Centre for Additive Manufacturing (MCAM)

(Manager)

Office of the Vice-Provost (R & R Infra)

Facility/equipment: Facility

Location
13 Normanby Road Nottinghill Victoria 3168
Australia

Description

The Monash Centre for Additive Manufacturing takes fundamental research from a broad range of disciplines and applies them to manufacturing challenges. These disciplines include materials science, alloy design and processing, mechanical and aerospace engineering, structure design and simulation, surface engineering, corrosion and hybrid materials. We work with our partners to invent bespoke solutions to unique manufacturing challenges. Using networks within the Clayton precinct and beyond, we draw on a number of different cutting-edge capabilities and expertise, we then apply them in novel and innovative ways to provide new opportunities for manufacturers.

Contact information

Phone	+61 (3) 9905 5247
Emails	Xinhua.wu@monash.edu
Links	Unspecified, Unspecified, Website

Terms of loan/booking

Available for loan - internal only

Related content

Research Output

Multiple precipitation pathways in an Al-7Si-0.6Mg alloy fabricated by selective laser melting

Research output: Contribution to journal › Article › Research › peer-review

Microstructural characterization of binary microstructure pattern in selective laser-melted Ti-6Al-4V

Research output: Contribution to journal › Article › Research › peer-review

The influence of processing parameters on aluminium alloy A357 manufactured by selective laser melting

Research output: Contribution to journal › Article › Research › peer-review

The origins for tensile properties of selective laser melted aluminium alloy A357

Research output: Contribution to journal › Article › Research › peer-review

Mechanical properties and in vitro behavior of additively manufactured and functionally graded Ti6Al4V porous scaffolds

Research output: Contribution to journal › Article › Research › peer-review

Characterisation of AlScZr and AlErZr alloys processed by rapid laser melting

Research output: Contribution to journal › Article › Research › peer-review

Numerical modelling and experimental validation in Selective Laser Melting

Research output: Contribution to journal › Article › Research › peer-review

Static coarsening behaviour of lamellar microstructure in selective laser melted Ti–6Al–4V

Research output: Contribution to journal › Article › Research › peer-review

Microstructure evolution and strengthening mechanisms of aluminium alloy A357 manufactured by Selective Laser Melting

Research output: Chapter in Book/Report/Conference proceeding › Conference Paper › Research

Influences of processing parameters on surface roughness of Hastelloy X produced by selective laser melting

Research output: Contribution to journal › Article › Research › peer-review

Selective laser melting of a high strength Al-Mn-Sc alloy: alloy design and strengthening mechanisms

Research output: Contribution to journal › Article › Research › peer-review

Selective laser melted Al-7Si-0.6Mg alloy with in-situ precipitation via platform heating for residual strain removal

Research output: Contribution to journal › Article › Research › peer-review

Effects of microtexture and Ti₃Al (α₂) precipitates on stress-corrosion cracking properties of a Ti-8Al-1Mo-1V alloy

Research output: Contribution to journal › Article › Research › peer-review

Effect of microtexture on short crack propagation in two-phase titanium alloys

Research output: Contribution to journal › Article › Research › peer-review

Characterisation of a novel Sc and Zr modified Al–Mg alloy fabricated by selective laser melting

Research output: Contribution to journal › Article › Research › peer-review

Effect of platform temperature on the porosity, microstructure and mechanical properties of an Al–Mg–Sc–Zr alloy fabricated by selective laser melting

Research output: Contribution to journal › Article › Research › peer-review

Numerical analysis of multi-layered laser cladding for die repair applications to determine residual stresses and hardness

Research output: Contribution to journal › Conference article › Other

Role of martensite decomposition in tensile properties of selective laser melted Ti-6Al-4V

Research output: Contribution to journal › Article › Research › peer-review

Towards a high strength aluminium alloy development methodology for selective laser melting

Research output: Contribution to journal › Article › Research › peer-review

Defect, microstructure, and mechanical property of Ti-6Al-4V alloy fabricated by high-power selective laser melting

Research output: Contribution to journal › Article › Research › peer-review

Effect of heat treatment on the microstructure and anisotropy in mechanical properties of A357 alloy produced by selective laser melting

Research output: Contribution to journal › Article › Research › peer-review

Columnar to equiaxed transition in Al-Mg(-Sc)-Zr alloys produced by selective laser melting

Research output: Contribution to journal › Article › Research › peer-review

Porosity formation mechanisms and fatigue response in Al-Si-Mg alloys made by selective laser melting

Research output: Contribution to journal › Article › Research › peer-review

Investigation of the structure and mechanical properties of additively manufactured Ti-6Al-4V biomedical scaffolds designed with a Schwartz primitive unit-cell

Research output: Contribution to journal › Article › Research › peer-review

Influence of post heat treatments on anisotropy of mechanical behaviour and microstructure of Hastelloy-X parts produced by selective laser melting

Research output: Contribution to journal › Article › Research › peer-review

Surface roughness of Selective Laser Melted Ti-6Al-4V alloy components

Research output: Contribution to journal › Article › Research › peer-review

The effects of selective laser melting process parameters on relative density of the AlSi10Mg parts and suitable procedures of the archimedes method

Research output: Contribution to journal › Article › Research › peer-review

On the corrosion and metastable pitting characteristics of 316L stainless steel produced by selective laser melting

Research output: Contribution to journal › Article › Research › peer-review

Continuous morphological transition and its mechanism of Al₃Ni Phase at the liquid–solid interface during solidification

Research output: Contribution to journal › Article › Research › peer-review

The mechanism of aqueous stress-corrosion cracking of α + β titanium alloys

Research output: Contribution to journal › Article › Research › peer-review

The processing and heat treatment of selective laser melted Al-7Si-0.6 Mg alloy

Research output: Chapter in Book/Report/Conference proceeding › Chapter (Book) › Research › peer-review

Optimisation of selective laser melting parameters for the Ni-based superalloy IN-738 LC using Doehlert's design

Research output: Contribution to journal › Article › Research › peer-review

High-temperature mechanical properties of alloy 718 produced by laser powder bed fusion with different processing parameters

Research output: Contribution to journal › Article › Research › peer-review

A full view of the interfacial behavior between the liquid Al and solid Ni by synchrotron radiation

Research output: Contribution to journal › Article › Research › peer-review

Projects

Additive manufacture of bone phantoms for predicting orthopaedic outcomes

Project: Research

Nature-inspired electrochemical conversion of nitrogen to ammonia

Project: Research