Research Output 1978 2020

Filter
Conference Paper
2019

Deep learning AI for corrosion detection

Nash, W., Drummond, T. & Birbilis, N., 2019, Corrosion 2019. NACE International, 11 p. (NACE - International Corrosion Conference Series).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Isometric tilt grain boundaries and solute segregation in a deformed Mg–Zn–Ca alloy

Zhu, Y. M. & Nie, J. F., 1 Jan 2019, Magnesium Technology, 2019. Neelameggham, N. R., Jordon, J. B., Orlov, D. & Joshi, V. V. (eds.). Springer, p. 263-266 4 p. (Minerals, Metals and Materials Series).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

1 Citation (Scopus)

Structural and electrochemical mechanism study of layered MoTe2 anode material for sodium-ion battery

Panda, M. R., Anish Raj, K., Singh, M. N., Sagdeo, A., Sinha, A. K., Bao, Q. & Mitra, S., 11 Jul 2019, DAE Solid State Physics Symposium 2018. Biswas, A., Sharma, V. K. & Yusuf, S. M. (eds.). American Institute of Physics, 030615. (AIP Conference Proceedings; vol. 2115).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Open Access
2018
4 Citations (Scopus)

Development of magnesium-rare earth die-casting alloys

Easton, M., Gibson, M. A., Zhu, S., Abbott, T., Nie, J. F., Bettles, C. J. & Savage, G., 2018, Magnesium Technology 2018. Solanki, K. N., Joshi, V., Neelameggham, N. R. & Orlov, D. (eds.). Springer, p. 329-336 8 p. (Minerals, Metals and Materials Series; vol. Part F7).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

3 Citations (Scopus)

Electrochemical investigation of MoTe2/rGO composite materials for sodium-ion battery application

Panda, M. R., Anish Raj, K., Sarkar, A., Bao, Q. & Mitra, S., 11 May 2018, International Conference on Nanomaterials for Energy Conversion and Storage Applications, NECSA 2018. Ray, A., Pati, R. & Mukhopadhyay, I. (eds.). American Institute of Physics, 5 p. 030033. (AIP Conference Proceedings; vol. 1961).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Graphene based heterostructures used for high performance broadband photodetectors

Li, S., Sun, T., Li, P., Yu, W., Liu, Y. & Bao, Q., 4 Jan 2018, 2017 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications, IMWS-AMP 2017. IEEE, Institute of Electrical and Electronics Engineers, p. 1-3 3 p. (2017 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications, IMWS-AMP 2017; vol. 2018-January).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Leak-before-break (LBB) analysis and failure processes for small-diameter cast iron pipes

Jiang, R., Weerasinghe, D., Zhang, C., Zhao, X. L., Kodikara, J. & Hutchinson, C. R., 1 Jan 2018, Tubular Structures XVI - Proceedings of the 16th International Symposium on Tubular Structures, ISTS 2017. Heidarpour, A. & Zhao, X-L. (eds.). CRC Press, p. 625-630 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

2 Citations (Scopus)

MoTe2, A novel anode material for sodium ion battery

Panda, M. R., Anish, R. K., Bao, Q. & Mitra, S., 10 Apr 2018, DAE Solid State Physics Symposium 2017. Das, A., Singh, S. & Biswas, A. (eds.). American Institute of Physics, Vol. 1942. 140078

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

The influence of surface roughness on the fatigue performance of selective laser melted aluminium alloy A357

Rao, J. H., Zhang, K., Rometsch, P., Huang, A. & Wu, X., 2018, Proceedings of the 16th International Aluminum Alloys Conference (ICAA16) 2018. Canadian Institute of Mining, Metallurgy and Petroleum

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

2017

Corrosion inhibition of mild steel by Novel Rare Earth carboxylate compounds

Peng, Y., Hughes, T., Deacon, G., Hinton, B., Forsyth, M., Mardel, J. & Somers, A., 1 Jan 2017, EUROCORR 2017 - The Annual Congress of the European Federation of Corrosion, 20th International Corrosion Congress and Process Safety Congress 2017: Joint European Corrosion Congress 2017, EUROCORR 2017 and 20th International Corrosion Congress and Process Safety Congress 2017; Prague Congress CentrePrague; Czech Republic; 3 September 2017 through 7 September 2017. p. 143-143 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOtherpeer-review

Development of Al-Mg-Si-(Cu) alloys for automotive body panels and the related ageing behaviours

Zhong, H., Liao, B., Wu, X., Cao, L. & Rometsch, P. A., 2017, 9th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2016: Graz; Austria; 29 May 2016 through 3 June 2016. Sommitsch, C., Ionescu, M., Mishra, B., Kozeschnik, E. & Chandra, T. (eds.). Switzerland: Trans Tech Publications, p. 279-283 5 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Development of 〈1010〉 Texture During Tensile Test at Room Temperature

Zeng, Z., Bian, M., Xu, S., Davies, C. H. J., Birbilis, N. & Nie, J. F., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer, p. 521-524 4 p. (Minerals, Metals and Materials Series; vol. Part F8).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

18 Citations (Scopus)

Direct laser deposition cladding of AlxCoCrFeNi high entropy alloys on a high-temperature stainless steel

Chao, Q., Guo, T., Jarvis, T., Wu, X., Hodgson, P. & Fabijanic, D., 25 Dec 2017, Surface and Coatings Technology: The 44th International Conference on Metallurgical Coatings and Thin Films (ICMCTF). Aouadi, S., Broitman, E., Figueroa, C. A., Greczynski, G., Muratore, C. & Stüber, M. (eds.). Lausanne Switzerland: Elsevier, Vol. 332. p. 440-451 12 p. (Surface and Coatings Technology; vol. 332). (Surface and Coatings Technology).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Open Access
File
2 Citations (Scopus)

Influence of coiling on microstructural evolution and mechanical properties of strip-cast low-carbon low-niobium steel

Jiang, L., Dorin, T., Marceau, R., Stanford, N. & Hodgson, P., 2017, THERMEC 2016. Sommitsch, C., Ionescu, M., Mishra, B., Kozeschnik, E. & Chandra, T. (eds.). Pfaffikon Switzerland: Trans Tech Publications, p. 1182-1187 6 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Influence of flash treatment on pseudoelastic behaviour of biomedical Ti-25Nb-3Zr-3Mo-2Sn alloy

Zhu, S., Zhu, Y., Dargusch, M. & Nie, J-F., 2017, THERMEC 2016. Sommitsch, C., Ionescu, M., Mishra, B., Kozeschnik, E. & Chandra, T. (eds.). Pfaffikon Switzerland: Trans Tech Publications, p. 1375-1380 6 p. (Materials Science Forum; vol. 879).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Microstructure evolution and strengthening mechanisms of aluminium alloy A357 manufactured by Selective Laser Melting

Rao, H., Wu, X. & Davies, C. H. J., 2017, 17th Australian International Aerospace Congress : AIAC 2017: Melbourne, Australia, 26-28 February, 2017. Barton, ACT: Engineers Australia, p. 110-115 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearch

3 Citations (Scopus)

Performance evaluation of high-pressure die-cast magnesium alloys

Easton, M., Zhu, S., Gibson, M., Abbott, T., Ang, H. Q., Chen, X., Birbilis, N. & Savage, G., 1 Jan 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer, p. 123-129 7 p. (Minerals, Metals and Materials Series; vol. Part F8).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Phase stability and formation in Mg–Gd–Zn alloys—key data for ICME of Mg alloys

Schmid-Fetzer, R., Gröbner, J., Zhu, S., Nie, J. F. & Gibson, M. A., 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer, p. 365-371 7 p. (Minerals, Metals and Materials Series; vol. Part F8).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

16 Citations (Scopus)

Strength, corrosion resistance, and biocompatibility of ultrafine-grained Mg alloys after different modes of severe plastic deformation

Dobatkin, S. V., Lukyanova, E. A., Martynenko, N. S., Anisimova, N. Y., Kiselevskiy, M. V., Gorshenkov, M. V., Yurchenko, N. Y., Raab, G. I., Yusupov, V. S., Birbilis, N., Salishchev, G. A. & Estrin, Y. Z., 8 May 2017, IOP Conference Series: Materials Science and Engineering. Liao, X. Y. & Estrin, Y. (eds.). 1 ed. Bristol UK: IOP Publishing, Vol. 194. 8 p. 012004. (IOP Conference Series: Materials Science and Engineering; vol. 194, no. 1). (IOP Conference Series: Materials Science and Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Open Access
File
1 Citation (Scopus)

The effect of Cu-based core-sheath configurations on the processing of Nd-Fe-B-based permanent magnets via equal-channel angular pressing

Besley, L., Zhang, H., Molotnikov, A., Kishimoto, H., Kato, T. A., Davies, C. & Suzuki, K., 8 May 2017, IOP Conference Series: Materials Science and Engineering: 7th International Conference on Nanomaterials by Severe Plastic Deformation, 2–7 July 2017, Sydney, Australia. Estrin, Y. & Liao, X. (eds.). Vol. 194. 6 p. 012043. (IOP Conference Series: Materials Science and Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Open Access
File
1 Citation (Scopus)

Zn segregation at precipitate/matrix interface in Mg–Sn–Zn alloys

Liu, C., Chen, H. & Nie, J. F., 1 Jan 2017, Magnesium Technology 2017. Neelameggham, N. R., Singh, A., Solanki, K. N. & Orlov, D. (eds.). Springer, p. 53-59 7 p. (Minerals, Metals and Materials Series; vol. Part F8).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

2016

A first-principles study of electronic properties of H and F-Terminated zigzag BNC nanoribbons

Alaal, N., Medhekar, N. & Shukla, A., 6 May 2016, Proceeding of International Conference on Condensed Matter and Applied Physics (ICC 2015): 30-31 October 2015, Bikaner, India. Shekhawat, M. S., Bhardwaj, S. & Suthar, B. (eds.). American Institute of Physics, Vol. 1728. 4 p. 020576

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearch

1 Citation (Scopus)

Aligned carbon nanotube webs in aerospace carbon fibre reinforced polymer composites for anti-icing/de-icing

Yao, X., Falzon, B. G. & Hawkins, S. C., 2016, ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials: Munich, Germany; 26-30 June 2016. European Conference on Composite Materials, ECCM, p. 1-8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearch

Engineering Steels at the Nanoscale for Improved Performance

Hodgson, P. D., Timokhina, I. B., Beladi, H., Dorin, T., Stanford, N. & Cai, M., 2016, AISTech 2016 - Proceedings of the Iron and Steel Technology Conference: 16-19 May 2016; Pittsburgh, PA, U.S.A. Ashburn, R. E. (ed.). Warrendale PA USA: Association for Iron and Steel Technology, Vol. 1. 10 p. PR370001

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Evaluating post-fire mechanical behavior of ultra-high strength (grade1200) steel tubes

Azhari, F., Heidarpour Esfarjani, A., Zhao, X. L. & Hutchinson, C., 2016, Structures in Fire, Proceedings of the Ninth International Conference [(SiF 2016): June 8 to June 10, Princeton University, USA. Garlock, M. E. M. & Kodur, V. K. R. (eds.). Lancaster, Pennsylvania, USA: DEStech Publications, Inc, p. 377-384 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)

Hot tearing in magnesium-rare earth alloys

Easton, M., Gavras, S., Gibson, M., Zhu, S., Nie, J. F. & Abbott, T., 2016, TMS 2016: Proceedings of the Magnesium Technology Symposium held at the 145th TMS Annual Meeting & Exhibition: Nashville, Tennessee; February 14-18, 2016. Singh, A., Solanki, K., Manuel, M. V. & Neelameggham, N. R. (eds.). Hoboken NJ USA: John Wiley & Sons, p. 123-128 6 p. (Magnesium Technology; vol. 2016).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)

Influence of the nanotube oxidation on the rheological and electrical properties of CNT/HDPE composites

Nobile, M. R., Somma, E., Valentino, O., Simon, G. & Neitzert, H. C., 18 May 2016, VIII International Conference on Times of Polymers (TOP) and Composites: From Aerospace to Nanotechnology: Ischia, Naples, Italy; 19 - 23 June 2016. D’Amore, A., Acierno, D. & Grassia, L. (eds.). AIP Publishing, 4 p. 4949725. (AIP Conference Proceedings; vol. 1736).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

3 Citations (Scopus)

Laser fabricated ultrathin flat lens in sub-nanometer thick monolayer transition metal dichalcogenides crystal

Lin, H., Xu, Z., Bao, Q. & Jia, B., 16 Dec 2016, Conference on Lasers and Electro-Optics (CLEO 2016): 5-10 June, 2016, San Jose, California, USA. IEEE, Institute of Electrical and Electronics Engineers, p. 2373-2374 2 p. 7788465

Research output: Chapter in Book/Report/Conference proceedingConference PaperOtherpeer-review

1 Citation (Scopus)

Phase field simulation of orowan strengthening by coherent precipitate plates in a Mg-Nd alloy

Liu, H., Wang, Y. & Nie, J. F., 2016, Proceedings of the 3rd World Congress on Integrated Computational Materials Engineering, ICME 2015: Colorado Springs, USA; 31 May 2015 through 4 June 2015. Poole, W., Christensen, S., Kalidindi, S., Luo, A., Madison, J., Raabe, D. & Sun, X. (eds.). Switzerland: Springer, p. 63-71 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2015
1 Citation (Scopus)

Achievements in magnesium alloy research

Easton, M. A., Gibson, M. A., Zhu, S-M., Yang, K. & Abbott, T. B., 2015, Materials Science Forum: Light Metals Technology 2015. Chikwanda, H. K. & Chikosha, S. (eds.). Pfaffikon Switzerland: Trans Tech Publications, Vol. 828-829. p. 3 - 8 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Drug delivery in bioresorbable orthopaedic magnesium implants

Lyndon, J. A., Birbilis, N. & Boyd, B. J., 2015, Australasian Corrosion Association Annual Conference: Corrosion and Prevention 2015, ACA 2015: Adelaide, Australia; 15-18 November 2015. Kerrimuir VIC Australia: Australasian Corrosion Association, 5 p. 110

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Efficiency enhancement in Cu2ZnSnS4 solar cells with silica nanoparticles embedded in absorber layer

Ananthoju, B., Mopurisetty, S. M., Tyagi, H., Bahadur, D., Medhekar, N. V., Ganguly, S. & Aslam, M., 14 Dec 2015, 2015 IEEE 42nd Photovoltaic Specialists Conference, PVSC 2015: New Orleans, Louisiana, USA; 14-19 June 2015. Piscataway NJ USA: IEEE, Institute of Electrical and Electronics Engineers, p. 907-911 5 p. 7355798

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Fabrication and characterization of solar supercapcitors integrated with a laser scribed graphene oxide film

Thekkekara, L. V., Jia, B., Zhang, Y., Qiu, L., Li, D. & Gu, M., 2015, Proceedings of Frontiers in Optics 2015, FIO 2015: San Jose, California United States; 18–22 October 2015. Washington DC USA: Optical Society of America (OSA), 2 p. FTu3C.3

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

High performance photodetectors based on two-dimensional materials

Li, S., Wang, Y., Qiao, H., Yuan, J. & Bao, Q., 10 Nov 2015, 2015 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications, (IMWS-AMP 2015) - Proceedings: Suzhou, China; 1-3 July 2015. Piscataway NJ USA: IEEE, Institute of Electrical and Electronics Engineers, p. 217-219 3 p. 7324970

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

On the effect of hydrogen on the corrosion and electrochemistry of AISI 410 and F22 steels

Thomas, S., 2015, Australasian Corrosion Association Annual Conference: Corrosion and Prevention 2015, ACA 2015: Adelaide, Australia; 15-18 November 2015. Kerrimuir VIC Australia: Australasian Corrosion Association, 7 p. 135

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)

Orientational ordering of nematic liquid crystal aligned with a directly spinnable carbon nanotube

Lee, H., Lee, J-H., Huynh, C. P., Hawkins, S. C., Musameh, M. & Chof, J., 1 Jun 2015, 53rd Annual SID International Symposium: San Jose, California; 21 May - 5 June 2015. Hoboken NJ USA: John Wiley & Sons, p. 1504-1506 3 p. P-92. (SID International Symposium. Digest of Technical Papers; vol. 46, no. 3). (Digest of Technical Papers - SID International Symposium).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Trace Metal Mobility during Carbon Mineralisation

Hamilton, J. L., Wilson, S. A., Morgan, B., Turvey, C. C., Jowitt, S. M. & Southam, G., 2015, 5th International Conference on Accelerated Carbonation for Environmental and Material Engineering 2015. New York USA: AIChE, p. 329-331 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Viscoelastic properties of vis-breaking polypropylenes

Nobile, M. R., Moad, G., Habsuda, J., Li, G., Nichols, L., Dagley, I. J. & Simon, G. P., 17 Dec 2015, Polymer Processing with Resulting Morphology and Properties: Feet in the Present and Eyes at the Future: Proceedings of the GT70 International Conference: 15–17 October 2015, Salerno, Italy. Pantani, R., De Santis, F. & Speranza, V. (eds.). American Institute of Physics, Vol. 1695. 5 p. 020057

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2014
2 Citations (Scopus)

An application of bi-directional evolutionary structural optimisation for optimising energy absorbing structures using a material damage model

Stojanov, D., Falzon, B. G., Wu, X. & Yan, W., 2014, Advances in Computational Mechanics. Steven, G., Li, Q. & Zhang, Z. L. (eds.). Pfaffikon Switzerland: Trans Tech Publications, p. 836-841 6 p. (Applied Mechanics and Materials; vol. 553).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)

Direct patterning of C-shape arrays on graphene oxide thin films using direct laser printing

Zheng, X., Cao, Z., Jia, B., Qiu, L., Li, D. & Gu, M., 14 Oct 2014, Frontiers in Optics, FiO 2014: Tucson, Arizona, USA; 19–23 October 2014. Washington DC USA: Optical Society of America (OSA), 2 p. FW2B.2

Research output: Chapter in Book/Report/Conference proceedingConference PaperOtherpeer-review

Dynamic interactions between precipitation and plastic deformation in aluminium alloys

Deschamps, A., De Geuser, F., Hutchinson, C., Lee, S. & Horita, Z., 2014, Materials Science Forum: Aluminium Alloys 2014 - ICAA14. Marthisen, K., Holmedal, B. & Li, Y. (eds.). Stafa-Zurich Switzerland: Trans Tech Publications, Vol. 794-796. p. 1133 - 1140 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

4 Citations (Scopus)

Effect of back pressure on the thermal stability of severely deformed copper

Wang, Y., Lapovok, R. Y., Wang, J. T. & Estrin, Y., 2014, IOP Conference Series: Materials Science and Engineering. Toth, L. S., Beausir, B., Bouaziz, O., Bouzy, E. & Grosdidier, T. (eds.). Bristol UK: IOP Publishing, Vol. 63. p. 1 - 10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2 Citations (Scopus)

Effect of rolling on microstructure and room temperature tensile properties of newly developed Mg-4Li-1Ca alloy

Nene, S. S., Kashyap, B. P., Prabhu, N., Al-Samman, T. & Estrin, Y., 2014, Advanced Materials Research: THERMEC 2013 Supplement. Mishra, B., Ionescu, M. & Chandra, T. (eds.). Pfaffikon Switzerland: Trans Tech Publications, Vol. 922. p. 537 - 542 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)

Effects of waveform and cycle period on corrosion-fatigue crack growth in cathodically protected high-strength steels

Knop, M., Birbilis, N. & Lynch, S. P., 2014, Advanced Materials Research: 11th International Fatigue Congress (FATIGUE 2014). Clark, G. & Wang, C. H. (eds.). Pfaffikon Switzerland: Trans Tech Publications, Vol. 891-982. p. 211 - 216 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)

Enhancing corrosion resistance by a hydrophobic surface feature for magnesium alloy AZ91D

Chen, X-B., Ke, C. & Birbilis, N., 2014, Magnesium Technology 2014 - 143rd Annual Meeting and Exhibition (TMS2014). Alderman, M., Manuel, M. V., Hort, N. & Neelameggham, N. R. (eds.). Hoboken NJ USA: John Wiley & Sons, p. 319 - 323 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1 Citation (Scopus)

Equal channel angular pressing at temperatures of 77-575 K of Titanium Grade 2: Microstructure and mechanical properties

Podolskiy, A. V., Ng, H-P., Psaruk, I. A., Tabachnikova, E. D. & Lapovok, R. Y., 2014, IOP Conference Series: Materials Science and Engineering. Toth, L. S., Beausir, B., Bouaziz, O., Bouzy, E. & Grosdidier, T. (eds.). Bristol UK: Institute of Physics Publishing Ltd, Vol. 63. p. 1 - 13 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Femtosecond laser fabricated ultra-flat lens in a graphene oxide thin film

Zheng, X., Jia, B., Lin, H., Qiu, L., Li, D. & Gu, M., 14 Oct 2014, Frontiers in Optics, FiO 2014: Tucson, Arizona, USA; 19–23 October 2014. Washington DC USA: Optical Society of America (OSA), 2 p. FTh2C.4

Research output: Chapter in Book/Report/Conference proceedingConference PaperOtherpeer-review

3 Citations (Scopus)

Friction effects during open-die micro-forging/extrusion processes: An upper bound approach

Ghassemali, E., Tan, M-J., Wah, C. B., Lim, S. C. V. & Jarfors, A. E. W., 2014, 11th International Conference on Technology of Plasticity, ICTP 2014: 19-24 October 2014; Nagoya, Japan. Ishikawa, T. & Mori, K. (eds.). Elsevier, p. 1915-1920 6 p. (Procedia Engineering; vol. 81).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Open Access
File

Localization of excitons in thin core-multi-shell quantum well tubes

Shi, T., Jackson, H. E., Smith, L. M., Yarrison-Rice, J. M., Wong, B. M., Etheridge, J., Jiang, N. J., Gao, Q., Tan, H. H. & Jagadish, C., 2014, Materials Research Society Symposium Proceedings. Voss, T., Fontcuberta i Morral, A., Xiong, Q., Boecki, J. J. & Jagadish, C. (eds.). Warrendale PA USA: Materials Research Society, Vol. 1659. p. 135 - 138 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Long lifetime optical recording in gold-nanorod-dispersed organically modified ceramic nanocomposites

Zhang, Q., Xia, Z., Li, X., Cheng, Y-B. & Gu, M., 14 Oct 2014, Frontiers in Optics, FiO 2014: Tucson, Arizona, USA; 19–23 October 2014. Washington DC USA: Optical Society of America (OSA), 2 p. FW4A.4

Research output: Chapter in Book/Report/Conference proceedingConference PaperOtherpeer-review