Research Output 1998 2019

Filter
Conference Paper
2018

Classification of impact signals from insulated rail joints using spectral analysis

Yuen, A., Zheng, D., Mutton, P. & Yan, W., 1 Jan 2018, Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Cham Switzerland: Springer, p. 771-780 10 p. (Notes on Numerical Fluid Mechanics and Multidisciplinary Design; vol. 139).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Development of a non-contact laser speckle imaging system for strain measurements in rails

Pang, Y., Chen, B. K., Lingamanaik, S. N. & Yu, S. F., 2018, Proceedings CORE 2018 - Conference on Railway Excellence . Gerstmann, K. (ed.). Sydney Australia: The Railway Technical Society of Australasia (RTSA), 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Evaluation of the mechanical properties of laser cladded hypereutectoid steel rails

Roy, T., Abrahams, R., Paradowska, A., Lai, Q., Mutton, P., Soodi, M. & Yan, W., 1 Jan 2018, Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018. Nunez, A. & Li, Z. (eds.). TU Delft, p. 824-829 6 p. (Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Laser cladding for railway repair: Influence of depositing materials and heat treatment on microstructural characteristics

Lai, Q., Abrahams, R., Mutton, P., Qiu, C., Paradowska, A., Soodi, M., Roy, T. & Yan, W., 1 Jan 2018, ICRT 2017: Railway Development, Operations, and Maintenance - Proceedings of the First International Conference on Rail Transportation 2017. Zhai, W. & Wang, K. C. P. (eds.). Reston VA USA: American Society of Civil Engineers, p. 452-463 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Open Access
File

Numerical study on the ratcheting performance of heavy haul rails in curved tracks

Su, H., Pun, C. L., Mutton, P., Kan, Q. & Yan, W., 1 Jan 2018, Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018. Nunez, A. & Li, Z. (eds.). TU Delft, p. 938-947 10 p. (Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Ratcheting performance of flashbutt welds in premium Rail steels

Pun, C. L., Mutton, P., Welsby, D. & Yan, W., 1 Jan 2018, Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018. Nunez, A. & Li, Z. (eds.). TU Delft, p. 792-802 11 p. (Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Small scale unmanned aerial system (UAS) for railway culvert and tunnel inspection

Vong, C. H., Ravitharan, R., Reichl, P., Chevin, J. & Chung, H., 1 Jan 2018, ICRT 2017: Railway Development, Operations, and Maintenance - Proceedings of the 1st International Conference on Rail Transportation 2017. Ultrasound International, Vol. 2017-July. p. 1024-1032 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Tamping effectiveness prediction using supervised machine learning techniques

Tan, C. W., Webb, G. I., Petitjean, F. & Reichl, P., 2018, ICRT 2017 - Railway Development, Operations, and Maintenance: Proceedings of the First International Conference on Rail Transportation 2017 - July 10–12, 2017 Chengdu, Sichuan Province, China. Zhai, W. & Wang, K. C. P. (eds.). Reston Virginia USA: American Society of Civil Engineers, p. 1010-1023 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearch

Tribological behaviour of laser cladded rail under rolling contact test

Roy, T., Abrahams, R., Lai, Q., Mutton, P., Soodi, M., Paradowska, A. & Yan, W., 1 Jan 2018, ICRT 2017: Railway Development, Operations, and Maintenance - Proceedings of the First International Conference on Rail Transportation 2017. Zhai, W. & Wang, K. C. P. (eds.). Reston VA USA: American Society of Civil Engineers, p. 445-451 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2017

Defining Rail Track Input Conditions Using an Instrumented Revenue Vehicle

Chong, T. L., Awad, M. N., Nadarajah, N., Chiu, W. K., Lingamanaik, S. N., Hardie, G., Ravitharan, R. & Widyastuti, H., 2017, Proceedings of the 6th Asia Pacific Workshop on Structural Health Monitoring, 6th APWSHM): 7th to 9th December 2016, Hobart, Tasmania, Australia. Chiu, W. K., Galea, S., Mita, A. & Takeda, N. (eds.). Elsevier, p. 479-485 7 p. (Procedia Engineering; vol. 188).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearch

Open Access
File

Effect of Cladding Direction on Residual Stress Distribution in Laser Cladded Rails

Roy, T., Paradowska, A., Abrahams, R., Lai, Q., Law, M., Mutton, P., Soodi, M. & Yan, W., 2017, International Journal of Civil and Environmental Engineering. Turkey: World Academy of Science, Engineering and Technology (WASET), Vol. 11. 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOtherpeer-review

Open Access
File

Finite element analysis of thermal cycle in laser cladding for railway repair

Lai, Q., Abrahams, R., Yan, W., Mutton, P., Qiu, C., Paradowska, A., Soodi, M. & Roy, T., 1 Jan 2017, 9th Australasian Congress on Applied Mechanics (ACAM 2017). Prusty, G. & Paradowska, A. (eds.). Sydney Australia: Engineers Australia, 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Rail Infrastructure in Port City - Surabaya, Indonesia

Ravitharan, R., LaBrooy, A., Widyastuti, H. & Chiu, W. K., 2017, Procedia Engineering : Structural Health Monitoring - From Sensing to Diagnosis and Prognosis. Chiu, W. K., Galea, S., Mita, A. & Takeda, B. (eds.). Amsterdam Netherlands: Elsevier, Vol. 188. p. 486-492 7 p. (Procedia Engineering; vol. 188).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Open Access
File

Residual stress measurement in laser cladded rail utilizing neutron diffraction technique

Roy, T., Paradowska, A., Lai, Q., Abrahams, R., Law, M., Mutton, P., Soodi, M. & Yan, W., 1 Jan 2017, 9th Australasian Congress on Applied Mechanics (ACAM 2017). Prusty, G. & Paradowska, A. (eds.). Sydney Australia: Engineers Australia, 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Scattering of the Fundamental Anti-symmetric Lamb Wave by a Mid-plane Edge Delamination in a Fiber-composite Laminate

Chiu, W. K., Rose, L. R. F. & Nadarajah, N., 2017, Procedia Engineering. Vol. 188. p. 317-324 8 p. (Procedia Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Using Instrumented Revenue Vehicles to Inspect Track Integrity and Rolling Stock Performance in a Passenger Network during Peak Times

Naidoo Lingamanaik, S., Thompson, C., Nadarajah, N., Ravitharan, R., Widyastuti, H. & Chiu, W. K., 2017, 6th Asia Pacific Workshop on Structural Health Monitoring, 6th APWSHM: 7th to 9th December 2016, Hobart, Tasmania, Australia. Chiu, W. K., Galea, S., Mita, A. & Takeda, N. (eds.). Elsevier, p. 424-431 8 p. (Procedia Engineering; vol. 188).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearch

Open Access
File
2016

Processing high-volume geospatial data: A case of monitoring heavy haul railway operations

Sangat, P., Indrawan-Santiago, M., Taniar, D., Oh, B. & Reichl, P., 2016, Procedia Computer Science: International Conference on Computational Science (ICCS 2016). Altintas, I., Norman, M., Dongarra, J., Krzhizhanovskaya, V. V., Lees, M. & Sloot, P. M. A. (eds.). Amsterdam, Netherlands: Elsevier, Vol. 80. p. 2221-2225 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Open Access
File
2015

Microstructural characterization of high strength rail steels

Pun, C. L., Sho, K. C., Mutton, P. & Yan, W., 2015, 10th International Conference on Contact Mechanics of Wheel/Rail Systems (CM 2015): Colorado Springs, United States, 30 August 2015 - 3 September 2015 [proceedings]. International Conference on Contact Mechanics of Wheel / Rail Systems

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Prediction of rolling contact fatigue life based on ratcheting analysis

Pun, C. L., Kan, Q., Mutton, P., Kang, G. & Yan, W., 2015, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems (CM 2015): Colorado Springs, United States, 30 August 2015 - 3 September 2015 [proceedings]. International Conference on Contact Mechanics of Wheel / Rail Systems, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearch

2013

Energy Harvesting from Heavy Haul Railcar Vibrations

Ung, C., Moss, S., Vandewater, L. A., Galea, S. C., Chiu, W. K. & Crew, G., 2013, Proceedings of the 2013 IEEE Eighth International Conference on Intelligent Sensors, Sensor Networks and Information Processing. Palaniswami, M., Leckie, C., Kanhere, S. & Gubbi, J. (eds.). Piscataway NJ USA: IEEE, Institute of Electrical and Electronics Engineers, p. 95 - 98 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Ratchetting behaviour of high strength rail steel under uniaxial and biaxial cyclic loadings

Pun, C. L. J., Kan, Q., Mutton, P. J., Kang, G. & Yan, W., 2013, Proceedings of the 13th International Conference on Fracture. Yu, S. & Feng, X-Q. (eds.). Beijing PR China: China Science Literature Publishing House, p. 1 - 10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2012

Slipping in rail/wheel rolling contact

Pun, C. L., Yan, W. & Mutton, P., 2012, 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2012: Chengdu, China; 27-30 August 2012. China: Southwest Jiaotong University Press, p. 231-232 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Stress analysis in rail head of high strength rail steel in heavy haul operations

Pun, C. L., Yan, W. & Mutton, P. J., 2012, 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2012: Chengdu, China; 27-30 August 2012. China: Southwest Jiaotong University Press, p. 516-522 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearch

2011

Fatigue behaviour of flashbutt welds in high strength, eutectoid and hypereutectoid rail steels under high axle loads

Mutton, P., Cookson, J. & Chiu, W., 2011, Proceedings of the 2011 International Heavy Haul Association Conference. Roney, M. & Lowenger, M. (eds.). Calgary Canada: International Heavy Haul Association, p. 1 - 8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2005

Wayside Monitoring to Drive Vehicle Maintenance

Bowey, N., Bartle, P., Donnelly, R., Stevens, A. G. & Lynch, M., 2005, Proceedings - Eighth International Heavy Haul Conference. Jorge, C. G. (ed.). USA: International Heavy Haul Association, p. 511 - 518 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review