deposition

Zhang, K., Tian, X., Bermingham, M., Rao, J., Jia, Q., Zhu, Y., Wu, X., Cao, S. & Huang, A., 15 Dec 2019, In : Materials & Design. 184, 17 p., 108191.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Experimental and statistical analysis on process parameters and surface roughness relationship for selective laser melting of Hastelloy X

Tian, Y., Tomus, D., Huang, A. & Wu, X., 12 Aug 2019, In : Rapid Prototyping Journal. 25, 7, p. 1309-1318 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Improving fatigue performances of selective laser melted Al-7Si-0.6Mg alloy via defects control

Rao, J. H., Zhang, Y., Huang, A., Wu, X. & Zhang, K., 1 Dec 2019, In : International Journal of Fatigue. 129, 105215, 10 p., 105215.

Research output: Contribution to journalArticleResearchpeer-review

Microstructural characterization of binary microstructure pattern in selective laser-melted Ti-6Al-4V

Neikter, M., Huang, A. & Wu, X., 1 Sep 2019, In : International Journal of Advanced Manufacturing Technology. 104, 1-4, p. 1381-1391 11 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
8 Citations (Scopus)

Multiple precipitation pathways in an Al-7Si-0.6Mg alloy fabricated by selective laser melting

Rao, J. H., Zhang, Y., Zhang, K., Huang, A., Davies, C. H. J. & Wu, X., 1 Feb 2019, In : Scripta Materialia. 160, p. 66-69 4 p.

Research output: Contribution to journalArticleResearchpeer-review

Selective laser melted Al-7Si-0.6Mg alloy with in-situ precipitation via platform heating for residual strain removal

Rao, J. H., Zhang, Y., Zhang, K., Wu, X. & Huang, A., 15 Nov 2019, In : Materials & Design. 182, 11 p., 108005.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
8 Citations (Scopus)

Selective laser melting of a high strength Al-Mn-Sc alloy: alloy design and strengthening mechanisms

Jia, Q., Rometsch, P., Kürnsteiner, P., Chao, Q., Huang, A., Weyland, M., Bourgeois, L. & Wu, X., 1 Jun 2019, In : Acta Materialia. 171, p. 108-118 11 p.

Research output: Contribution to journalArticleResearchpeer-review

2 Citations (Scopus)

Static coarsening behaviour of lamellar microstructure in selective laser melted Ti–6Al–4V

Cao, S., Hu, Q., Huang, A., Chen, Z., Sun, M., Zhang, J., Fu, C., Jia, Q., Lim, C. V. S., Boyer, R. R., Yang, Y. & Wu, X., 1 Aug 2019, In : Journal of Materials Science and Technology. 35, 8, p. 1578-1586 9 p.

Research output: Contribution to journalArticleResearchpeer-review

2018
6 Citations (Scopus)

Characterisation of AlScZr and AlErZr alloys processed by rapid laser melting

Jia, Q., Rometsch, P., Cao, S., Zhang, K., Huang, A. & Wu, X., 1 Jul 2018, In : Scripta Materialia. 151, p. 42-46 5 p.

Research output: Contribution to journalArticleResearchpeer-review

23 Citations (Scopus)

Effect of heat treatment on the microstructure and anisotropy in mechanical properties of A357 alloy produced by selective laser melting

Yang, K. V., Rometsch, P., Davies, C. H. J., Huang, A. & Wu, X., 15 Sep 2018, In : Materials & Design. 154, p. 275-290 16 p.

Research output: Contribution to journalArticleResearchpeer-review

30 Citations (Scopus)

Role of martensite decomposition in tensile properties of selective laser melted Ti-6Al-4V

Cao, S., Chu, R., Zhou, X., Yang, K., Jia, Q., Lim, C. V. S., Huang, A. & Wu, X., 5 May 2018, In : Journal of Alloys and Compounds. 744, p. 357-363 7 p.

Research output: Contribution to journalArticleResearchpeer-review

The influence of surface roughness on the fatigue performance of selective laser melted aluminium alloy A357

Rao, J. H., Zhang, K., Rometsch, P., Huang, A. & Wu, X., 2018, Proceedings of the 16th International Aluminum Alloys Conference (ICAA16) 2018. Canadian Institute of Mining, Metallurgy and Petroleum

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

2016
11 Citations (Scopus)

Fatigue crack growth behavior of beta-annealed Ti-6Al-2Sn-4Zr-xMo (x = 2, 4 and 6) alloys: Influence of microstructure and stress ratio

Qiu, J., Feng, X., Ma, Y., Lei, J., Huang, A., Rugg, D. & Yang, R., 1 Feb 2016, In : International Journal of Fatigue. 83, p. 150-160 11 p.

Research output: Contribution to journalArticleResearchpeer-review

2015
20 Citations (Scopus)

Fatigue crack initiation in as forged Ti-6Al-4V bars with macrozones present

Zhang, K., Yang, K., Huang, A., Wu, X. & Davies, C. H. J., 2015, In : International Journal of Fatigue. 80, p. 288 - 297 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Microstructure and texture evolution in double-cone samples of Ti6Al4V alloy with colony preform microstructure

Yang, K. V., Lim, C. V. S., Zhang, K., Sun, J., Yang, X., Huang, A., Wu, X. & Davies, C. H., Dec 2015, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 46A, 12, p. 5989-6002 14 p.

Research output: Contribution to journalArticleResearchpeer-review

2014
43 Citations (Scopus)

A Comparative Study on Dwell Fatigue of Ti-6Al-2Sn-4Zr-xMo (x = 2 to 6) Alloys on a Microstructure-Normalized Basis

Qiu, J., Ma, Y., Lei, J., Liu, Y., Huang, A., Rugg, D. & Yang, R., 24 Oct 2014, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 45A, 13, p. 6075-6087 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Deformation of PST crystals of Ti46A18Nb and Ti46A18Ta

Guo, Y., Liu, R., Jin, H., Yang, R., Huang, A. & Loretto, M., 1 Jan 2014, Gamma Titanium Aluminide Alloys 2014. Kim, Y-W., Smarsly, W., Appel, F., Dimiduk, D. M. & Lin, J. (eds.). Minerals Metals and Materials Society, p. 135-142 8 p. (TMS Annual Meeting; vol. 2014-February).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

1 Citation (Scopus)

Sensitivity analysis of process parameters for developing an improved open die forging process

Cheng, Y., Yang, X., Lu, Q., Lim, C. V. S. & Huang, A., 2014, 15th International Conference on Metal Forming 2014: Palermo, Italy; 21-24 September 2014. Micari, F. & Fratini, L. (eds.). Switzerland: Trans Tech Publications, p. 231-238 8 p. (Key Engineering Materials; vol. 622-623).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2013
12 Citations (Scopus)

Solidification and grain refinement in Ti45Al2Mn2Nb1B subjected to fast cooling

Yang, C., Hu, D., Huang, A. & Dixon, M., 1 Jan 2013, In : Intermetallics. 32, p. 64-71 8 p.

Research output: Contribution to journalArticleResearchpeer-review

2012
26 Citations (Scopus)

Effect of boron concentration on phase transformation texture in as-solidified Ti44Al8NbxB

Yang, C., Jiang, H., Hu, D., Huang, A. & Dixon, M., 1 Jul 2012, In : Scripta Materialia. 67, 1, p. 85-88 4 p.

Research output: Contribution to journalArticleResearchpeer-review

53 Citations (Scopus)

Grain refinement in beta-solidifying Ti44Al8Nb1B

Hu, D., Yang, C., Huang, A., Dixon, M. & Hecht, U., Apr 2012, In : Intermetallics. 23, p. 49-56 8 p.

Research output: Contribution to journalArticleResearchpeer-review

19 Citations (Scopus)

Microstructures and tensile properties of hot isostatic pressed Ti4522XD powders

Yang, C., Hu, D., Wu, X., Huang, A. & Dixon, M., 2012, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 534, p. 268 - 276 9 p.

Research output: Contribution to journalArticleResearchpeer-review

41 Citations (Scopus)

Solidification and grain refinement in Ti45Al2Mn2Nb1B

Hu, D., Yang, C., Huang, A., Dixon, M. & Hecht, U., 1 Mar 2012, In : Intermetallics. 22, p. 68-76 9 p.

Research output: Contribution to journalArticleResearchpeer-review

2 Citations (Scopus)

The influence of cooling rate and alloy composition on the formation of borides during solidification of boron-containing TiAl alloys

Yang, C., Hu, D., Wu, X., Huang, A. & Dixon, M., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Science Press, Vol. 2. p. 1416-1420 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2 Citations (Scopus)

The Influence of loading directions on the failure of the bicrystal in a-ti with grain-boundary penetrating dislocations

Wang, H., Xu, D. S., Yang, R., Rugg, D. & Huang, A. J., 2012, Ti 2011 - Proceedings of the 12th World Conference on Titanium. Vol. 2. p. 1219-1222 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Three-dimensional investigation of the microtexture near tensile crack tip in Ti-6Al-4V

Xu, X., Tse, Y. Y., West, G. D. & Huang, A., 1 Jan 2012, Materials Processing and Interfaces. Minerals Metals and Materials Society, p. 911-917 7 p. (TMS Annual Meeting; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

2009
84 Citations (Scopus)

Microstructures and tensile properties of massively transformed and aged Ti46Al8Nb and Ti46Al8Ta alloys

Saage, H., Huang, A., Hu, D., Loretto OBE, M. & Wu, X., 2009, In : Intermetallics. 17, 1-2, p. 32 - 38 7 p.

Research output: Contribution to journalArticleResearchpeer-review

35 Citations (Scopus)

Oxidation-induced embrittlement of TiAl alloys

Wu, X., Huang, A., Hu, D. & Loretto OBE, M., 2009, In : Intermetallics. 17, 7, p. 540 - 552 13 p.

Research output: Contribution to journalArticleResearchpeer-review

15 Citations (Scopus)

The formation of grain boundary gamma during cooling of Ti46Al8Nb

Huang, A., Hu, D., Loretto OBE, M. & Wu, X., 2009, In : Intermetallics. 17, 5, p. 285 - 290 6 p.

Research output: Contribution to journalArticleResearchpeer-review

2008
2 Citations (Scopus)

Factors influencing the return to equilibrium of quenched beta Ti alloys and of massively transformed TiAl-based alloys

Loretto OBE, M., Huang, A., Hu, D. & Wu, X., 2008, In : Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science. 39, 7, p. 1480 - 1485 6 p.

Research output: Contribution to journalArticleResearchpeer-review

2007

Ageing of C-containing and C-free Ti-15Cr and Ti-15-3

Wu, X., Del Prado, J., Hu, D., Huang, A., Chu, M. Q. & Loretto, M. H., 2007, Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 4 ed. Vol. 539-543. p. 3595-3600 6 p. (Materials Science Forum; vol. 539-543, no. PART 4).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

80 Citations (Scopus)

On the massive phase transformation regime in TiAl alloys: The alloying effect on massive/lamellar competition

Hu, D., Huang, A. & Wu, X., 2007, In : Intermetallics. 15, 3, p. 327 - 332 6 p.

Research output: Contribution to journalArticleResearchpeer-review

30 Citations (Scopus)

The influence of interrupted cooling on the massive transformation in Ti46Al8Nb

Huang, A., Hu, D., Wu, X. & Loretto, M. H., Sep 2007, In : Intermetallics. 15, 9, p. 1147-1155 9 p.

Research output: Contribution to journalArticleResearchpeer-review

18 Citations (Scopus)

The influence of pressure on solid-state transformations in Ti-46Al-8Nb

Huang, A., Hu, D., Loretto OBE, M., Mei, J. & Wu, X., 2007, In : Scripta Materialia. 56, 4, p. 253 - 256 4 p.

Research output: Contribution to journalArticleResearchpeer-review

2006
37 Citations (Scopus)

Analytical electron microscopy of C-free and C-containing Ti-15-3

Wu, X., del Prado, J., Li, Q., Huang, A., Hu, D. & Loretto OBE, M., 2006, In : Acta Materialia. 54, 20, p. 5433 - 5448 16 p.

Research output: Contribution to journalArticleResearchpeer-review

9 Citations (Scopus)

Microstructural study of pre-yielding and pre-yield cracking in TiAl-based alloys

Wu, X., Jiang, H., Huang, A., Hu, D., Mota-Solis, N. & Loretto OBE, M., 2006, In : Intermetallics. 14, 1, p. 91 - 101 11 p.

Research output: Contribution to journalArticleResearchpeer-review

24 Citations (Scopus)

Pre-yielding and pre-yield cracking in TiAl-based alloys

Hu, D., Huang, A., Jiang, H., Mota-Solis, N. & Wu, X., 2006, In : Intermetallics. 14, 1, p. 82 - 90 9 p.

Research output: Contribution to journalArticleResearchpeer-review

4 Citations (Scopus)

Sulphide/phosphide precipitation associated with carbon saturation in Ti-15V-3Cr-3Sn-3Al-0.2C

Hu, D., Huang, A., Song, X. & Wu, X., 2006, In : Journal of Alloys and Compounds. 413, 1-2, p. 77 - 84 8 p.

Research output: Contribution to journalArticleResearchpeer-review

5 Citations (Scopus)

Synthesis, microstructure, and mechanical properties of a novel Ti 2AlC/TiC/Al2O3 in situ composite

Zhang, D. L., Cai, Z. H., Huang, A. J. & Yang, R., Nov 2006, In : Journal of the American Ceramic Society. 89, 11, p. 3325-3330 6 p.

Research output: Contribution to journalArticleResearchpeer-review

33 Citations (Scopus)

The effect of boron and alpha grain size on the massive transformation in Ti-46Al-8Nb-xB alloys

Hu, D., Huang, A., Novovic, D. & Wu, X., 2006, In : Intermetallics. 14, 7, p. 818 - 825 8 p.

Research output: Contribution to journalArticleResearchpeer-review

The role of Jominy tests in understanding transformations in TiAl-based alloys

Hu, D., Loretto, M. H., Huang, A. & Wu, X., 2006, Titanium Alloys for High Temperature Applications: A Symposium Dedicated to the Memory of Dr. Martin Blackburn - Proceedings of Symp. sponsored by the Titanium Committee of the Structural Materials. Vol. 2006. p. 25-33 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

21 Citations (Scopus)

The role of oxygen content and cooling rate on transformations in TiAl-based alloys

Huang, A., Loretto OBE, M., Hu, D., Liu, K. & Wu, X., 2006, In : Intermetallics. 14, 7, p. 838 - 847 10 p.

Research output: Contribution to journalArticleResearchpeer-review

2005
7 Citations (Scopus)

Determining continuous cooling phase transformation behaviour in Ti-46Al-8Nb using Jominy end quenching

Hu, D., Huang, A. J., Grégoire, A., Li, X. Y., Wu, X. & Loretto, M. H., 2005, In : Materials Forum. 29, p. 172-175 4 p.

Research output: Contribution to journalArticleResearchpeer-review

23 Citations (Scopus)

Evolution of microstructure of full lamellar titanium alloy BT18Y solutionized at α + β phase field

Yang, Y., Xu, F., Huang, A. & Li, G., 1 Jul 2005, In : Jinshu Xuebao/Acta Metallurgica Sinica. 41, 7, p. 713-720 8 p.

Research output: Contribution to journalArticleResearchpeer-review

1 Citation (Scopus)

Heat treatment of cast TiAl-based alloys

Loretto, M. H., Hu, D., Huang, A. J. & Wu, X., 5 Sep 2005, In : Materials Forum. 29, p. 17-20 4 p.

Research output: Contribution to journalArticleResearchpeer-review

In situ observation of the grain evolution in BT18Y titanium alloy

Yang, Y., Xu, F., Huang, A. & Li, G., 1 Oct 2005, In : Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering. 34, SUPPL. 3, p. 428-429 2 p.

Research output: Contribution to journalArticleResearchpeer-review

Investigation of the relationship between parameters of equiaxed α phase and compositions in BT8 titanium alloy

Yang, Y., Xu, F., Li, C., Huang, A. & Li, G., 1 Oct 2005, In : Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering. 34, SUPPL. 3, 1 p.

Research output: Contribution to journalArticleOtherpeer-review

3 Citations (Scopus)

Room-temperature tensile plasticity of BT18y titanium alloy with equiaxed structure and fully lamellar structure

Yang, Y., Huang, A. J., Xu, F. & Li, G. P., 1 May 2005, In : Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals. 15, 5, p. 768-774 7 p.

Research output: Contribution to journalArticleResearchpeer-review

13 Citations (Scopus)

TEM characterisation of Widmanstatten microstructures in TiAl-based alloys

Hu, D., Huang, A. & Wu, X., 2005, In : Intermetallics. 13, 2, p. 211 - 216 6 p.

Research output: Contribution to journalArticleResearchpeer-review