Research Output 1998 2019

2019

Evaluation of the mechanical properties of laser cladded hypereutectoid steel rails

Roy, T., Abrahams, R., Paradowska, A., Lai, Q., Mutton, P., Soodi, M., Fasihi, P. & Yan, W., 15 Aug 2019, In : Wear. 432-433, 12 p., 202930.

Research output: Contribution to journalArticleResearchpeer-review

Influences of depositing materials, processing parameters and heating conditions on material characteristics of laser-cladded hypereutectoid rails

Lai, Q., Abrahams, R., Yan, W., Qiu, C., Mutton, P., Paradowska, A., Soodi, M. & Wu, X., 1 Jan 2019, In : Journal of Materials Processing Technology. 263, p. 1-20 20 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
2018

Classification of impact signals from insulated rail joints using spectral analysis

Yuen, A., Zheng, D., Mutton, P. & Yan, W., 1 Jan 2018, Notes on Numerical Fluid Mechanics and Multidisciplinary Design. Cham Switzerland: Springer, p. 771-780 10 p. (Notes on Numerical Fluid Mechanics and Multidisciplinary Design; vol. 139).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Development of a non-contact laser speckle imaging system for strain measurements in rails

Pang, Y., Chen, B. K., Lingamanaik, S. N. & Yu, S. F., 2018, Proceedings CORE 2018 - Conference on Railway Excellence . Gerstmann, K. (ed.). Sydney Australia: The Railway Technical Society of Australasia (RTSA), 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Effect of deposition material and heat treatment on wear and rolling contact fatigue of laser cladded rails

Roy, T., Lai, Q., Abrahams, R., Mutton, P., Paradowska, A., Soodi, M. & Yan, W., 15 Oct 2018, In : Wear. 412-413, p. 69-81 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Effects of preheating and carbon dilution on material characteristics of laser-cladded hypereutectoid rail steels

Lai, Q., Abrahams, R., Yan, W., Qiu, C., Mutton, P., Paradowska, A., Fang, X., Soodi, M. & Wu, X., 17 Jan 2018, In : Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing. 712, p. 548-563 16 p.

Research output: Contribution to journalArticleResearchpeer-review

Evaluation of the mechanical properties of laser cladded hypereutectoid steel rails

Roy, T., Abrahams, R., Paradowska, A., Lai, Q., Mutton, P., Soodi, M. & Yan, W., 1 Jan 2018, Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018. Nunez, A. & Li, Z. (eds.). TU Delft, p. 824-829 6 p. (Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Laser cladding for railway repair: Influence of depositing materials and heat treatment on microstructural characteristics

Lai, Q., Abrahams, R., Mutton, P., Qiu, C., Paradowska, A., Soodi, M., Roy, T. & Yan, W., 1 Jan 2018, ICRT 2017: Railway Development, Operations, and Maintenance - Proceedings of the First International Conference on Rail Transportation 2017. Zhai, W. & Wang, K. C. P. (eds.). Reston VA USA: American Society of Civil Engineers, p. 452-463 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Open Access
File

Numerical study on the ratcheting performance of heavy haul rails in curved tracks

Su, H., Pun, C. L., Mutton, P., Kan, Q. & Yan, W., 1 Jan 2018, Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018. Nunez, A. & Li, Z. (eds.). TU Delft, p. 938-947 10 p. (Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Prediction of railway vehicles’ dynamic behavior with machine learning algorithms

Nadarajah, N., Shamdani, A., Hardie, G., Chiu, W. K. & Widyastuti, H., 1 Jan 2018, In : Electronic Journal of Structural Engineering. 18, 1, p. 38-46 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File

Ratcheting performance of flashbutt welds in premium Rail steels

Pun, C. L., Mutton, P., Welsby, D. & Yan, W., 1 Jan 2018, Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018. Nunez, A. & Li, Z. (eds.). TU Delft, p. 792-802 11 p. (Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Small scale unmanned aerial system (UAS) for railway culvert and tunnel inspection

Vong, C. H., Ravitharan, R., Reichl, P., Chevin, J. & Chung, H., 1 Jan 2018, ICRT 2017: Railway Development, Operations, and Maintenance - Proceedings of the 1st International Conference on Rail Transportation 2017. Ultrasound International, Vol. 2017-July. p. 1024-1032 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Tamping effectiveness prediction using supervised machine learning techniques

Tan, C. W., Webb, G. I., Petitjean, F. & Reichl, P., 2018, ICRT 2017 - Railway Development, Operations, and Maintenance: Proceedings of the First International Conference on Rail Transportation 2017 - July 10–12, 2017 Chengdu, Sichuan Province, China. Zhai, W. & Wang, K. C. P. (eds.). Reston Virginia USA: American Society of Civil Engineers, p. 1010-1023 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearch

Tribological behaviour of laser cladded rail under rolling contact test

Roy, T., Abrahams, R., Lai, Q., Mutton, P., Soodi, M., Paradowska, A. & Yan, W., 1 Jan 2018, ICRT 2017: Railway Development, Operations, and Maintenance - Proceedings of the First International Conference on Rail Transportation 2017. Zhai, W. & Wang, K. C. P. (eds.). Reston VA USA: American Society of Civil Engineers, p. 445-451 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2017

Defining Rail Track Input Conditions Using an Instrumented Revenue Vehicle

Chong, T. L., Awad, M. N., Nadarajah, N., Chiu, W. K., Lingamanaik, S. N., Hardie, G., Ravitharan, R. & Widyastuti, H., 2017, Proceedings of the 6th Asia Pacific Workshop on Structural Health Monitoring, 6th APWSHM): 7th to 9th December 2016, Hobart, Tasmania, Australia. Chiu, W. K., Galea, S., Mita, A. & Takeda, N. (eds.). Elsevier, p. 479-485 7 p. (Procedia Engineering; vol. 188).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearch

Open Access
File

Effect of Cladding Direction on Residual Stress Distribution in Laser Cladded Rails

Roy, T., Paradowska, A., Abrahams, R., Lai, Q., Law, M., Mutton, P., Soodi, M. & Yan, W., 2017, International Journal of Civil and Environmental Engineering. Turkey: World Academy of Science, Engineering and Technology (WASET), Vol. 11. 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOtherpeer-review

Open Access
File

Finite element analysis of thermal cycle in laser cladding for railway repair

Lai, Q., Abrahams, R., Yan, W., Mutton, P., Qiu, C., Paradowska, A., Soodi, M. & Roy, T., 1 Jan 2017, 9th Australasian Congress on Applied Mechanics (ACAM 2017). Prusty, G. & Paradowska, A. (eds.). Sydney Australia: Engineers Australia, 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Investigation of a novel functionally graded material for the repair of premium hypereutectoid rails using laser cladding technology

Lai, Q., Abrahams, R., Yan, W., Qiu, C., Mutton, P., Paradowska, A. & Soodi, M., 1 Dec 2017, In : Composites Part B: Engineering. 130, p. 174-191 18 p.

Research output: Contribution to journalArticleResearchpeer-review

Rail Infrastructure in Port City - Surabaya, Indonesia

Ravitharan, R., LaBrooy, A., Widyastuti, H. & Chiu, W. K., 2017, Procedia Engineering : Structural Health Monitoring - From Sensing to Diagnosis and Prognosis. Chiu, W. K., Galea, S., Mita, A. & Takeda, B. (eds.). Amsterdam Netherlands: Elsevier, Vol. 188. p. 486-492 7 p. (Procedia Engineering; vol. 188).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Open Access
File

Residual stress measurement in laser cladded rail utilizing neutron diffraction technique

Roy, T., Paradowska, A., Lai, Q., Abrahams, R., Law, M., Mutton, P., Soodi, M. & Yan, W., 1 Jan 2017, 9th Australasian Congress on Applied Mechanics (ACAM 2017). Prusty, G. & Paradowska, A. (eds.). Sydney Australia: Engineers Australia, 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Scattering of the Fundamental Anti-symmetric Lamb Wave by a Mid-plane Edge Delamination in a Fiber-composite Laminate

Chiu, W. K., Rose, L. R. F. & Nadarajah, N., 2017, Procedia Engineering. Vol. 188. p. 317-324 8 p. (Procedia Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Using Instrumented Revenue Vehicles to Inspect Track Integrity and Rolling Stock Performance in a Passenger Network during Peak Times

Naidoo Lingamanaik, S., Thompson, C., Nadarajah, N., Ravitharan, R., Widyastuti, H. & Chiu, W. K., 2017, 6th Asia Pacific Workshop on Structural Health Monitoring, 6th APWSHM: 7th to 9th December 2016, Hobart, Tasmania, Australia. Chiu, W. K., Galea, S., Mita, A. & Takeda, N. (eds.). Elsevier, p. 424-431 8 p. (Procedia Engineering; vol. 188).

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearch

Open Access
File

Using reciprocity to derive the far field displacements due to buried sources and scatterers

Rose, L. R. F., Chiu, W. K., Nadarajah, N. & Vien, B. S., 1 Nov 2017, In : Journal of the Acoustical Society of America. 142, 5, p. 2979-2987 9 p.

Research output: Contribution to journalArticleResearchpeer-review

Open Access
File
2016

Microstructural characterisation of rolling contact fatigue damage in flashbutt welds

Mutton, P., Cookson, J., Qiu, C. & Welsby, D., 15 Nov 2016, In : Wear. 366-367, p. 368-377 10 p.

Research output: Contribution to journalArticleResearchpeer-review

Processing high-volume geospatial data: A case of monitoring heavy haul railway operations

Sangat, P., Indrawan-Santiago, M., Taniar, D., Oh, B. & Reichl, P., 2016, Procedia Computer Science: International Conference on Computational Science (ICCS 2016). Altintas, I., Norman, M., Dongarra, J., Krzhizhanovskaya, V. V., Lees, M. & Sloot, P. M. A. (eds.). Amsterdam, Netherlands: Elsevier, Vol. 80. p. 2221-2225 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Open Access
File

Rolling contact fatigue, wear and broken rail derailments

Magel, E., Mutton, P., Ekberg, A. & Kapoor, A., 15 Nov 2016, In : Wear. 366-367, p. 249-257 9 p.

Research output: Contribution to journalArticleResearchpeer-review

2015

An efficient computational approach to evaluate the ratcheting performance of rail steels under cyclic rolling contact in service

Pun, C. L., Kan, Q., Mutton, P. J., Kang, G. & Yan, W., 2015, In : International Journal of Mechanical Sciences. 101-102, p. 214 - 226 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Microstructural characterization of high strength rail steels

Pun, C. L., Sho, K. C., Mutton, P. & Yan, W., 2015, 10th International Conference on Contact Mechanics of Wheel/Rail Systems (CM 2015): Colorado Springs, United States, 30 August 2015 - 3 September 2015 [proceedings]. International Conference on Contact Mechanics of Wheel / Rail Systems

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Prediction of rolling contact fatigue life based on ratcheting analysis

Pun, C. L., Kan, Q., Mutton, P., Kang, G. & Yan, W., 2015, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems (CM 2015): Colorado Springs, United States, 30 August 2015 - 3 September 2015 [proceedings]. International Conference on Contact Mechanics of Wheel / Rail Systems, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearch

2013

Energy Harvesting from Heavy Haul Railcar Vibrations

Ung, C., Moss, S., Vandewater, L. A., Galea, S. C., Chiu, W. K. & Crew, G., 2013, Proceedings of the 2013 IEEE Eighth International Conference on Intelligent Sensors, Sensor Networks and Information Processing. Palaniswami, M., Leckie, C., Kanhere, S. & Gubbi, J. (eds.). Piscataway NJ USA: IEEE, Institute of Electrical and Electronics Engineers, p. 95 - 98 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

Ratchetting behaviour of high strength rail steel under uniaxial and biaxial cyclic loadings

Pun, C. L. J., Kan, Q., Mutton, P. J., Kang, G. & Yan, W., 2013, Proceedings of the 13th International Conference on Fracture. Yu, S. & Feng, X-Q. (eds.). Beijing PR China: China Science Literature Publishing House, p. 1 - 10 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2012

Finite element modelling of the rail gauge corner and underhead radius stresses under heavy axle load conditions

Ranjha, S. A., Ding, K., Mutton, P. J. & Kapoor, A., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. 226, F3, p. 318 - 330 13 p.

Research output: Contribution to journalArticleResearchpeer-review

Slipping in rail/wheel rolling contact

Pun, C. L., Yan, W. & Mutton, P., 2012, 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2012: Chengdu, China; 27-30 August 2012. China: Southwest Jiaotong University Press, p. 231-232 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperOther

Stress analysis in rail head of high strength rail steel in heavy haul operations

Pun, C. L., Yan, W. & Mutton, P. J., 2012, 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2012: Chengdu, China; 27-30 August 2012. China: Southwest Jiaotong University Press, p. 516-522 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearch

The effect of geometric features on multi-axial fatigue behaviour of aluminothermic rail welds

Salehi, I., Mutton, P. J. & Kapoor, A., 2012, In : Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. 226, F4, p. 360 - 370 11 p.

Research output: Contribution to journalArticleResearchpeer-review

2011

Fatigue behaviour of flashbutt welds in high strength, eutectoid and hypereutectoid rail steels under high axle loads

Mutton, P., Cookson, J. & Chiu, W., 2011, Proceedings of the 2011 International Heavy Haul Association Conference. Roney, M. & Lowenger, M. (eds.). Calgary Canada: International Heavy Haul Association, p. 1 - 8 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

2008

Modelling of quenching process and residual stresses in rail wheels

Lingamanaik, S. N., Chen, B. K., Kha, H. & Constable, T., 1 Dec 2008, In : Materials Forum. 34, p. 124-130 7 p.

Research output: Contribution to journalConference articleResearchpeer-review

Modifying residual stress levels in rail flash-butt welds using localised rapid post-weld heat treatment and accelerated cooling

Tawfik, D., Mutton, P. J. & Chiu, W. K., 1 Dec 2008, In : International Heat Treatment and Surface Engineering. 2, 3-4, p. 126-130 5 p.

Research output: Contribution to journalArticleResearchpeer-review

2007

A comparative study between FEA, trepanning and neutron strain diffraction on residual stresses in flash-butt welded rails

Tawfik, D., Mutton, P. J., Kirstein, O. & Chiu, W. K., 1 Jan 2007, In : Journal of Neutron Research. 15, 3-4, p. 199-205 7 p.

Research output: Contribution to journalArticleResearchpeer-review

Modifying residual stress levels in rail flash-butt welds using localised, rapid post-weld heat treatment and accelerated cooling

Tawfik, D., Mutton, P. J. & Chiu, W. K., 1 Jan 2007.

Research output: Contribution to conferencePaperOtherpeer-review

2005

Wayside Monitoring to Drive Vehicle Maintenance

Bowey, N., Bartle, P., Donnelly, R., Stevens, A. G. & Lynch, M., 2005, Proceedings - Eighth International Heavy Haul Conference. Jorge, C. G. (ed.). USA: International Heavy Haul Association, p. 511 - 518 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference PaperResearchpeer-review

1998

Smooth particle hydrodynamics simulation of surface coating

Reichl, P. J., Morris, P., Hourigan, K., Thompson, M. C. & Stoneman, S. A. T., 1 Dec 1998, In : Applied Mathematical Modelling. 22, 12, p. 1037-1046 10 p.

Research output: Contribution to journalArticleResearchpeer-review